- 2 mic/instrument inputs and 6 mic/line inputs
- Class A XMAX mic preamplifiers
- 2 balanced insert send/return loops (Ch. 1 & 2)
- 24-bit, 96 kHz sampling
- MIDI, S/PDIF, and word clock I/O
- JetPLL jitter-elimination technology
- Zero-latency monitoring
- Mac- and Windows-compatible
- Expandable: Daisy-chains with any FireStudio-series interface
- Includes Studio One Artist DAW software and 6+ GB of third-party resources
- 2 mic/instrument inputs and 6 mic/line inputs
- Class A XMAX mic preamplifiers
- 2 balanced insert send/return loops (Ch. 1 & 2)
- 24-bit, 96 kHz sampling
- MIDI, S/PDIF, and word clock I/O
- JetPLL jitter-elimination technology
- Zero-latency monitoring
- Mac- and Windows-compatible
- Expandable: Daisy-chains with any FireStudio-series interface
- Includes Studio One Artist DAW software and 6+ GB of third-party resources
Computer System Requirements
Below are the minimum computer system requirements for your FireStudio Project.
Windows
- OS: Microsoft Windows XP SP1
- Computer: Windows compatible computer with FireWire port.
- CPU/Clock: Pentium, Celeron with 1.6Ghz or higher
- Memory(RAM): 512 MB (1 GB recommended)
Macintosh
- OS: MacOS X 10.4.x or later
- Computer: Apple Macintosh series with on-board FireWire port.
- CPU/Clock: PowerPC G4/Dual 1 GHZ or faster, all Intel-based Mac models.
- Memory(RAM): 512 MB (1 GB recommended)
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) that you might experience while monitoring audio or MIDI signals.
Monitor resolution for both PC and Macintosh should be no lower than 1024x768 pixels.
FireStudio Project Specifications
Microphone Preamp
Type
XLR Female Balanced
Frequency Response (0.5 dB)
20 Hz to 50 kHz
Frequency Response (3.0 dB)
20 Hz to 150 kHz
Input Impedance (Balanced)
1600
THD+N (unwtd, 1kHz @ +4 dBu Output, Unity Gain
< 0.0003%
EIN (unwtd, 55dB Gain, 150 Input, 20Hz to 22kHz
-126 dBu
S/N Ratio (Unity Gain, unwtd, Ref. = +4 dBu, 20Hz to 22 kHz
> 101dB
Common Mode Rejection Ratio (1 kHz, 55 dB Gain)
> 55dB
Gain Control Range ( 1dB)
-4 dB to 50dB
Maximum Input Level (Unity Gain, 1 kHz @ 0.5% THD+N)
+14 dBu
Signal Level LEDS
Red / Clip (0.5 dB)
Yellow (0.5 dB)
Green (0.5 dB)
+10 dBu (o dBFS)
+4 dBu (-6 dBFS)
-30 dBu (-40 dBFS)
Phantom Power (2 VDC)
+48 VDC
Instrument Input (channels 1 & 2 only)
Type
XLR Female Balanced
Input Impedance
1 M
Line Inputs
Type
XLR Female Balanced
Frequency Response (0.5 dB)
20 Hz to 50 kHz
Frequency Response (3.0 dB)
20 Hz to 150 kHz
Input Impedance (Balanced)
10 K
THD+N (unwtd, 1kHz @ +4 dBu Output, Unity Gain
< 0.0003%
S/N Ratio (Unity Gain, unwtd, Ref. = +4 dBu, 20Hz to 22 kHz > 101dB
Gain Control Range (1 dB) -16dB to +16dB
Maximum Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) +10 dBu
Maximum Input Level (Minimum Gain, 1 kHz @ 0.5% THD+N) +22 dBu
Line Ouputs (including Preamp Output, General Purpose Outputs and Main Outputs)
Type " TRS Balanced
Output Impedance 51
Headphone Output
Type " TRS Active Stereo
Maximum Output 150 mW/CH @ 60 Load
Frequency Response (1.0 dB) 10 Hz - 70kHz
Digital Audio
ADC Dynamic Range (Awtd, 48 kHz Sample Rate) 114 dB
DAC Dynamic Range (Awtd, 48 kHz Sample Rate) 114 dB
Bit Depth 24
Reference Level for 0dBFS +10 dBu
Internal Sample Frequency Selections (kHz) 44.1, 48, 88.2, 96
External Sample Frequency Input S/PDIF
Power
Input Connector Type IEC
Input Voltage Range 90 to 230 VAC
Power Requirements (Continuous) 20W