Yorkville 100KW Keyboard/Floor Monitor Amplifier 100 Watts Price: $529.00

The 100KW is a wedge monitor version of our 100KB. It also delivers 100 Watts of clean power into a specially optimized 12" speaker/horn combination. The cabinet sounds much bigger than its appearance suggests due to careful engineering and optimally matched components. The custom-design 12" woofer combines seamlessly with the 1" tweeter, which is mounted on a proprietary ABS horn. The 100KW has active bass and treble controls located in the master section, as well as individual level controls on each of it's two channels allowing effective equalization. The input channels can be used simultaneously, thus taking advantage of a wide variety of input types including 1/4", XLR and RCA connectors. Reliability is assured by the use of limiter protection circuitry in the amplifiers.

100KW Features
Designed with musicians in mind, the 100KW includes a front-mounted effects loop, headphone jack and 1/4" line output connector. Not only does the 100KW perform well, it also looks great and will stand up to many years of abuse. Its elegant design includes black carpet covering, a curved, perforated metal grille, a carry handle, and a recessed control panel

Power @ min. impedance (Watts) 100
Minimum Impedance (Ohms) 4
Burst Power - 2 cycle 115 Watts
Speaker Configuration - LF (Size / Power) 12 inch / 100 Watts
Speaker Configuration - HF (Size / Power) 1 inch / 30 Watts
Input Channels 2
Channel 1 - inputs XLR, 1/4 inch TRS
Channel 1 - controls Volume
Channel 2 - inputs 2x 1/4 inch TRS, RCA
Channel 2 - controls Volume
Main Tone Controls Low, High
Input Sensitivity (mV) ch. 1 XLR=3 Phone=10, ch.2 Phone=75 RCA=150
Line Out (type / configuration) 1/4 inch / Front (Effects Send)
Line Out Sensitivity (Vrms) 1
Effects Loop / Location Yes / Front
Effects Return Sensitivity (Vrms) 1
LED Indicators Power
Limiter / Switchable Yes / No
Headphone Jack Yes
Dimensions (DWH, inches) 19x17x19
Dimensions (DWH, cm) 48x43x48
Weight (lbs / kg) 54/24


Yorkville KB200 Keyboard Amplifier 200 Watts Price: $679.00
AMPLIFICATION

Versatility, performance and portability best describe Yorkville's keyboard amplifiers. Better fidelity is needed to bring out the complex sounds that today's synthesizers and samplers can provide

Applying our knowledge and experience in pro audio designs, our engineers incorporate the features and performance of high quality P.A. systems into these amps so that they will also faithfully reproduce acoustic-electric instruments, voice, compact discs and tapes. If you're looking for the best in keyboard/mixer amplifiers, look no further than Yorkville Sound.

---

200k

200KB - Professional Value

The 200K delivers truly professional features in a 200W amp with a 15" two-way speaker system. All four input channels can be used simultaneously, taking advantage of a wide variety of input types including 1/4" phone, XLR and RCA plugs. Active Bass and Treble controls on channels one and two provide simple, effective equalization. The first three channels include Effects Sends to route signals through the rear panel Effects Loop. Also on the rear panel are Balanced XLR, and 1/4" phone line outs along with an Extension Speaker jack.

200KB

Yorkville 50KB Keyboard Amplifier 50 Watts Price: $379.00

For the professional keyboardist who needs a sub-compact amplifier, the 50KB is sure to fit the bill. Utilizing an advanced enclosure design developed during the design of the flagship 200KB amplifier, this little wonder takes advantage of all 50 Watts of power without falling short when it comes to great sound.

50KB Features

The 50KB features two input channels accepting 1/4", XLR or RCA inputs for maximum versatility. Roadworthiness is enhanced by a black carpet covering, a curved, perforated metal grille, a carry handle, and a recessed control panel.

* 2 channel operation
* Channel 1 optimized for microphones with an XLR and a 1/4" input
* Channel 2 optimized for line level and keyboard sources with 2 phone jack inputs and 2 RCA inputs
* 50W of power
* 10" woofer and a 3.75" tweeter
* Effects send and return
* Combo-style cabinet made of 7-ply poplar plywood with internal bracing
* Blue/black carpet exterior with plastic corner.

Power @ min. impedance (Watts) 50
Minimum Impedance (Ohms) 4
Burst Power - 2 cycle 70 Watts
Speaker Configuration - LF (Size / Power) 10 inch / 50 Watts
Speaker Configuration - HF (Size / Power) 3.75 inch / 75 Watts
Input Channels 2
Channel 1 - inputs XLR, 1/4 inch TRS
Channel 1 - controls Volume
Channel 2 - inputs 2x 1/4 inch TRS, RCA
Channel 2 - controls Volume
Main Tone Controls Low, High
Input Sensitivity (mV) ch. 1 XLR=3 Phone=10, ch.2 Phone=100 RCA=100
Line Out (type / configuration) 1/4 inch / Front (Effects Send)
Line Out Sensitivity (Vrms) 1
Effects Loop / Location Yes / Front
Effects Return Sensitivity (Vrms) 1
LED Indicators Power
Limiter / Switchable No
Headphone Jack Yes
Dimensions (DWH, inches) 12x15x17
Dimensions (DWH, cm) 30x38x43
Weight (lbs / kg) 32/14


Yorkville 50KW Keyboard/Powered Wedge Monitor - 2 Channels 50 Watts Price: $379.00

50KW - Keyboard Wedge - 50w, 10 inch / Tweeter

For the professional musician who needs a sub-compact instrument amplifier with a wedge format, the 50KW is sure to fit the bill. Utilizing an advanced enclosure design developed during the design of the flagship 200KB amplifier, this powered floor monitor takes advantage of all 50 Watts of power without falling short when it comes to great sound.

Features

The 50KW features two input channels accepting 1/4", XLR or RCA inputs for maximum versatility. Roadworthiness is enhanced by a black carpet covering, a curved, perforated metal grille, a carry handle, and a recessed control panel.

Yorkville Keyboard Amps Overiew
Designed for working musicians who require rugged and highly portable equipment, these compact 'plug and play' systems deliver the high fidelity needed to bring out the complex sounds of todays synthesizers while faithfully reproducing acoustic-electric instruments, voice, CDs and tapes.
These rugged, great-sounding combo amplifiers and cabinets stand up to life on the road and are equipped with active filtering circuits for effective tonal shaping with a minimum of knobs and switches. You get the sound you want quickly and easily from every Yorkville amplifier, gig after gig, night after night.

Yorkville Keyboard Amps Features
Yorkville backline amplification is built to exacting standards. Inside every amplifier we use high-grade glass epoxy circuit boards, low-noise metal film resistors, phone jacks with gold plated contacts, chassis metal which is one to two gauges thicker than the competitions and durable plywood construction. Outside you will find heavy gauge, black, perforated curved metal speaker grilles, rugged black carpet covering and convenient carry handles. Add rigorous factory testing and our unbeatable two year (even if you break it) unlimited transferable warranty* and you can be sure you've got what you need to reliably sound your best for many years to come. With such a comprehensive selection of combo amps, along with a proven track record for high quality performance and value, why look any further than Yorkville?

Low distortion at high sound pressure levels
Rock solid plywood construction with rigid internal bracing
Curved, perforated 16 gauge, black painted metal grilles
Black carpet covering, easy-glide plastic feet
Low profile, integral carry handles
Thermal bias sensing protection
XLR, RCA and 1/4" phone jacks with gold-plated contacts
Active filtering circuits for simple, yet effective tonal shaping
High-grade glass epoxy circuit boards and low noise components
Chassis metal one to two gauges thicker than the competitions
Rubber-coated control knobs with a precise action and accurate feel
Loaded with high quality, custom-design speakers
A full product line consisting of upright and wedge format cabinets
Short circuit protection (on 200KB)
Consistent box to box production using advanced quality assurance methodology & CAD/CAM technology
Two year (even if you break it) unlimited transferable warranty*

Specifications
Power @ min. impedance (Watts) 50
Minimum Impedance (Ohms) 4
Burst Power - 2 cycle 70 Watts
Speaker Configuration - LF (Size / Power) 10 inch / 50 Watts
Speaker Configuration - HF (Size / Power) 3.75 inch / 75 Watts
Input Channels 2
Channel 1 - inputs XLR, 1/4 inch TRS
Channel 1 - controls Volume
Channel 2 - inputs 2x 1/4 inch TRS, RCA
Channel 2 - controls Volume
Main Tone Controls Low, High
Input Sensitivity (mV) ch. 1 XLR=3 Phone=10, ch.2 Phone=100 RCA=100
Line Out (type / configuration) 1/4 inch / Front (Effects Send)
Line Out Sensitivity (Vrms) 1
Effects Loop / Location Yes / Front
Effects Return Sensitivity (Vrms) 1
LED Indicators Power
Limiter / Switchable No
Headphone Jack Yes
Dimensions (DWH, inches) 17 x 15 x 17
Dimensions (DWH, cm) 43 x 38 x 43
Weight (lbs / kg) 24 / 10.9

 

Traynor K1 Keyboard Amplifier Price: $599.00

The Traynor K1 keyboard amplifier offers comprehensive features and crystal clear acoustic reproduction in an ultra compact combo amplifier format. Built for maximum versatility, the 120 watt K1 can be used upright for projecting across a stage, on a typical speaker stand when used as a single speaker micro PA, or as a personal wedge monitor, tucking easily under a keyboard rig on even the most crowded stage.

The simple yet effective input section of the K1 provides one stereo input with EQ, a second full function mono channel with XLR combi-jack microphone jack and EQ, a third mono channel with 1/4-inch TRS balanced input, and an additional pair of RCA auxiliary inputs, ideal for CD or MP3 Player.

The K1 uses a single 10-inch low frequency woofer and a 4.75-inch high frequency driver in the 120-watt mono combo. A Link jack in the master section allows two K1s to be connected together, combining the full mixing functions of both units when creating a true stereo 240-watt system. Classic K Series features such as a balanced Line output, speaker-canceling headphone jack, all metal bar handles and speaker standmount adaptor are included.

The Traynor K1 Keyboard amplifier is built in North America using solid marine grade cabinet construction and an all-metal punched grill to protect the high quality speaker components. Like all amplifiers in the Series, Yorkvilles Two Year Unlimited Warranty covers the Traynor K1*.

*Warranty valid in Canada and USA only.

Features

• Ultra compact 120-watt wedge format keyboard amplifier

• Full Mixer Features on Input

• Stereo Link Function

• Integrated Standmount Adaptor

• Rubber feet on bottom and sides for convenient, compact storage

• Full punched metal grille

• Headphone and 1/4" Balanced Post-EQ, Pre-Master Line Outs

• Solid plywood cabinet construction, not MDF or particle board

Keyboard Amps Series Overview

Designed for working musicians who require rugged, reliable and highly portable equipment, these compact "plug and play" systems deliver the high fidelity needed to bring out the complex sounds of todays synthesizers while faithfully reproducing acoustic-electric instruments, voice, CDs and tapes.

Built in true Traynor fashion, these great sounding combo amplifiers stand up to life on the road and are equipped with active filtering circuits for effective tonal shaping with a minimum of knobs and switches. You get the sound you want quickly and easily from every Traynor amplifier, gig after gig, night after night.

Keyboard Amps Series Characteristics

Traynor backline amplification is designed and built using unparalleled levels of durability and quality found only from the name legendary for its reliability and toughness. Inside every amplifier we use high-grade glass epoxy circuit boards, low-noise metal film resistors, phone jacks with gold plated contacts, chassis metal which is one to two gauges thicker than the competitions and durable plywood construction.

Outside you will find curved, heavy gauge, perforated metal speaker grilles, rugged black leatherette covering and convenient carry handles. Add rigorous factory testing and our unbeatable two year (even if you break it) unlimited transferable warranty* and you can be sure you''ve got what you need to reliably sound your best for many years to come.

• Low distortion at high sound pressure levels

• Rock solid plywood construction with rigid internal bracing

• Curved, perforated 16 gauge, black painted metal grilles

• Black leatherette covering and non-slip rubber feet

• Low profile, integral bar handles

• Thermal bias sensing protection

• XLR, RCA and 1/4" phone jacks with gold-plated contacts

• Active filtering circuits for simple, yet effective tonal shaping

• High-grade glass epoxy circuit boards and low noise components

• Chassis metal one to two gauges thicker than the competitions

• Loaded with high quality, custom-design speakers

• Consistent box to box production using advanced quality assurance methodology & CAD/CAM technology

• Two year (even if you break it) unlimited transferable warranty*

Specifications

Specifications Cabinet Program Power (Watts)120 Watts
Cabinet Impedance (Ohms)4
Power @ min. impedance (Watts)150
Speaker Configuration - LF (Size / Power)10-inch/150 Watts
Speaker Configuration - HF (Size / Power)2.5/50-watt
Frequency Response (Hz +/-3dB)20 - 20k
Inputs4 (incl. Stereo Aux)
Channel 1 - inputsStereo, 2 X 1/4-inch inputs
Channel 1 - controlsGain, 2 Band Eq, Pan control
Channel 2 - inputsMono 1/4-inch input
Channel 2 - controlsGain, 2 Band EQ.
Channel 3 - inputsMono 1/4-inch input
Master Volume ControlYes
Input Sensitivity (mV)250 (1Vrms on Aux)
Line Out (type / configuration)Mono Balanced + Gnd Lift Sw./1/4-inch jack
Line Out Sensitivity (Vrms)1
LED IndicatorsPower
Other FeaturesLINK: 2 jacks (link-out and link-in) used with two K1''s only. Stereo RCA Aux Input Stand Adapter Built-in, Tilt/Upright Cabinet Design Bi-Amped
Dimensions (DWH, inches)14 x 18 x 16
Dimensions (DWH, cm)35 x 46 x 40
Weight (lbs / kg)30 / 14
*Specifications subject to change without notice

Traynor K2 Keyboard Amplifier Price: $799.00

The all-new ultra-compact 200-watt Traynor K2 is the newest addition to the popular Keyboard amplifier line. Designed to outperform anything in its class, the K2 is the smallest keyboard amplifier to offer Traynors innovative tube / solid-state input and proprietary Voicing circuitry first introduced on its big brother, the K4. This unique input design makes the Traynor K2 more than a monitor, but part of the keyboard players tone pallet.
The Voicing circuit offers several pre-set user selectable tone shapes on channel one to add overall presence to further enhance specific synth sounds on the K2s first channel. The selectable tube or solid state input allows the player to select at pristine, high-headroom solid-state clean input on channel one, or a more warmer, slightly compressed tube circuit to add warmth to digital synths and samplers.

Channel two includes an XLR / 1/4-inch TRS combi-jack input, for an additional line or microphone level input, and has its own dedicated three-band EQ. The Traynor K2 includes a three-band master EQ for additional overall tone shaping, as well as a master volume control and 1/4-inch TRS balanced line output.

The compact K2 is also a convenient and powerful wedge monitor, designed for the live stage. Although its small enough to fit easily under almost any keyboard rig, the 3-way speaker system delivers a full 200-watts to the stage, more than enough for most live applications. The innovative third channel post master input (located on the back of the K2) allows an additional signal to be fed to the amplifier, without feeding it to the pre-master line output. This allows sources like monitor feeds from the front of house mix, a drum machine click tracks or cue sends to be amplified on stage by the K2, without feeding them to the house mix.

Specifications
Cabinet Program Power (Watts) 200
Speaker Configuration - LF (Size / Power) 10-inch/170-watts
Speaker Configuration - HF (Size / Power) 4-inch/30-watts / 2.5-inch/20-watts
Frequency Response (Hz +/-3dB) 20 - 20k
Input Channels 3
Channel 1 - inputs 2 x 1/4-inch
Channel 1 - controls Gain, 3 band EQ, 5 position voicing
Channel 1 - switches Tube/Solid State input select
Channel 2 - inputs Combi-jack 1/4-inch/XLR, dual RCA
Channel 2 - controls Gain, 3 band EQ
Channel 3 - inputs 1 x 1/4-inch
Channel 3 - controls Gain
Master Volume Control Yes
Input Sensitivity (mV) 250 mV
Line Out (type / configuration) 1/4-inch TRS (Post EQ, Pre Master)
Line Out Sensitivity (Vrms) 1Vrms
LED Indicators Power, Clip, Master Clip
Protection Thermal
Headphone Jack Yes (Front)
Dimensions (DWH, inches) 14 x 19 x 16
Dimensions (DWH, cm) 35.5 x 48 x 40.6
Weight (lbs / kg) 39 / 17.7

Traynor K4 Keyboard Amplifier Price: $1,099.00

The North American built Traynor K4 is an advanced, extremely versatile stereo keyboard amplifier capable of delivering an extremely wide and varied tone pallet. The flagship keyboard amplifier in the line, the K4 uses three separate integrated amplifiers to deliver true stereo separation of the mid and high frequencies with the added bottom end of a mono-summed 200-watt 12-inch woofer. This variation of the 2.1 speaker configuration allows a stereo image to be felt on stage, inspiring the player with full stereo feel from a single 300 watt combo amplifier.

A single 200 watt 12-inch woofer delivers solid low end while a pair of 50 watt amplifiers drive pairs of 4.5-inch midrange drivers and 2.5-inch compression drivers that deliver high and mid frequency program.

Designed to be one of the most versatile amplifiers in the line Traynor line, K4 offers a choice of tube or solid-state signal path, selectable from a singe switch on the front panel. The tube circuit uses a pair of 12AX7A tubes capable of delivering warmth and to smoothness to the often-sterile sound of modern digital keyboards. When used with a small amount of drive, the tube section can create natural tube compression and recreate the subtle dynamics that can't be properly emulated by most of today's digital workstations

A solid-state signal path can be selected; bypassing the tube circuitry altogether for those times when the cleanest signal path possible is preferred. The K4's channel one input also features a foot switchable Tube Overdrive control allowing the player to dial in any amount of tube, from subtle warm grit to a full on overdrive.

Versatile inputs allow two stereo sources to be connected to Channel One, while an additional stereo source or a microphone can be connected to Channel Two. Channel Three can handle an additional stereo keyboard or any other source including MP3 player or laptop where additional EQ control isn't required. Channels One and Two have separate 3-band EQs for tone shaping, while Channel One offers an additional 5-position voicing circuit.

A fourth post DI out stereo input channel with its own gain control can be found on the rear panel of the K4. This versatile fourth channel allows an external click track, drum monitor mix or monitor feed from the FOH or monitor console to be played through the K4 without sending that signal back through the DI outputs. This allows the K4 to act as its own powered monitor, without everything you hear on stage being part of the audience's mix.

Built for the rigors of the road, the Traynor K4 is manufactured using a solid, void-free plywood cabinet construction and an all-metal grille to protect the high quality speaker components.

Roland KC350 Keyboard Amplifier 120 Watt Price: $499.99 The perfect combination of power and value, the new KC-350 is ideal for medium-sized gigs. It features a 120-watt amplifier with convenient 3-band EQ, new Output Select and Shape switch features, plus a Subwoofer output for extra low end. The KC-350 can also be connected to mixing consoles via its line output. 4-channel mixing keyboard amplifier with 120-watt/12 speaker and horn tweeter Output Select feature and convenient Shape switch for tonal adjustment 3-band EQ and Subwoofer output compatible with new KCW-1 1/4 phone output for connection to recording devices Stereo Link In/Out for chaining to KC-350s for stereo applications Up to 4-Channel Mixing KC-series amplifiers feature a flexible mixing section designed with the performing musician in mind. Our flagship models feature up to four stereo inputs, and KC amps include a Microphone input and stereo Auxiliary input for connecting CD players. Stereo Link Capabilities The KC-550 and KC-350 include Rolands Stereo Link feature for chaining two amplifiers. Using a single cable, you can connect two KC amps for true stereo sound while controlling them both from the amp nearest you on stage. Subwoofer-Ready Want more low end? Simply add an optional subwoofer like Rolands new KCW-1. Connections are easy, thanks to the Subwoofer output found on all new KC amps. Now even the most affordable models can sound huge! Made for the Road KC amps are built for life on the road. All models have built-in handles for easier transportation (the KC-550 also includes casters) and a rugged design with heavy-duty carpeting, protective edges and an all-metal grille. Yorkville 100KB Keyboard Amplifier 100 Watts Price: $579.00 100KB Overview The 100KB combo amplifier delivers 100 Watts of clean power into a specially optimized 12" speaker/horn combination. The cabinet sounds much bigger than its appearance suggests due to the careful engineering and optimally matched components. Superior imaging has been achieved by transparently combining the custom design woofer with the 1" tweeter, which is mounted on a proprietary ABS horn. The 100KBhas active bass and treble controls located in the master section, as well as individual level controls on each of its three channels, allowing effective equalization. The three input channels can be used simultaneously, thus taking advantage of a wide variety of input types including 1/4", XLR and RCA connectors. Reliability is assured by the use of limiter protection circuitry in the amplifiers. 100KB Features Designed with musicians in mind, the 100KB includes an internal spring reverb with master reverb control, a front-mounted effects loop, headphone jack and 1/4" line output connector. Not only does the 100KBperform well, it also looks great and will stand up to many years of abuse. Its elegant design includes black carpet covering, a curved, perforated metal grille, a carry handle, and a recessed control panel. 100KB Specifications Roland KC150 Keyboard Amp 65 Watt Price: $449.99 KC-150: Stereo Mixing Keyboard Amplifier Overview The KC-150 is a compact 60-watt amp with 4-channel capability including Auxiliary and Microphone inputs. The KC-150 can also be expanded with an optional subwoofer for a powerful low-end boost. Features Affordable 4-channel keyboard amplifier with 60-watt/12" speaker and piezo tweeter Includes stereo Auxiliary input (RCA) and XLR Microphone input 2-band EQ and Subwoofer output compatible with new KCW-1 Headphones output; can be mounted on speaker stands Roland KC60 Keyboard Amp Price: $349.99 The KC-60 3-Channel Mixing Keyboard Amplifier brings renowned KC-Series sound quality to an even lower price. This affordable 40-watt amp is also the first to feature a Subwoofer output for enhanced low end. And with three separate channels—including an XLR Microphone input and stereo Auxiliary input—the KC60 is one of the most flexible amps around. Roland KC60 Features: Compact, affordable keyboard amplifier with legendary KC sound 40-watt output power with 10" speaker and independent tweeter Subwoofer output for low-end boost (compatible with most subwoofers) 3-channel design includes 1/4" Line input and XLR Microphone input Stereo auxiliary input (RCA type) for connecting CD or MD players Rotary controls for adjusting channel and headphone levels, plus Low and High EQ Big Sound That's Easy on Your Wallet Roland's KC-Series Keyboard Amplifiers are known for their exceptional sound quality. That's because they're built to handle the wide range of sounds created by today's synthesizers, samplers and electronic musical instruments. The new KC60 takes these principles and puts them in a more affordable design, powered by a 40-watt amplifier with a 10-inch speaker and separate tweeter. Now anyone can step up to a KC amp. And once you do, you'll never look back. Flexible 3-Channel Design with Subwoofer Output While the KC-60 is built primarily for keyboards, it's also at home with a microphone and CD player. Specifically, there are three input channels including an XLR Mic input and Auxiliary input—each with its own adjustable volume. And while 40 watts of power sounds good, you can also add an optional subwoofer from any manufacturer via the KC-60's Subwoofer output—a first of its kind on a keyboard amp!   145721 Hartke Peavey Roland Traynor Yorkville Keyboard Amplifiers 145721 Narrow By: Category: Price: Brand: Our personalized service will help you select the keyboard amplifier that is right for you. We offer competitive value pricing, many ways to pay, free shipping on most items and financing at low rates. Peavey KB3 Keyboard Amp Price: $299.99 Whether you need clean, pro-quality compact amp for your rehearsal room or a full-featured powerhouse that doubles as a portable PA, Peavey's got you covered. The KB1 is a great practice amp with 2 separate channels, a headphone output and 2-band EQ. The KB2 adds another channel, mic input, FX loop, monitor input and XLR output. Step up to the KB3 (50 watts, 10 in. speaker) for the added frequency range of a tweeter, and an extension speaker output. The KB4 is a full-featured compact PA system, complete with stereo mixing, 3-band EQ, built-in casters and a telescoping handle. The big KB5 has the most power in the series and adds a horn to the impressive speaker configuration. KB Series Designed as a PA system in a keyboard amp, the incredibly versatile new KB Series amplifiers feature independent channels that can easily handle vocal microphones, acoustic and electric guitars, drum machines and backing machines such as CD and DAT players. Each channel also has its own EQ for tweaking instruments and audio sources independently. From the 20-watt KB1 to the 200-watt KB5, you'll love the clean, full sound of pure Peavey power. Dynamic, new angled baffle boards enhance the KB Series' coverage area by angling the speakers up toward the user and audience. Whether you need a small, home keyboard amp or a high-output concert model, Peavey's KB Series is as versatile as your playing. The Peavey KB3 keyboard amp is a 3-channel, self-contained, compact sound system. The KB3 has a 12" speaker and a tweeter. It is a very good choice for voice, keyboards, acoustic and electric guitar, drum machines and backing machines. Features: 50 Watts of clean Peavey power Extension cab capability extends power rating out to 70 Watts 3 separate channels Channel 1 had mic input 2-band EQ per channel Channel 4 monitor input Headphone out with level control 12 inch speaker with tweeter FX send/return Balanced XLR main out Peavey KB2 Keyboard Amp Price: $279.99 Peavey KB2 Keyboard Amplifier The KB2 keyboard amplifier provides 3 input channels, one with microphone input, 40 watts of power and a 10 inch coaxial speaker. It also features 2-band EQ, an FX loop, monitor input, a headphone jack and XLR output. The versatile KB Series keyboard amplifier features independent channels that can easily handle vocal microphones, acoustic and electric guitars, drum machines and backing machines such as CD and DAT players. The new angled baffle boards in KB2 enhance the coverage area by angling the speakers up toward the user and audience. Whether you need clean, pro-quality compact amp for your rehearsal room or a full-featured powerhouse that doubles as a portable PA, Peavey's got you covered. 40/10 Watts of clean Peavey power 3 separate channels Channel 1 has mic input 2-band EQ per channel Channel 4 monitor input Headphone out 10 inch coax speaker FX send/return Balanced XLR main out Dimensions Weight: 37 lbs. Width: 17 in. Depth: 12.5 in. Height: 17.75 in. Peavey KB1 Keyboard Amp Price: $139.99 Peavey KB1 Keyboard Amplifier A great 20-watt practice amp, the KB1 keyboard amplifier features 2 separate channels, an 8 inch speaker, a headphone output and 2-band EQ. Designed as a PA system in a keyboard amp, the incredibly versatile KB1 amplifier features independent channels that can easily handle vocal microphones, acoustic and electric guitars, drum machines and backing machines such as CD and DAT players. The dynamic angled baffle boards enhances the KB1's coverage area by angling the speakers up toward the user and audience. Whether you need clean, pro-quality compact amp for your rehearsal room or a full-featured powerhouse that doubles as a portable PA, Peavey's got you covered. 20 Watts of clean Peavey power 8 inch extended range speaker Two separate channels 2-band EQ per channel Headphone out Dimensions Weight: 18.60 lbs. Width: 13.8750 in. Depth: 9 in. Height: 14.6250 in. Roland KC550 Keyboard Amplifier 180 Watt Price: $649.99 KC-550: Stereo Mixing Keyboard Amplifier Overview: The KC-550 boasts 180 watts of powerful sound via a 15-inch speaker and horn tweeter. In addition to its four input channels, this flagship amp includes an Output Select switch for selecting the monitor sound destination, a Shape switch for quick sound adjustment and an XLR Line output for direct connection to a mixing console.Features Flagship keyboard amplifier with powerful 180-watt/15" speaker and horn tweeter Output Select feature and convenient Shape switch for tonal adjustment 3-band EQ and Subwoofer output compatible with new KCW-1 XLR Line output for connection to mixing consoles Stereo Link In/Out for chaining to KC-550s for stereo applications   KC-60 KC-150 KC-350 KC-550 Watts 40 65 120 180 Speakers 10" woofer, tweeter 12" woofer, tweeter 12" woofer, horn driver 15" woofer, horn driver CONFIGURATION Channels 3 Mono + Stereo Aux In 4 Mono + Stereo Aux In 4 Stereo + Stereo Aux In 4 Stereo + Stereo Aux In Inputs XLR, 1/4" x 3 XLR, 1/4" x 4 XLR, 1/4" x 8 XLR, 1/4" x 8 Mic Input XLR (Ch. 1) XLR (Ch. 1) XLR (Ch. 1) XLR (Ch. 1) Monitor --- Ch. 4 - Dedicated Output Select Output Select EQ Low, High Low, High Low, Mid, High, Shape Switch Low, Mid, High, Shape Switch Effects --- --- --- --- Stereo Link No No Yes Yes Sub Woofer Out Yes Yes Yes Yes Outputs 1/4" Mono 1/4" Balanced TRS 1/4" Balanced TRS 1/4" L/R (unbalanced), XLR L/R Headphone Jack Yes Yes Yes Yes Stand Mountable Yes Yes Yes --- Wedge Shape Yes Yes Yes Yes Casters --- --- --- 4 Weight 28 lbs. 32 lbs. 38 lbs. 69 lbs.   KC-60 KC-150 KC-350 KC-550   KC-60 KC-150 KC-350 KC-550 Watts 40 65 120 180 Speakers 10" woofer, tweeter 12" woofer, tweeter 12" woofer, horn driver 15" woofer, horn driver CONFIGURATION Channels 3 Mono + Stereo Aux In 4 Mono + Stereo Aux In 4 Stereo + Stereo Aux In 4 Stereo + Stereo Aux In Inputs XLR, 1/4" x 3 XLR, 1/4" x 4 XLR, 1/4" x 8 XLR, 1/4" x 8 Mic Input XLR (Ch. 1) XLR (Ch. 1) XLR (Ch. 1) XLR (Ch. 1) Monitor --- Ch. 4 - Dedicated Output Select Output Select EQ Low, High Low, High Low, Mid, High, Shape Switch Low, Mid, High, Shape Switch Effects --- --- --- --- Stereo Link No No Yes Yes Sub Woofer Out Yes Yes Yes Yes Outputs 1/4" Mono 1/4" Balanced TRS 1/4" Balanced TRS 1/4" L/R (unbalanced), XLR L/R Headphone Jack Yes Yes Yes Yes Stand Mountable Yes Yes Yes --- Wedge Shape Yes Yes Yes Yes Casters --- --- --- 4 Weight 28 lbs. 32 lbs. 38 lbs. 69 lbs.   KC-60 KC-150 KC-350 KC-550   KC-60 KC-150 KC-350 KC-550 Watts 40 65 120 180 Speakers 10" woofer, tweeter 12" woofer, tweeter 12" woofer, horn driver 15" woofer, horn driver CONFIGURATION Channels 3 Mono + Stereo Aux In 4 Mono + Stereo Aux In 4 Stereo + Stereo Aux In 4 Stereo + Stereo Aux In Inputs XLR, 1/4" x 3 XLR, 1/4" x 4 XLR, 1/4" x 8 XLR, 1/4" x 8 Mic Input XLR (Ch. 1) XLR (Ch. 1) XLR (Ch. 1) XLR (Ch. 1) Monitor --- Ch. 4 - Dedicated Output Select Output Select EQ Low, High Low, High Low, Mid, High, Shape Switch Low, Mid, High, Shape Switch Effects --- --- --- --- Stereo Link No No Yes Yes Sub Woofer Out Yes Yes Yes Yes Outputs 1/4" Mono 1/4" Balanced TRS 1/4" Balanced TRS 1/4" L/R (unbalanced), XLR L/R Headphone Jack Yes Yes Yes Yes Stand Mountable Yes Yes Yes --- Wedge Shape Yes Yes Yes Yes Casters --- --- --- 4 Weight 28 lbs. 32 lbs. 38 lbs. 69 lbs.   KC-60 KC-150 KC-350 KC-550 Power @ min. impedance (Watts) 100 Minimum Impedance (Ohms) 4 Burst Power - 2 cycle 115 Watts Speaker Configuration - LF (Size / Power) 12 inch / 100 Watts Speaker Configuration - HF (Size / Power) 1 inch / 30 Watts Input Channels 3 Channel 1 - inputs XLR, 1/4 inch TRS Channel 1 - controls Volume Channel 1 - switches Piano Contour Channel 2 - inputs 1/4 inch TRS, RCA Channel 2 - controls Volume Channel 2 - switches Reverb Defeat Channel 3 - inputs 1/4 inch TRS Channel 3 - controls Volume Master Volume Control Yes Main Tone Controls Low, High Input Sensitivity (mV) ch. 1 XLR=3 Phone= 20, ch. 2 Phone=75 RCA=150, ch. 3 Phone=75 Line Out (type / configuration) 1/4 inch / Front (Effects Send) Line Out Sensitivity (Vrms) 1 Effects Volume Yes Effects Loop / Location Yes / Front Effects Return Sensitivity (Vrms) 1 Internal Reverb / Effects Spring Reverb LED Indicators Power Limiter / Switchable Yes / No External speaker output / location No Headphone Jack Yes Dimensions (DWH, inches) 14x17x19 Dimensions (DWH, cm) 35x43x48 Weight (lbs / kg) 49/22

Type	Keyboard Amplifer
Cabinet Program Power (Watts)	300
Speaker Configuration - LF (Size / Power)	12-inch/200-watts
Speaker Configuration - HF (Size / Power)	2x4.5-inch/50-watts / 2x2.5-inch/50-watts
Frequency Response (Hz +/-3dB)	20 - 20k
Inputs	4
Channel 1 - inputs	2 Stereo pairs of 1/4-inch TRS
Channel 1 - controls	Gain, 3 band EQ, 5 position voicing, Lead/OD Trim
Channel 1 - switches	Lead/Overdrive, Tube/Solid State input select
Channel 2 - inputs	Stereo pair 1/4-inch TRS, mono XLR
Channel 2 - controls	Gain, 3 band EQ
Channel 3 - inputs	Stereo pair of 1/4-inch TRS, stereo RCA
Channel 3 - controls	Gain
Channel 4 - inputs	Stereo pair of balanced 1/4-inch TRS
Channel 4 - controls	Gain
Master Volume Control	Yes
Input Sensitivity (mV)	Ch.1/2 - 500mV / Ch. 3 - 250mV
Line Out (type / configuration)	Stereo XLR (Post EQ, Pre Master), Ground Lift
Line Out Sensitivity (Vrms)	1Vrms
LED Indicators	Power, Clip Lead/OD
Protection	Thermal
Headphone Jack	Yes (Rear)
Other Features	Unfilitered mono-summed Subwoofer 1/4-inch output
Dimensions (DWH, inches)	15.5 / 23.3 / 19.6
Dimensions (DWH, cm)	39.4 / 59 / 50
Weight (lbs / kg)	57.3 / 26
*	Specifications subject to change without notice

Roland KC-350 Keyboard Amplifier Price: $549.00