Telex SR-400 MultiChannel Receiver

TELEX SR400 Details

The SR-400 16 channel receiver features an advanced digital PLL synthesizer to tune all 17 narrow-band frequencies offered in the 72-76 MHz band. Features include a backlit LCD channel display, low battery indicator, and compatibility with the E.D.R. feature in the ST-300 and PST-170 transmitters for improved sound quality. The receiver also includes a special high frequency contour filter and boost switch to increase the intelligibility of the audio signal. Additional features include a battery saving automatic power shutoff when the earphone is unplugged.

TELEX SR400 FAQs

Question: Are the new SoundMate Products compatible with the product I already have?

Answer: Yes, the new generation SoundMate products (ST-300, SR-400 and PST-170) are direct replacements for the existing products (ST-200, SR-100, and PST-16). The channels are the same and they are completely compatible with the older products. The bodypacks are also compatible with the current BC-100 battery charger.

Question: What is E.D.R. and how does it work?

Answer: E.D.R. stands for Enhanced Dynamic Range and this feature is available on the ST-300, PST-170 and SR-400. E.D.R. lowers the noise level and improves intelligibility for users by using a circuit called a compander. A compander COMPresses the signal in the transmitter and then exPANDs the signal in the receiver. Companding the signal results in larger signal levels compared to the noise floor. The E.D.R. function must be engaged in the transmitter and SR-400 receiver for proper operation.

Question: What does the function do on the SR-400?

Answer: The treble clef symbol ( ) represents the high frequency boost function. Most people with moderate hearing loss have more loss in the high frequencies than the low and that the high frequencies contain much of the important content for understandable speech. By engaging the HF boost, the SR-400 circuit raises the level of the high frequencies which lets the user hear better at a more comfortable overall volume.

Question: How do you adjust the audio input for the ST-300 with no switches or adjustments on the back panel?

Answer: The inputs can all be adjusted electronically from the front panel controls. Once you hit the SET button, all of the audio settings will appear in the right half of the LCD display. By pressing SET, the focus changes and the feature will flash, while it is flashing the UP and DOWN buttons can be used to turn the input off, adjust the attenuation, or select the balanced level input type (Mic, 600Ohm Line, or 70V line levels).

Question: How does it compare to the competitive product?

Answer: The new Generation SoundMate compares favorably in feature and price with the rest of the products in the market.

Question: Can I use Nickel Metal Hydride (NiMH) rechargeable batteries?

Answer: Yes, the BC-100 and all of the bodypacks are compatible with NiMH rechargeable batteries. In fact you will get twice the battery life with NiMH than with NiCd.

Question: How many SoundMate Channels can be used in one place at one time?

Answer: Under ideal conditions and using Normal RF transmit power, you should be able to use 8 different channels at once. Of course, building construction, location, and other interference sources can limit the number of systems and every application is slightly different.

Question: How many receivers do I need for a 500-seat church or theater.

Answer: The American Disabilities Act (ADA) recommends providing 4% of the total seats but 5% is easier to figure. For a 500-seat venue you should have 25 receivers as a minimum.

Question: Where should the ST-300 base transmitter be located?

Answer: Select a suitable location for the ST-300 transmitter that will allow accessibility to a 110 volt AC power outlet and within reasonable cable length (see table) to the program source. This location should also be in the same room as the 300 – 1500 foot transmission range where the receivers will be used. (If there is a conflict with these requirements see the Antenna Section). If the transmitter is mounted on a tabletop or counter (non-rack-mounted), allow for plenty of free space around the unit that is away from metallic structures and room to extend the rear-mounted antenna. If the ST-300 is rack mounted, it will require an external antenna (HGA-1) and a single (RM-S) or dual (RM-D) rack mount hardware kits. Mount the transmitter away from wireless microphone receivers, CD and DVD players, and computers that may cause noise and interference.

Question: Is there rack mount hardware available for the ST-300?

Answer: Yes, the ST-300 can be used with the RM-S rack mount kit. When rack mounting the transmitter, mount it away from other sensitive receivers and use an HGA-1 remote mount antenna to get the best performance.

Question: Can I use both audio inputs on the ST-300?

Answer: Yes, both audio inputs can be used at the same time. Use the input controls and the LCD display to mix the two inputs. The PST-170 also has a secondary audio input for mixing in tape play back or other previously recorded tour information.

Question: How many SR-50 or SR-400 receivers can be used in one place?

Answer: The number of receivers on one channel is unlimited. Think of the ST-300 or PST-170 as a small FM radio station, it broadcasts the signal and it doesn’t matter how many receivers are out in the broadcast area.

Question: Does this mean the ST-200, SR-100 and PST-16 products are obsolete?

Answer: Yes, these products are directly replaced by the ST-300, SR-400 and PST-170. Telex will continue to service and support all of these products in field for the full 3-year warranty period and beyond.

TELEX SR400 Documentation