Yorkville AP4K Power Amplifier

Yorkville AP4K

Model #AP4K


List Price:$1,399.00
  • Free Shipping Over $99*
  • No Tax Outside FL and PA!
  • 30-Day Guarantee!
Questions about this product?
Click to ask a Product Specialist!


Capable of delivering 1800 watts per channel into either a 2 or 4 ohm load, Yorkville Sound's new AudioPro AP4K uses proven Class-H technology and advanced protection circuitry to provide unmatched long term reliability in the field.

An impedance mode switch on the back panel of the amplifier allows the user to select full output power into either a two or four ohm load for maximum application flexibility. This means this compact two rack space amplifier can deliver up to 3600 watts of clean, pure power into either 4 or 8 ohm loads (bridged), making it a perfect solution for virtually any touring live sound, club system or installation.

The internal signal path has been optimized and a toroidal transformer is used in the AP4K design - both serving to reduce hum and noise in practical real-world applications. It's three-tier Class-H design approaches efficiency normally associated with Class-D technology; yet provides the superior transient response and low distortion of the best analog designs.

Amplifier class Class-H
Continuous Average Power @ 8 Ohms BCD (Watts) 600 (x2)(2ohm mode)/1000 (x2)(4ohm mode)
Continuous Average Power @ 4 Ohms BCD (Watts) 1000 (x2)(2ohm mode)/1800 (x2)(4ohm mode)
Continuous Average Power @ 2 Ohms BCD (Watts) 1800 (x2) (2ohm mode)/ NA in 4ohm mode
Continuous Average Power Bridged BCD (Watts) 3600 @ 4 ohms /3600 @ 8 ohms
Burst Average Power @ 8 Ohms BCD(Watts) 1000 (x2)(2ohm mode)/1800 (x2)(4ohm mode)
Burst Average Power @ 4 Ohms BCD (Watts) 1800 (x2)(2ohm mode)/3500 (x2)(4ohm mode)
Burst Average Power @ 2 Ohms BCD (Watts) 2500 (x2)(2ohm mode)/ NA
Burst Average Power Bridged BCD (Watts) 5000 @ 4 ohms / 7000 @ 8 ohms
Frequency Response (Hz, +/- 1dB) 20-20,000
Hum and Noise (un / Aweighted -dB) -100/ -115
THD -1kHz- 4 OHMS 0.01
THD - 20Hz-20kHz, 4 Ohms less than 0.1%
Slew Rate (V/uS) 25
Slew Rate Bridged (V/uS) 50
Damping Factor (30 Hz - 400 Hz @ 8 Ohms) 600
Crosstalk (1kHz / 20Hz-20kHz) -75 / -60 dB
Input Impedance - Bal/Unbal (Ohms) 10,000/5,000
Input Sensitivity (Vrms) For Full Power Out 1.0V (2ohm mode) / 1.4V(4ohm mode)
Max Voltage Gain (dB) 36
CMRR @ 60Hz (min/typ) 48/56 dB
Stereo / Bridge (S/B) S/B
Protection DC, Load, Thermal
Limiter Peak
High Pass Filter 50Hz, 18dB Octave
Cooling Internal Fans
Cooling Path Front to Rear
Inputs - XLR 2
Inputs - 1/4" Jacks 4
Outputs - Speakon 4-pin 2
Outputs - Binding Post 2
Power Consumption (typ/max) 1130/1800 Watts
Rack Spaces 2
Transformer Type Toroidal
Exterior Finish Baked, Black Painted
Dimensions (DWH /D fm ears, inches) 16.5 x 17.3 x 3.5 x 14.9
Dimensions (DWH /D fm ears, cm) 41.5 x 43.9 x 8.9 x 37.85
Weight (lbs / kg) 41 / 18.5

Customer Reviews

Click here to write your own review.

No reviews have been written for this product.