MusiciansBuy Instruments and Pro Audio Gear free shipping
877-778-7845
Log In View Cart Track Your Order Help Contact Us


Details Specs More Info 

Details

CHANNEL-1
INPUT-1: Combo input designed for both MIC level (Balanced XLR) or Instrument level (1/4”) signals.
BASS: Adjusts the amount of cut or boost in the low frequency range.
TREBLE: Adjusts the amount of cut or boost in the high frequency range.
VOLUME: Controls the overall volume level of CHANNEL-1.

CHANNEL-2
INPUT-2: Combo Input designed for both MIC level (Balanced XLR) and Instrument level (1/4”) signals.
CH-1 – CH-2: (DIGITAL EFX Assign): This 3 way toggle switch allows the digital effects to be routed to CH-1, CH-2, or if in the middle position will supply effects for both channels.
LEVEL: (DIGITAL EFX) Controls the amount of digital effect mixed in to the guitar signal from 0% to 50%
MODE: (DIGITAL EFX) This is a rotary encoder, which selects 1 of 16 different digital effects.
VOLUME: Controls the overall volume of CHANNEL-2.
BASS: Adjusts the amount of cut or boost in the low frequency range.
TREBLE: Adjusts the amount of cut or boost in the high frequency range.
NOTCH FILTER HZ: Provides selectable frequency shift of the 18db cut NOTCH FILTER from 100Hz - 350Hz to eliminate resonant feedback.
NOTCH FILTER ON/OFF: - Enables or disables the notch filter control.
SHAPE ON/OFF: This toggle switch enables or disables the SHAPE control. The shape control is a mid dip control. In the on position the mid frequencies will be cut and the high and low frequencies will be boosted.
MASTER VOLUME: Adjusts the overall loudness of the amplifier.
PILOT LIGHT/LIMIT INDICATOR: When GREEN, this LED indicates that the power is turned on. If the power amplifier reaches full power output, the on board Limiter will be enabled and this LED will turn RED. The Limiter allows the amplifier to be played at full power without unwanted distortion.

AG-50DS3 Back Panel
AC INPUT: Connect the female end of the AC line cord here. Connect the male plug to a suitable source of line voltage. Refer to the voltage information on the back of the amplifier for its voltage and current requirements. This connector also acts as the main fuse holder and includes a compartment for a spare fuse.

POWER: This rocker switch turns the AC power ON and OFF.

EFX F.S.: This jack is for connection to a shorting footswitch. When the switch is closed the on board Digital EFX will be bypassed.

EFX SEND: Output for supplying signals to external low-level effects or signal processing equipment.

EFX RETURN: Input for returning signals from external low-level effects or signal processing equipment.

MONO LINE OUT: This jack provides an unbalanced out put from the preamp that is post eq and post efx. This send can be used to feed a signal to a recording or sound reinforcement mixer. Additionally this output can be used to drive a slave amp such as the ULTRASOUND AG-50E.

STEREO LINE OUT: This jack provides an unbalanced stereo output that is post eq and post efx. This send can be used to feed a stereo signal to a recording or sound reinforcement mixer. Additionally, with the use of a “Y” cable, this stereo output can be used to drive 2 slave amps, such as the ULTRASOUND AG-50E in stereo mode.

HEADPHONES: This jack provides a stereo signal to drive headphones. When playing with one of the stereo effects such as Chorus or Flange, the stereo separation is very evident. The use of this jack will disengage the amplifiers internal speakers.

DIRECT OUT: This XLR jack provides a balanced output signal, post eq and post efx, used to feed recording or sound reinforcement equipment.

Digital Reverb Program List
(1) A. Room 3: Warm room reverb.

(2) B. Plate 1: Classic plate reverb.

(3) C. Bypass: No Effect.

(4) D. Rotary Speaker: Rotary speaker emulation.

(5) E. Chorus/Room 1: Chorus with reverb.

(6) F. Chorus/Room 2: Auto-wah guitar effect with reverb.

(7) G. Delay 1: 125ms slapback delay.

(8) H. Delay 2: 190ms delay for percussive arpeggios

(9) I. Hall 1: Bright hall reverb.

(10) J. Hall 2: Warm hall reverb.

(11) K. Room 1: Hardwood studio reverb.

(12) L. Room 2: Ambiance for acoustic mixes and synth sounds.

(13) M. Chorus: Stereo chorus.

(14) N. Flange: Stereo flanger for jet wash effects.

(15) O. Plate 2: Sizzling bright plate reverb.

(16) P. Plate 3: Short vintage plate reverb.



Ultrasound Amps AG-50DS3 Acoustic 50 Watt Amp with FREE OFFER!

Availability:

This item has been discontinued.

Check Guitars|Guitar Amplifiers|Acoustic Guitar Amplifiers| for related items

Try searching on:

You might also like:

Customer Reviews:

No Review has been written on this item.
Write the first Review of this product!

Our Happy Customers

"Chad, I played it last night for the first time. It was awesome. Also, your service was awesome as was the prices. I still can't believe the deal I received. Thanks so much and I will tell everyone I know to shop with you. I must say, this note is proof of your great customer service. I really like you guys!!! - Dale Traylor"

What they're saying at BIZRATE