Live Sound|Speaker Cabinets|Powered Speaker Cabinets|JBL| JBL EON510 Portable Powered Speaker
with FREE STAND and CABLE !!
 EON510KIT
|
® |
All items can be upgraded for the difference in price (in most cases). Just tell us what you want in the Shopping Cart 'Notes' section.
JBL EON510 Details top
EON 510
Portable Self-Powered 10",
Two-Way, Bass-Reflex Design
The EON510 is a 10-inch, two-way, powered, portable speaker system. Capable of reproducing full bandwidth sound at high levels it offers the additional utility of a 3 channel built-in mixer. The EON510 is comprised of a 254 mm (10 in) Differential Drive® woofer, a 25.4 mm (1 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide. Both components are driven by the discrete channels of a 280 watt Class-D integrated power amplifier. The input section contains all cross-over functions, protection, and mixer functionality.
The mixer offers XLR or ¼-inch TRS phone
jack compatibility. Selectable input sensitivities
allow a broad range of devices to be properly
matched. A unique mix/loop signal flow router
provides opportunities for daisy chaining or
gigging with the built-in mixer only. Preengineered
system EQs allow for matching the
settings to the actual source material. In the
“cut” position maximum level can be achieved
for speech reproduction by reducing need to
reinforce the lower frequencies. This is also a
typical setting when using the system as a floor
monitor, reducing low frequency build-up which
occurs naturally when placed on a floor. The
“flat” setting is ideal for live music and the
“boost” for reproducing low level pre-recorded
music, delivering extra low and high frequency
energy. The signal present and limit lights
indicate performance status. An additional
switch is provided to defeat the illuminated logo
in theatre applications.
In addition to acoustic performance the EON510 features a top handle grip with non-slip
rubber over-molding, ultra light weight, and balanced ergonomics. The new generation of EON
products offers true portability and ease of handling. Four standard M10 rigging points and
integrated pole mount socket increase the system’s utility. The extremely rugged copolymer
enclosure has been designed for main and 45° monitor orientation in the left and right hand
configuration. A full screen-backed steel grille offers additional protection for both the woofer and
compression driver components.
JBL EON510 Specs top
System Type: Self powered 10", two-way, bass-reflex design
Frequency Range (-10 dB): 58 Hz - 18.5 kHz (EQ in ‘Flat’ position)
Frequency Response (±3 dB): 70 Hz - 17 kHz (EQ in ‘Flat’ position)
Coverage Pattern: 100° H x 60° V nominal
Directivity Index (DI): 9 dB
Directivity Factor (Q): 8
Crossover Frequency: 1.8 kHz
System Power Rating: 280 W continuous, 560 W peak
LF Power amp: 220 W continuous at driver impedance
HF Power amp: 60 W continuous at driver impedance
Distortion: Less than 0.1% at rated power
Maximum SPL: 121 dB
Signal indicators: Limit: Red LED indicates input overload condition
Signal: Green LED indicates signal present
Mic/Line: Red LED indicator
Input Gain (input 3): Mic position: -Infinity to +40 dB
Line position: -Infinity to +4 dB (+20 dBu Max signal input)
Input Gain (input 1 & 2): -Infinity to +4 dB (+20 dBu Max signal input)
Input Impedance: 64 K Ohms (balanced), 32 K Ohms (unbalanced)
Boost EQ: LF +3 dB Shelving Filter @ 150 Hz
HF +2.5 dB Shelving Filter @ 4 kHz
Low Cut Filter: Preset high pass @ 120 Hz
LF Driver: 1 x JBL 261F 254 mm (10 in) Differential Drive® integrated woofer
with dual 1.5” voice coils.
HF Driver: 1 x JBL 2414H-1 25.4 mm (1 in) neodymium compression driver
Input 3 connector: Balanced XLR / ¼ inch TRS combo jack with XLR loop through,
Input 1 & 2 connector: ¼ inch TRS jack
Output (Loop/Mix switch): Balanced male XLR, +20 dBu (peak) o/p level in MIX position
XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
Limiting/Protection: Dynamic Limiter
Enclosure: PP impact copolymer, multi-purpose main & monitor orientation.
Handles: One on top with rubber grip
Suspension / Mounting: 36 mm pole socket with stabilizing screw, 3 x M10 suspension
points, 1 x M10 pull-back point
Grille: Powder coated perforated steel with acoustically transparent
black screen backing.
AC input: 120 – 240 V, 50/60 Hz
Dimensions (H x W x D): 490 mm x 313 mm x 262 mm (19.3 in x 12.3 in x 10.3 in)
Net Weight: 7.7 kg (17 lb)
Warranty Information: JBL Tech Support 800.852.5776 (Lifetime
limited warranty) JBL Website
PLEASE NOTE:
We cannot ship JBL products outside the U.S. and its territories.
1-877-JOE-MEEK(USA) Joe Meek Website
Other views of JBL EON510 (Click to enlarge):
| |
Sale Price: $599.00 MSRP: $749.00 You Save: $150.00!
Notify me of any price drops on this product Send us your email address to be notified when the price drops on item #EON510KIT
No Sales Tax Outside Florida!! Not sure about the price?
Free Shipping on this overweight and/or oversized item! Order Toll Free 1-877-778-7845 Mention Item # EON510KIT
|