Need Help? Call 877-778-7845Se habla español
Hosa GPM103 Female Stereo 3.5 mm Mini to Male Stereo 1/4" Phone Adapter
Dominator microphone cables offer Neutrik connectors with unsurpassable connectors and contacts, combined with several proprietary RapcoHorizon Company wires. Hear the difference today!
Pro-Series Molded Mil-Grade PE Rack Case; 4U, 19" Deep
The Gator mixer bag series comes in all the sizes to fit the popular mixers on the market today. The exteriors are made out of high impact 600D polypropylene material with super-size #10 zippers, removable shoulder strap and web handles. An external accessory pocket fits cables and accessories. The interior is constructed of a rugged tricot material with 5 MM of spongy foam protection. The G-MIX-B series of bags is perfect for the small compact mixers, drum machines and various support accessory products.
G-MIX-B-1212 12" X 12" X 4 Padded Mixer Bag
Kaces 46" rolling hardware bag is designed to hold a massive amount of stands and hardware, up to 150lbs worth. Made from tough, tear-resistant, reinforced 600D polyester on a heavy duty foundation of plastic and plywood paneling that is designed to withstand the rigors of the road. Rugged, hard plastic wheels are recessed into the bottom for better durability and easy rolling.
Includes rigid plastic protection strips on the bottom, a tear-resistant "no snag" lining, interior straps to secure hardware, industrial strength webbed handles at both ends, large side and end pockets, and a padded shoulder strap. 1 year limited warranty.
The G-PA TRANSPORT-LG fits most portable PA systems like the Passport 300 and 500 is a hybrid lightweight wood and nylon case with built-in wheels and retractable a retractable handle with a a removable internal divider. It also has a large, external pocket and reinforced web handles for when you're ready to take it up on stage or have to deal with stairs.
While people are sleeping in their bedrooms, you can be jamming in yours. No one's going to hear you and shut you down just when things are starting to get good. The JamHub experience is for every band on the planet, so our BedRoom studio is affordable for up to 5 musicians and their instruments, mics and headphones.
Take the stage whenever, wherever with JamHub GreenRoom. You've played long enough to know that the better the rehearsal, the better the performance. GreenRoom is the perfect system to let you rehearse more often, without volume wars, and nail that song faster. When you get to the green room you'll be ready for show time.
The PV® 10 compact mixer offers value and easy-to-use features. Reference-quality mic preamps with an astonishingly low 0.0007% THD make the PV 10 mixer excellent for live sound or project studio recording. The PV 10 mixer includes three-band EQ, effects send and monitor send on each channel. With six mono and two stereo channels, the PV 10 offers a total of eight inputs. The master section includes 48 volt phantom power, built-in digital effects, effects send and return, assignable tape input and a unique master contour EQ that helps sweeten the mix. Dual XLR and 1/4 inch outputs allow the PV 10 to easily connect with other equipment. Sleek metal design adds strength, durability and looks like no other mixer in its class. Rackmount kit available.
Features Built-in DSP effects processor 6 RQ™ (reference-quality) low noise microphone inputs with insert points Channels 7/8 and 9/10 w/ dual switchable stereo line inputs 3-band EQ on all channels LED clip, signal, mute indication 1 pre-fader monitor send 1 post-fader effects send Precision 60 mm faders on input channels and stereo master outputs Control room output Global 48 volt phantom power, tape to control room and tape to mix assignments Stereo outputs with balanced 1/4" TRS and XLR connectors Rugged console design Universal switching power supply
Specifications Dimensions 12.125" W x 3.5" H x 14.75" D Weight 9.3 lbs.
The lightweight and inexpensive PR Sub makes it ideal for augmenting the bass for live music, DJ, speech or other music applications. It is housed in a rugged, injection-molded enclosure with a steel grille to provide driver protection and a professional appearance. It utilizes a 15 inch heavy-duty woofer with a 2 3/8 inch voice coil and 50 oz. magnet and is rated at 400 watts program and 800 watts peak. It is simple to use, just connect your full-range signal and its internal crossover does the rest. The PR Sub provides an easy solution to get the extra low-end you want out of your system at a price anyone can afford. It can be used on the floor, on a stand or be flown via top and bottom flying inserts. Connections are made via two 1/4 inch phone jacks in parallel to accommodate daisy-chaining. Add one to your system now.
15" heavy-duty woofer with 2 3/8" voice coil and 50 oz. magnet 300 Watts program/600 Watts peak power handling Lightweight trapezoidal enclosure Durable, plastic, injectionmolded enclosure Heavy duty steel grille Molded-in pole mount Top and bottom flying point inserts
The PR Sub is a subwoofer for sound reinforcement consisting of a heavy-duty 15" woofer in a vented enclosure. The lightweight-yet-rugged injection-molded plastic enclosure with molded-in standmount cup facilitates portable use for augmenting the bass for live music, DJ use or speech. A black powder-coated steel grille provides driver protection and a professional appearance.
The PR Sub speaker system is rated at 300 Watts program power handling, and the woofer features a 2 3/8" diameter voice coil and a 50 oz. magnet for excellent long term reliability. Two 1/4" phone jack input connectors make hook-up and daisy-chaining to other speakers a breeze.
System Type: Self powered 10", two-way, bass-reflex design Frequency Range (-10 dB): 58 Hz - 18.5 kHz (EQ in Flat position) Frequency Response (3 dB): 70 Hz - 17 kHz (EQ in Flat position) Coverage Pattern: 100 H x 60 V nominal Directivity Index (DI): 9 dB Directivity Factor (Q): 8 Crossover Frequency: 1.8 kHz System Power Rating: 280 W continuous, 560 W peak LF Power amp: 220 W continuous at driver impedance HF Power amp: 60 W continuous at driver impedance Distortion: Less than 0.1% at rated power Maximum SPL: 121 dB Signal indicators: Limit: Red LED indicates input overload condition Signal: Green LED indicates signal present Mic/Line: Red LED indicator Input Gain (input 3): Mic position: -Infinity to +40 dB Line position: -Infinity to +4 dB (+20 dBu Max signal input) Input Gain (input 1 & 2): -Infinity to +4 dB (+20 dBu Max signal input) Input Impedance: 64 K Ohms (balanced), 32 K Ohms (unbalanced) Boost EQ: LF +3 dB Shelving Filter @ 150 Hz HF +2.5 dB Shelving Filter @ 4 kHz Low Cut Filter: Preset high pass @ 120 Hz LF Driver: 1 x JBL 261F 254 mm (10 in) Differential Drive integrated woofer with dual 1.5 voice coils. HF Driver: 1 x JBL 2414H-1 25.4 mm (1 in) neodymium compression driver Input 3 connector: Balanced XLR / inch TRS combo jack with XLR loop through, Input 1 & 2 connector: inch TRS jack Output (Loop/Mix switch): Balanced male XLR, +20 dBu (peak) o/p level in MIX position XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND) Limiting/Protection: Dynamic Limiter Enclosure: PP impact copolymer, multi-purpose main & monitor orientation. Handles: One on top with rubber grip Suspension / Mounting: 36 mm pole socket with stabilizing screw, 3 x M10 suspension points, 1 x M10 pull-back point Grille: Powder coated perforated steel with acoustically transparent black screen backing. AC input: 120 240 V, 50/60 Hz Dimensions (H x W x D): 490 mm x 313 mm x 262 mm (19.3 in x 12.3 in x 10.3 in)Net Weight: 7.7 kg (17 lb)
Raise or lower your speaker cabinets using either the removable manual handle on this stand or a power drill. Power drill not included.
The Shure PGX Digital Series wireless systems combine the convenience of single touch remote channel setup with the reliability of 24-bit digital operation. Clean RF (Radio Frequency) performance, stable channel operation and low noise are all attributed to the PGX Digital's 24-bit / 48kHz digital operation. The user friendly yet rugged design of the Shure PGX systems measure up to provide years of reliable use in halls, houses-of-worship, clubs, theaters, restaurants, bars, etc. This system includes the receiver, bodypack transmitter and 1/4" phone instrument cable for use with guitar and bass.
Rapidly adding to its groundbreaking and industry-standard EON series portable loudspeakers, JBL is introducing EON300 series portable PA loudspeakers at AES. The EON300 series puts the next generation of EON systems within reach of an even broader range of users, delivering the same fundamental design features, sonic performance and integrated utility as the new EON500 series, at an even more affordable price.
The EON305 is a 15-inch, two-way, passive, portable speaker system. It is a light weight loudspeaker system capable of fullbandwidth reproduction at high levels. The EON315 is comprised of a 380 mm (15 in) JBL woofer, a 25.4 mm (1 in) neodymium high frequency compression driver coupled to a 100 H by 60 V waveguide. The system will handle 250 watts continuously and 1000 watts peak
The advanced network design accurately shapes the frequency response delivering coherent summation in the crossover region resulting in extremely consistent on and offaxis performance. The use of premium components ensures the network will handle high power levels without affecting the audio quality and integrated SonicGuard protection circuitry shields the high frequency compression driver from excess power without interrupting the systems performance. Dual Neutrik NL4 / " combo connectors not only offer input connector flexibility but also permit adding additional systems in parallel.
In addition to acoustic performance the EON315 features three full size deep-well handles, light weight, and balanced ergonomics. The new generation of EON products offers true portability and ease of handling. Five standard M10 rigging points and integrated pole mount socket increase the systems utility. The extremely rugged copolymer enclosure has been designed for main and 45 monitor orientation in the left and right hand configuration. A full screen-backed steel grille offers additional protection for both the woofer and compression driver components.
Specifications: System Type: 15", two-way, bass-reflex design Frequency Range (-10 dB): 38 Hz - 20 kHz Frequency Response (3 dB): 50 Hz - 18 kHz Coverage Pattern: 100 H x 60 V nominal Directivity Index (DI): 9 dB Directivity Factor (Q): 8 Crossover Frequency: 1.9 kHz System Power Rating: 250 W continuous, 500 W program, 1000 W peak Sensitivity (1w/1m): 98 dB Maximum SPL: 128 dB Nominal Impedance: 8 Ohms LF Driver: 1 x M115-8 380 mm (15 in) woofer HF Driver: 1 x JBL 2414H-1 25.4 mm (1 in) polymer diaphragm compression driver Input Connector: Parallel Neutrik NL4 / " combo connectors. HF Protection: SonicGuard Circuit Enclosure: PP impact copolymer, multi-purpose main& monitor orientation. Handles: One left/right side, one on top. Suspension / Mounting: 36 mm pole socket with stabilizing screw, 4 x M10 suspension points 1 x M10 pull-back point. Grille: Powder coated perforated steel with acoustically transparent black screen backing. Dimensions (H x W x D): 685 mm x 438 mm x 366 mm (27 in x 17.3 in x 14.4 in)Net Weight: 15 kg (33 lb)
Ideal for guitar amps, drums, guitar or bass speakers cabinets and lots of other applications. The stand is adjsutable up to 15.5 in. and the boom extends up to another 19 in. Convenient design and durable construction with a high-impact plastic leg housing make this stand a tremendous value. Its folding legs allow for the most compact storage.