Shure PGX14/BETA98H Instrument Wireless System

SHURE PGX14BETA98H Details ^top

It's never been easier to go wireless – and sound like a pro. Shure's new PGX|Performance Gear Wireless brings the superior sound of Shure Microphones together with innovative setup features in eight easy-to-use packages. Durably constructed, with 12 compatible systems (multiple bands) and included carrying case, PGX|Performance Gear is the perfect system for performers on the go who want worry-free performance, every time.

PGX|Performance Gear Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

Model: PGX14/BETA98H
WB98H/C Clip-On Instrument Mic
PGX1 Bodypack Transmitter
PGX4 Diversity Receiver

Beta98H/C
The Shure Beta 98H/C (also available as the WB98H/C for use with wireless systems) is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

The Beta 98H/C features transformerless preamplifier circuitry, which improves linearity across the full frequency range. The pickup pattern of the Beta 98H/C provides high gain-before-feedback and excellent rejection of unwanted noise. Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.

The microphone is supplied with a snap-on windscreen, a storage bag, a gooseneck angle brace, and a cable management device. The preamplifier is attached to the microphone via a 10-foot high-flex cable and requires 11-52 Vdc phantom power.*

*Where phantom power is not available, use the Shure WB98H/C with the MX1BP battery-powered preamplifier.

• The Beta98H/C features a 3m (10 ft.) high-flex cable with attached preamplifier (XLR connection).

• Tailored frequency response for open, natural sound reproduction

• Compact, lightweight construction provides a low degree of visibility

• Interchangeable microphone cartridges are available: RPM108 - Cardioid cartridge RPM110 - Supercardioid cartridge

• Gooseneck, ratcheting swivel joint, and gooseneck angle brace allow for optimum placement and fixed positioning

• Legendary Shure ruggedness and reliability

PGX1
Designed to meet the needs of traveling performers, Shure's PGX1 can be used with headworn, lavalier, or instrument microphones, or with guitars or basses.

• Automatic Transmitter Setup

• Multi-function LED Indicator ((power, lockout, mute, low battery)

• -10db pad

• 2 AA batteries provide 8 hours of continuous use

• 18 MHz operating range

PGX4
Shure's PGX4 receiver makes wireless setup a snap. With features like Automatic Frequency Selection and Automatic Transmitter Setup, the PGX4 offers the best in wireless to performers on the go.

• Automatic Transmitter Setup

• Automatic Frequency Selection

• 90 Selectable frequencies across 18 MHz bandwidth

• 1/4 wave antennas

• Microprocessor- controlled diversity

• Channel display LED

• XLR and 1/4" outputs

SHURE PGX14BETA98H Documentation ^top

Click here for Quick Start Guide (pdf)
Click here for User Guide (pdf)
Click here for Wireless Feature Comparison (pdf)
Click here for Beta98H/C User Guide (pdf)

SHURE PGX14BETA98H Specs ^top

Specifications
System
Working Range 100m (300 ft.)
Note: actual range depends on RF signal absorption, reflection, and interference
Audio Frequency Response
+/– 2 dB
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.)
Total Harmonic Distortion
Ref. +/– 33 kHz deviation, 1 kHz
tone
0.5%, typical
Dynamic Range >100 dB A-weighted
Operating Temperature
Range
–18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range
Transmitter Audio Polarity Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.

PGX1 Bodypack Transmitter
Audio Input Level -10 dBV maximum at "mic" gain position
+10 dBV maximum at 0dB gain position
+20 dBV maximum at -10dB gain position
Gain Adjustment Range 30 dB
Input Impedance 1 MΩ
RF Transmitter Output 30 mW maximum (dependent on applicable country regulations)
Dimensions 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight 81 grams (3 oz.) without batteries
Housing Molded polycarbonate case
Power Requirements 2 “AA” size alkaline or rechargeable batteries
Battery Life >8 hours (alkaline)

PGX4 Receiver
Dimensions 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
Weight 327 g (11.5 oz.)
Housing ABS
Audio Output Level
Ref. +/– 33 kHz deviation with 1
kHz tone
XLR connector (into 600 Ω load): –19 dBV
1/4 inch connector (into 3000 Ω load): –5 dBV
Output Impedance XLR connector: 200 Ω
1/4 inch connector: 1kΩ
XLR output Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Sensitivity –105 dBm for 12 dB SINAD, typical
Image Rejection >70 dB, typical
Power Requirements 12–18 Vdc at 150 mA, supplied by external power supply

Beta98H

Type: Condenser (electret bias)

Polar Pattern: Cardioid

Frequency Response: 20Hz-20kHz

Output Impedance: Rated at 150 ohms (actual)
Recommended minimum load impedance: 1 kohm

May be used with loads as low as 150 ohms with reduced clipping level


Output Level (0 dB = 1 volt per Pascal): Open Circuit Voltage: -56 dB (1.6 mV)

Output Clipping Level (at 1kHz, THD <1%)
2.5 kohm load: 11 dBV (3.5 V)

1.0 kohm load: 3 dBV (1.4 V)


Maximum SPL
2.5 kohm load: 163 dB

1.0 kohm load: 155 dB


Dynamic Range (maximum SPL to A-weighted noise level): 132 dB (2.5 kohm load)

Output Noise (equivalent SPL): 31 dB typical, A-weighted

Signal-to-Noise ratio: 63 dB at 94 dB SPL (IEC 651)

Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output connector.

Recommended Operating Voltage: 11 to 52 Vdc Phantom

Environmental Conditions
Operating Temperatures: –7° C to 49° C (20° F to 120° F)

Storage Temperatures: –29° C to +74° C (–20° F to 165° F)

Relative Humidity: 0 to 95%

Net Weight: Microphone w/cable and preamplifier: 156 g (5.5 oz.)

SHURE PGX14BETA98H Selection_Guide ^top

Click here for Selection Guide