Se habla español
Model:KM 238/5 - Scissor Boom Description:Scissor boom stand w/desk clamp. Includes 16 + XLR mic cable.Specs:Arm length: 39.4
KM238/5 BlackScissor boom stand w/desk clamp.Includes 16+ ft. XLR mic cable.
Designed for communication systems mobile and fixed station including police, fire, utilities, transportation, commercial, and industrial applications.Note: The 527B does not require DC power for operation; however, the 527C requires DC power (4 to 35 Vdc @ 16mA).
The Apex141 is a compact, small-diameter gooseneck podium microphone that offers flexible positioning
with a sleek, low-profile appearance. A uniform hypercardioid polar pattern delivers maximum off access
rejection for increased clarity. The integrated user switchable low-cut filter reduces pickup of lowfrequency
ambient noise and rumble offering maximum intelligibility.
Installation and Operation:
The Apex141 requires 9V to 52V phantom power for operation. Output is low impedance balanced. The
output connector mates with XLR-F cable connectors with the balanced signal appearing across Pins 2
and 3. Ground (shield) connection is Pin 1. Output is phased so that positive acoustic pressure produces
positive voltage at Pin 2, in accordance with industry convention.
The microphone is enclosed in a rugged housing with a low reflectance black finish. It features an XLR
Male connector insert at its base, allowing it to be plugged directly into any typical XLR-F panel jack or
microphone cable. It is advised that the Apex141 be installed using the optional Apex-PM podium
shockmount plate for maximum performance and to isolate microphone.
The provided foam windscreen simply slips over the element, effectively reducing wind noise and
popping. An integrated 100Hz high-pass filter provides easy switching from a flat frequency response to
a low-end roll-off. The roll-off position reduces the pickup of low-frequency ambient noise. To engage
the filter, use tip of a paperclip or other small pointed instrument to slide the switch to the roll-off position
Type: Back Electret Condenser
Polar Pattern: Hypercardioid
Frequency Response: 50Hz to 18kHz
Sensitivity: -54dB +/- 3dB (0dB = 1uBar @ 1kHz)
Output Impedance: 60 30% (at 1 KHz)
Power Requirement: 9 52 V Phantom Power
The CK 47 combines an 80 pickup angle, studio quality audio, and clean off axis response.
It is an ideal tool wherever studio-standard sound quality is required.
The CK 47 includes a W 70 windscreen.
Bass filter 250 Hz, -10 dB at 50 Hz Impedance <=600 ohms Recommended load impedance >=2,000 ohms Supply voltage 9 to 52 V phantom power to DIN/IEC Current consumption <3 mA Connector 3-pin male XLR Finish matte dark grey Dimensions max. dia.: 20 mm (0.8 in.), length: GN 15 E: 235 mm (9 in.), GN 30 E: 380 mm (14.9 in.), GN 50 E: 572 mm (22.4 in.) Net weight GN 15 E: 112 g (3.9 oz.), GN 30 E: 160 g (5.6 oz.), GN 50 E: 160 g (5.6 oz.) Shipping weight GN 15 E: 396 g (13.9 oz.), GN 30 E: 530 g (18.7 oz.), GN 50 E: 535 g (18.8 oz.) Integrated, switchable bass cut Integrated XLR connector
AKG ACOUSTICS GN30E - 15" Gooseneck with XLR Output for Discreet Acoustics Capsule Modules. Comes with an integrated connector for quick setup and takedown, integrated 200 Hz bass rolloff filter and LED ON/OFF jumper
M1250 with Flexible gooseneck (6", 12" or 18")
The MicroPod series microphones come with the the option of a 6 inch, 12 inch or 18 inch flexible gooseneck and the M1250 microphone. The M1250 has RFI immunity and is available in cardioid or hypercardioid. The flexible gooseneck is designed using lightweight tube with a mini-XLRf connector on the top and a standard XLRm connector on the base. There are flexible goosenecks at each end of the tube. There is balanced cable inside the tube, with pin 2 hot inrespect to pin 3. The XLRm base can fit into any XLRf connector.(ATS10 table stand sold separatly)
50Hz - 18kHz
@1k 10 mV/Pa
Shure MX418D/C Desktop Mic 18" Cardioid18-inch (45 cm) Cardioid Desktop Gooseneck Condenser Microphone, Attached 10-foot (3 m) XLR Cable, Logic Functions, Programmable Switch and LED Indicator, Attached Desktop Base.
The Microflex Gooseneck microphones bring a whole new meaning to the word flexible. Beyond their fully adjustable goosenecks lies a new level of flexibility the new Microflex interchangeable condenser microphone cartridge. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a broad variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the new Microflex product line for enhanced convenience and consistent sound.
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum Interchangeable cartridges provide the right polar pattern for any application Balanced, transformerless output for increased immunity to noise over long cable runs Programmable on/off switch and LED on/off indicator New brighter LED improves visibility under strong ambient lighting Logic input and output terminals for remote control or use with automatic microphone mixers Snap-fit foam windscreen
Frequency Response: 50Hz to 17kHz Polar Pattern: Cardioid Output Impedance: rated at 150 ohms (180 ohms actual) Maximum SPL: 123 dB Signal to Noise Ratio: 65.0 dB Dynamic Range: 94 dB Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
This double-gooseneck cardioid condenser microphone with integral power module and 5/8"-27 adapter-mount is ideal for boardroom, school, government, house of worship and other installed applications. Featuring a wide-range condenser element with low-mass diaphragm for superior performance, the microphones self-contained electronics eliminate need for external power modules. Available in two lengths: 15.79" (PRO 47TL) and 12.40" (PRO 47T).
* Wide-range condenser element with low-mass diaphragm for superior performance
* Self-contained electronics eliminate need for external power modules
* Flat, smooth frequency response
* Quiet, fixed-placement, long-life gooseneck
* Direct mounts to any 5/8"-27 stand, or to included threaded mounting stud
* 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
* Overall length of 15.79" (401.0 mm)
* Also available in a 12.40" (315.0 mm)-long version as PRO 47T
SPECIFICATIONS ELEMENT Fixed-charge back plate, permanently polarized condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 70-16,000 Hz OPEN CIRCUIT SENSITIVITY -37 dB (14.1 mV) re 1V at 1 Pa IMPEDANCE 100 ohms MAXIMUM INPUT SOUND LEVEL 134 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical) 106 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 66 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS 9-52V DC, 2 mA typical WEIGHT 2.4 oz (67 g) DIMENSIONS 15.79" (401.0 mm) long, 0.47" (12.0 mm) head diameter OUTPUT CONNECTOR 3-pin XLRM-type on cable CABLE 9.8' (3.0 m) long, permanently attached ACCESSORIES FURNISHED AT8146 windscreen; AT8425 5/8"-27 threaded mounting studAUDIO-TECHNICA CASE STYLE M22
U857Q Cardioid Condenser Quick-Mount Gooseneck Microphone
Ideal for conference centers, boardrooms, courtrooms, houses of worship, and other installed applications, the U857Q is designed to plug directly into a panel- or desk-mounted XLRF-type connector. This cardioid condenser quick-mount gooseneck microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica's UniGuard innovations. The 14.47 long microphone features an ultra-flexible small-diameter gooseneck and accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.
Designed for high-quality sound reinforcement, professional recording and broadcasting
Superior off-axis rejection for maximum gain before feedback
UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no memory permits quick positioning into desired shape
UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
Self-contained electronics eliminate need for external power module
Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
Two-stage foam windscreen yields dramatically improved resistance to P-pops and other breath blasts
Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
SPECIFICATIONS ELEMENT Fixed-charge back plate, permanently polarized condenser POLAR PATTERN Cardioid
FREQUENCY RESPONSE 30-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY –39 dB (11.2 mV) re 1V at 1 Pa
IMPEDANCE 250 ohms
MAXIMUM INPUT SOUND LEVEL 139 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 115 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
SWITCH Flat, roll-off
WEIGHT 5.1 oz (144 g)
DIMENSIONS 14.37" (365.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74" (18.9 mm) base diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
OPTIONAL INTERCHANGEABLE ELEMENTS UE-H hypercardioid (100°); UE-O omnidirectional (360°); UE-UL UniLine™ (90°)
ACCESSORIES FURNISHED AT8153 two-stage foam windscreen; AT8662 shock mount
AUDIO-TECHNICA CASE STYLE M34
U857QL Cardioid Condenser Quick-Mount Gooseneck Microphone
The 18.94" version of the U857Q, the U857QL cardioid condenser quick-mount gooseneck microphone is designed to plug directly into a panel- or desk-mounted XLRF-type connector. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard innovations. It features an ultra-flexible small-diameter gooseneck and accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.