NX - Not all man made materials are created equal, acoustically speaking. . .
NX series enclosures are manufactured using tough, lightweight, low resonance, variable density composite materials. In addition they are UV and moisture resistant. The enclosure itself has been moulded for maximum versatility.
The trapezoid box is ideal for mounting in arrays, or for use as a monitor, with recessed input jack plate and an ideal wedge monitor angle that was taken into account in the initial design. Neither application was considered as an afterthought. Stand mount and flying hardware are also available.
Capitalizing on the light weight moulded cabinet design and equipped with a proprietary neodymium woofer, Active versions of the NX series have been added to the line.
Even when fully loaded with the unique processing crossover, CTLTM high frequency protection circuits and TWO amplifiers that drive the bi-amped system, the NX550P is a 550 watt powerhouse that still weighs in at an easily managable 47 lbs, the lightest in its class by a long shot. The passive 2-Way NX88 weighs in at an ultra-low 17lbs, our most compact loudspeaker yet.
The unique cabinet design means the NX series can easily be used as a front of house PA cabinet, or as a powered, bi-amped wedge monitor.
The NX Series cabinets now have a smoother, more rugged and more professional final finish. Select cabinets are now available in either the standard black finish for touring or club system PA applications, or in a white and paintable finish for fixed installations.
The NX750P is the culmination of all Yorkville's research and development of molded technology to this point in time. The injection molded loudspeaker enclosure is loaded with a high performance 15-inch neodymium woofer and an 80ºx 50º rotatable custom ABS waveguide horn.
It delivers 750 watts and uses the same combination of amplifier technologies that have already been proven over the years in the NX550P. The horn amplifier uses a two-tier class H linear technology, allowing the horn to produce loud clean transients to keep up with the high output of the woofer. The two-tier amplifier technology is a lower weight, more efficient amplifier with higher headroom and lower operating temperature. It is a perfect solution for powering the top end.
A newly designed switching amplifier drives the bottom end or woofer in the NX750P. The woofer or low frequency amplifier uses Class D switching technology to reduce overall weight of the amplifier section. This technology is similar to the power supply found in the new Yorkville A4.4 power amplifier, the EF500P active enclosure and new MicroMix M8 powered mixer.
Like the NX550P, careful consideration was taken in the design process to ensure the NX750P can easily be used in any orientation, and close to walls, floors and in close arrays with multiple cabinets. Particular care was taken designing the components to reduce extraneous heat production.
The NX750P has a versatile direct input system and built-in mixer. The mixer allows the loudspeaker to be used directly with a microphone and / or line source. The loop output allows additional active cabinets to be driven from one cabinet's mixer stage, or a series of cabinets to be driven from one source. If desired, the end user can combine multiple NX750P's using the mixer inputs on each cabinet and coupling the loop outputs. In this simple example you would have the ideal presentation system with two microphone inputs, two line inputs.
The microphone input has equalization and high pass filtering appropriate for vocal applications. The trim control allows looped cabinets to be individually adjusted in level. The NX750P has user defeatable 100Hz high pass filters allow either cabinet to be used more efficiently with any Yorkville active subwoofer.
Ultra-light injection molded Polypropylene construction
Dual purpose full range and wedge monitor format enclosure
Ultra-clear reproduction throughout bandwidth
Lightweight, high efficiency, high tech, 750 Watt Bi-amped power module
Proven TX style processing and component protection
+6dB/-infinity input trim control for individual cabinet level adjustment
XLR and TRS inputs / outputs for easy connection and looping
Multi-input source mixer for direct inputs
Direct microphone input with level control
Two-way overall EQ controls
Light-weight 15" Neodymium Woofer
High quality 1.5" High Frequency driver
Next generation woofer / driver / horn technology
Integrated flying hardware (3/8" threaded holes)
Tough, full length metal grille
Recessed Mixer panel
System Type 2-Way
Active or Passive Active
Program Power (Watts) 750
Biampable Self Powered
Biamp Operation Only Yes
Max SPL (dB) 127
Frequency Response (Hz +/- 3db) 50 - 26k
Crossover Frequency (Hz) 1400
Driver Configuration 15 inch / 1.5 inch
HF Driver(s) 1 inch Throat, Ceramic Magnet, 1.5 inch Polyester voicecoil
HF Program Power (Watts) 100
HF Dispersion (o
H x o
V) 80 x 50 rotatable
LF Driver(s) 15 inch Neodymium Magnet 3 inch voicecoil
LF Program Power(Watts) 650
Total Power (Watts) 750
HF Amplifier Type Two Tier Class H
LF Amplifier Type Class D
Power Cable Yes
Power Switch Yes
Inputs - 1/4" Jacks 2 (line input) 2 (link in/out)
Inputs - XLR 1 (mic) 2 (line in/out)
Input Sensitivity (Vrms Sine) +4dBv / 1.23V
Mixer Controls Mixer on/off switch
Level Controls +6dB/-infinity Main Volume
EQ Controls 100Hz HP Filter (LF Rolloff)
LED Indicators Power/Clip/Limit
Other Controls / Features Side recesses for ease of lifting
Flying Hardware 2 (Top), 1 (Bottom), 2 (Pullback)
Optional Flying Hardware NX Flyware
Bar Handles 1 (Side)
Pole Mount Adapter (1 3/8"-3.5cm) Yes
Enclosure Materials Injection molded Polypropylene
Grille Perforated Metal
Dimensions (DWH xbackW, inches) 15 x 22 x 32 x 9.5
Dimensions (DWH xbackW, cm) 38 x 56 x 84 x 24
Weight (lbs/kg) 62 / 28.2