In-Ear Monitoring Systems are better than ever and allow today's presenters and performers the ability to hear better and perform better.At Musiciansbuy.com, we sell a wide variety of in-ear monitoring systems and accessories, ranging from earphone sleeves, body pack receivers, and wireless transmitters to complete personal monitoring systems. Our friendly and knowledgeable sales professionals will assist you in selecting the right monitoring system and help ensure that it is compatible with your other equipment. We offer some of the best systems on the market by brands like Aviom, Shure, Audio Technica, Behringer, Telex and others.Musiciansbuy.com offers competitive value pricing and free shipping on most of the products we sell. Call one of our sales professionals today and let us help you take your next performance or presentation to the next level.

Audio-Technica M2RL Receiver for M2 Systems Price: $349.00

The M2 Wireless In-Ear Monitor System is designed to make professional in-ear monitoring features accessible for performers who want to be free from the problems associated with floor wedges. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. The wireless UHF M2T Stereo Transmitter provides a choice of 100 selectable frequencies and is equipped with two XLR/ combo input connectors into which users can connect line-level inputs. While up to 10 complete M2 systems may be used on stage simultaneously, any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.

  • High-fidelity sound with clean, articulate mix allows you to hear yourself better at lower volume
  • 100 selectable UHF channels
  • Up to 10 simultaneous systems per frequency band
  • Three receiver modes: Personal Mix, stereo, and mono
  • Personal Mix Control allows volume and mix control of two independent signals at the receiver
  • 3.5 mm line-in jack connects to ambient microphone, click track & more
  • LED indicators provide easy-to-read level monitoring
  • XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
  • Adjustable squelch eliminates annoying static
  • Pilot tone protects against RF interference when the transmitter is turned off
  • Limiter (defeatable) helps protect your hearing from sudden peaks
  • Portable system is quick to load and set up
  • Reduces on-stage audio clutter for better overall mix & less feedback
  • Use any number of M2R Stereo Receivers (with Personal Mix Control) on the same frequency
  • Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
  • Personal fit with 3 sizes of rubber eartips plus ear-conforming foam tips
  • Auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input.



Behringer Powerplay 16 P16-D 16-Channel Digital Distributor Price: $99.99

POWERPLAY 16 P16-D

16-Channel Digital ULTRANET Distributor

  • Distribution Hub for P16-I for system expansion
  • 1 ULTRANET input feeds 8 ULTRANET outputs (RJ-45)
  • Provides bus-power and 16-channel signal transmission for all 8 outputs
  • Up to six P16-D ULTRANET Distributors can be combined for a total of forty-eight P16-M Personal Mixers
  • Status LED indicators for RJ-45 input and 8 RJ-45 outputs
  • Internal autorange power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
  • Extremely rugged construction ensures long life even under the most demanding conditions
  • Conceived and designed by BEHRINGER Germany

The BEHRINGER POWERPLAY P16 system is the easy, affordable way to give your musicians and vocalists what they really wantmore me! P16-M Personal Mixers lets each performer take control of what they hear, allowing the engineer to concentrate on providing the audience with the best possible listening experience. Fast and easy to set up, a basic system can be installed and configured in a matter of minutesand the system can be expanded to adapt to changing needs.

Tech-Free Zone

The P16-Ms simple user interface makes it easy for even non-techies to dial-in the perfect monitor mix. For example, lets say the electric guitar is too loud in the lead vocalists mix; they simply press the appropriate channel button (the one labeled E. GTR) and turn the Volume control to lower the guitar level in their mix. They can also adjust Pan (left to right mix), EQ (Bass, Mid with sweepable Freq control and Treble), and much more. All of these adjustments can be made without affecting anyone elses personal mix.

Easy Installation

A basic installation consists of one P16-I Input Module, which connects to the main mixing console, and up to six P16-M Personal Mixers, creating a system big enough to equip a typical recording studio, a small to medium-sized band, or a worship team. Youll also need a few standard audio and CAT5 cables. The optional P16- MB mounting bracket allows the P16-M Digital Personal Mixer to be attached to any standard microphone, music or drum stand. The system can easily be expanded via the P16-D Digital ULTRANET Distributor, six of which can be combined to drive up to forty-eight P16-M Personal Mixers.

Extraordinary Value

The POWERPLAY P16 puts total control of the monitor system where it belongsin the hands of the performers, freeing up the engineer to sculpt the perfect front-of-house mix. The POWERPLAY P16 system is the easy, affordable way to tame runaway stage volume and give your musicians and vocalists what they really wantmore me!


Behringer Powerplay 16-Channel Digital Personal Mixer Price: $249.00

The BEHRINGER POWERPLAY P16 system is the easy, affordable way to give your musicians and vocalists what they really wantmore me! P16-M Personal Mixers lets each performer take control of what they hear, allowing the engineer to concentrate on providing the audience with the best possible listening experience. Fast and easy to set up, a basic system can be installed and configured in a matter of minutesand the system can be expanded to adapt to changing needs.

Tech-Free Zone

The P16-Ms simple user interface makes it easy for even non-techies to dial-in the perfect monitor mix. For example, lets say the electric guitar is too loud in the lead vocalists mix; they simply press the appropriate channel button (the one labeled E. GTR) and turn the Volume control to lower the guitar level in their mix. They can also adjust Pan (left to right mix), EQ (Bass, Mid with sweepable Freq control and Treble), and much more. All of these adjustments can be made without affecting anyone elses personal mix.

Easy Installation

A basic installation consists of one P16-I Input Module, which connects to the main mixing console, and up to six P16-M Personal Mixers, creating a system big enough to equip a typical recording studio, a small to medium-sized band, or a worship team. Youll also need a few standard audio and CAT5 cables. The optional P16- MB mounting bracket allows the P16-M Digital Personal Mixer to be attached to any standard microphone, music or drum stand. The system can easily be expanded via the P16-D Digital ULTRANET Distributor, six of which can be combined to drive up to forty-eight P16-M Personal Mixers.

You Are Covered

We always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world.

As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous 3-Year Warranty program.

**Warranty details can be found at music-group.com.




Behringer Powerplay 16 P16-I 16-Channel 19'' Input Module Price: $199.99

POWERPLAY 16 P16-I

16-Channel 19'' Input Module with Analog and ADAT Optical Inputs

  • Converts 16 analog inputs into 24-bit digital audio to be transmitted via standard CAT5e cable
  • 2 x 8-channel ADAT optical inputs with auto detect and priority select
  • 16 balanced, high-headroom TRS audio inputs
  • State-of-the-art 24-bit A/D converters for premium audio quality
  • 4-position gain switches per channel pair (-10, 0, +4, +22 dB)
  • Digital inputs support 44.1 and 48 kHz sample rates
  • Ultra-low system latency of less than 1 millisecond
  • Signal Present and Clip LEDs per channel plus ADAT status LEDs
  • Standard CAT5e connection delivers power and signals for up to 6 Personal Mixers
  • ULTRANET expansion network connector (RJ45)
  • Internal autorange power supply for maximum flexibility (100 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
  • Extremely rugged construction ensures long life even under the most demanding conditions
  • Conceived and designed by BEHRINGER Germany



Shure SE215 Sound Isolating EarPhones Clear >> Shure EarBuds Price: $99.99

Dynamic MicroDriver
Featuring Dynamic MicroDriver, the SE215 delivers detailed sound with enhanced bass. A detachable cable with formable wire enables easy replacement and a secure, comfortable fit on-stage or on-the-go. Sound Isolating sleeves in multiple sizes provide up to 37 dB of isolation and a customized fit. Available in translucent black or clear color choice.

Product Overview:

  • Detailed Sound with Enhanced Bass
  • Sound Isolating Design
  • Speaker Type: SingleDynamic MicroDriver
  • 2-Year Limited Warranty (see warranty information)
  • Included Fit Kit
  • Available in Clear or Translucent Black

Evolved from personal monitor technology that's been road-tested by pro musicians, the SE215 delivers detailed sound for personal listening or professional monitoring. Dynamic MicroDrivers deliver detailed sound with enhanced bass.

Speaker Type
Single Dynamic MicroDriver

Sensitivity (1kHz)
107 dB SPL/mW

Impedance (1kHz)
20

Noise Attenuation
Up to 37 dB

Frequency Range
22Hz 17.5kHz

Input Connector
Gold-plated 3.5 mm (1/8)

Cable
64 Detachable (at ear) with wireform fit

Color
Available in Clear or Translucent Black




Shure EASFX2 Earphone Sleeves Black Soft Flex (Lg.) (5Pair) Price: $14.99
Large Gray soft flex sleeves for E3, E4, E5, E3C, E4C, E5C, SCL3, SCL4, SCL5, SE115, SE215, SE315, SE425, and SE535 earphones (Ten Included/Five Pair)


Shure EASFX2 Earphone Sleeves Black Soft Flex (M) (5Pair) Price: $14.99

For E2c, SE102MPA, i2c, and QuietSpot versions. These reusable sleeves fit comfortably in the ear and allow for ease of insertion. Choose from three sizes (small, medium, large) for the best personal fit.

Not compatible with SE Model earphones.

EASFX2-10S - 5 pair small (Replaces EA510S)
EA510M - 5 pair
EA510L - 5 pair
EA506A - 1 pair each assorted S,M,L




Shure EASFX2 Earphone Sleeves (Sm.) Black Soft Flex (5Pair) Price: $14.99
EASFX1-10S

Small Gray soft flex sleeves for E3, E4, E5, E3C, E4C, E5C, SCL3, SCL4, SCL5, SE115, SE215, SE315, SE425, and SE535 earphones (Ten Included/Five Pair)


Aviom A-16CS Remote Control Surface for A-16R Price: $525.00

The A-16CS is a remote controller for the A-16R Personal Mixer.

Features

Control of all mix functions in the A-16R
Sixteen channel-select buttons with dual LEDs
Dedicated Recall, Group, Solo, and Mute buttons
Save and Recall of the 16 Presets in the A-16R
Pan/Spread control with LED readout
Channel volume control with LED readout
Master Volume, Treble, and Bass controls
Mounts easily on a mic stand with the optional MT-1 mic stand mount
Dual footswitch jack for selecting Presets (up/down)
A-Control jack to connect the A-16CS to the A-16R via Cat-5

The A-16CS Control Surface allows the A-16R to be mounted in a rack with power amps, wireless transmitters, effects, etc., while still allowing a performer to have complete control over mix functions and presets. The user interface is similar to that of the A-16II.

Each A-16CS can control one A-16R, connected by a single Cat-5 cable of up to 200'/ 60m. Using the A-16R and A-16CS simplifies audio connections and provides two control points for a given mix.

Specifications

A-Control Inputs:

one Category 5 (RJ45 connector)

Footswitch Input:

one TRS ¼” dual function

Size:

10.75” wide x 5.6” deep x 2.22” high

Weight:

3.4 lbs

Options:

MT-1 Mic Stand Mount
EB-1 Extension Bracket




Aviom A-16D A-Net Distributor Price: $489.00

The A-16D distributes a 16-channel Pro16 A-Net stream to up to eight additional Pro16 devices

Features

1/2 rack space, 8-output A-Net power and audio distributor with Cat-5 connectors
8 separate rear panel DC power inputs for remote power supplies, no power supply necessary at remote location
Uses same power supply as other A-Net system components
8 ports simultaneously output 16 channels of audio and DC power to remote A-Net personal mixers and devices over single Cat-5 ethernet cable
Parallel connection to remotes for cleaner, simpler system setup
Dedicated front panel DC Power Active LED indicators for each output channel
Front panel Power and A-Net Active LED's
Unlimited number of units may be used for larger system distribution needs
Power supply supports multiple voltages for international use

With one A-Net input and eight parallel A-Net outputs, the A-16D provides a low-cost way to replace daisy-chain connections with star configurations. The A-16D is also capable of distributing DC power out any of the eight A-Net Out jacks, eliminating the need to connect a power supply at each Personal Mixer. Any combination of powered and unpowered connections is possible; simply connect external power supplies to the A-16D on a per-channel basis as needed.

The A-16D is also a cost-effective way to refresh an A-Net signal for long runs in excess of 500ft/150m, to provide a redundant cable path in a digital snake or audio distribution system, and to split an A-Net signal to multiple output locations. There is no limit to the number of A-Net Distributors that can be used in a single system.

Specifications

A-Net Inputs:

one Category 5 (RJ45 connector)

A-Net Outputs:

eight Category 5 (RJ45 connector)

Remote DC Power Inputs:

eight - Rear panel; accepts power supplies from A-16II or A-16R

Main power input:

one; accepts included DC power supply

Main LED Indicators:

Power On, Yellow

Channel LED Indicators:

A-Net Active, Green

Remote DC Power Active LED:

One per A-Net output

Size:

8.5” (1/2 rack space) wide
6.7” deep x 1.2” high

Options:

Can be rack-mounted on a standard 1U rack accessory shelf
Weight: 2.0 lbs.




Aviom A-16DPRO Rack Mounted A-Net Distributor Price: $1,365.00

The A-16D Pro distributes the A-Net output from any Pro16 source, along with DC power for Personal Mixers, to up to eight devices.

Features

One A-Net input, eight powered A-Net outputs
A-Net Thru for system expansion (passive A-Net output)
Isolated DC power supplies for eight A-Net Personal Mixers via the Cat-5e cable
Standard IEC power connection
EtherCon connections throughout
Multiple A-Net Distributors can be used in a system

Each A-16D Pro accepts one Pro16 A-Net input signal and provides nine parallel outputs, using rugged EtherCon connectors and standard Cat-5e cables. The A-16D Pro provides isolated (floating ground) DC power through the eight A-Net Outs; the ninth output is an unpowered A-Net Thru connector, designed for distributing a copy of the A-Net signal to a second A-Net Distributor or remote location.

The 2U A-16D Pro eliminates the need to daisy chain Personal Mixers, and simplifies set-up by eliminating the need to connect a power supply to each mixer. Inside the A-16D Pro is Aviom's unique power sub-system design, which requires no external power supplies and which virtually eliminates the possibility of introducing hum or ground loops. The A-16D Pro can also be used as a central hub in an audio distribution system or snake, providing outputs to multiple locations or redundant outputs to a single location.

All connections on the A-16D Pro are on the front panel. A pass-through cable cutout is provided for flexible cable routing. As with all Pro16 Series products, Cat-5e cable runs can be up to 500ft/150m.

Specifications

A-Net Input:
One EtherCon RJ45 connector

A-Net Thru:

One EtherCon RJ45 connector, unpowered

A-Net Outputs:

8 EtherCon RJ45 connectors, powered (DC)

LEDs:

Power On; A-Net Active

Pro16 A-Net:

16 channels of digital audio over Cat-5e cable
uses unshielded Cat-5e UTP (or better) cable

Power Supply:

Internal, universal switching type

Input Voltage:

100-240VAC, 50-60Hz, 60W
Output Voltage for

Personal Mixers:
18-24 VDC, 0.5 amp
transmitted over the Cat-5e cable

Dimensions:
19" (482.6 mm) wide x 14.25" (362 mm) deep; 2U,
3.5" (88.9 mm) high

Weight:
12.0 lbs (5.44 kilo)




Aviom A-16R Rack Mounter Personal Mixer Price: $1,055.00

The A-16R Personal Mixer is a rack-mountable version of the A-16II. The A-16R includes additional audio I/O options designed for seamlessly connecting to wireless IEM transmitters and power amplifiers.

Features

Remote-controllable sixteen-channel stereo digital mixer
Channel volume and pan control with LED readout
Dedicated Recall, Group, Solo, and Mute buttons
Sixteen user Preset memory locations
Front-panel headphone jack
Master Volume, Treble, and Bass controls
Balanced XLR and TRS outputs
Balanced TRS inserts
Auxiliary stereo mix in

Sixteen channel select buttons with dual LEDs

MIDI control over mix and preset save/recall

The A-16R Personal Mixer is a remote-controllable 16-channel stereo digital mixer. Like the industry standard A-16II, the A-16R can be used to give individual performers independent control of their monitor mixes. The A-16R is specifically designed for users of wireless in-ear-style monitors or floor wedges, and for applications where both an engineer and a performer need control over the monitor mixes.

In commercial environments, the A-16R can be effectively used in applications ranging from conferencing to room combining to simple mixing in a gymnasium or auditorium.

The A-16R provides intuitive control over volume and pan for 16 channels, as well as master volume and tone. Each A-16R can store up to sixteen preset mixes, with three subgroups per Preset. Individual channels, channel pairs, or groups can be soloed or muted.

The A-16R can be controlled remotely from the optional A-16CS Control Surface or by select third-party controllers and touch panels. Remote control allows the A-16R to be placed in an equipment rack with other gear, such as amps or transmitters, while still allowing a user to control the mix. The A-16CS is connected to the A-16R with a single Cat-5e cable, up to 200ft (60m).

The A-16R provides balanced line-level outputs on XLR or " TRS jacks. Insert send and return points are provided via balanced " TRS jacks. MIDI In, Out, and Thru jacks provide the ability to save/load settings or select A-16R presets via MIDI. An auxiliary stereo mix input supports input of local audio such as a click track.

Audio is provided to the A-16R on a Cat-5e cable via Aviom's ultra-fast Pro16(tm) A-Net protocol. Pro16 A-Net supports plug-and-play set-up, long cable runs (up to 500ft/150m between devices), and 24-bit uncompressed digital audio. Mixers can be connected in series or in parallel, using the A-16D or A-16D Pro A-Net Distributor. Power can be supplied locally with an external DC power supply or remotely, over the Cat-5e cable, using an A-Net Distributor.

The A-16R Personal Mixer can be used in virtually any combination with other Pro16 devices. There is no limit to the number of Personal Mixers that can be used in a system.

Specifications

Audio Outputs:

Impedence matched output

Headphone Output:

Front panel; TRS; Tip: Audio Left;
Ring: Audio Right; Sleeve: Ground

Mix input, stereo:

Balanced 1/4' TRS; front-panel volume control
Insert send/return:
Balanced 1/4" TRS

A-Net I/O:

1 A-Net In, 1 A-Net Out; RJ45 connectors

D/A Conversion:

44./48kHz, 24 bit
Indicators:
Pan: 5 LEDs, 4 red, 1 green;

Channel Volume:
12 red LEDs

Stereo Operation:

Stereo Link, per channel pair; set at the input module
Variable pan/spread per channel or channel pair

Tone Controls:

Treble: ±12dB at 9kHz shelving
Bass: ±12dB at 160Hz shelving

Output Impedance:
140 ohms

Freq. Response:

4Hz-22kHz +0.2dB/-3dB
THD +N: <0.003%

Signal to Noise (unweighted):

-90dB typical, A/D to D/A
Measured from AN-16/i to A-16II

Crosstalk:

-90dB

Latency:

0.880 msec (measured from analog input to analog output)
A-Net Pro16: uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between device

Remote Control:

A-16CS: A-Control, RJ45 jack, max. 200 ft (60m)
Compatible with select third-party controllers

Power Supply:

Input Voltage
Output Voltage
Plug Size External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm

Dimensions:

19" (482.6 mm) x 6.7" (170.2 mm) , 1U high

Weight:
3.4 lbs (1.54 kilo)

Options:
A-16CS Control Surface
MT-1 Mic Stand Bracket (for A-16CS)
EB-1 Extension Bracket




Aviom A360 Personal Mixer Price: $799.00

A360 Personal Mixer Overview

Aviom's A360 Personal Mixer delivers a new level of control, performance, and fidelity to personal mixing on stage and in the studio. With more mix channels, innovative new features, and the streamlined user interface Aviom Personal Mixers are known for, the A360 will help you hear better than ever before.

A360 Features

More Channels

The A360 is powered by an advanced 36-channel mix engine, giving you more channels to mix. The mix engine supports 16 standard stereo or mono mix channels, the stereo or mono Dual Profile Channel_, and stereo or mono ambience. All channels can be individually selected for each A360 from up to 64 channels in the system.

Stereo Fidelity in Every Channel

Each mix channel on the A360 can be either stereo or monowhich means you don't have to give up the fidelity of your stereo keyboards, guitar effects, or submixes in order to save channel space on your Personal Mixer. Every audio source can be heard in full stereo fidelity without taking up additional space on the mixer. This both ensures that every channel sounds its best, improving the fidelity of the overall mix as well, and frees up space for more mix contentwithout adding more complexity for the musician.

Enhanced Stereo Placement

The A360 gives you more control over the stereo image of the entire mix with the new Stereo Placement_controls. With high-resolution panning for mono channels and the innovative Pan-Spread control for stereo channels, every channel can be positioned precisely in the stereo field of the mix, without losing any fidelity of individual channels.

Per-Channel Volume, Reverb, and Tone

In addition to Stereo Placement, the A360 gives you control over each channel's volume, as well as tone and reverb. More control over each channel lets you get a better sounding mix fast.

Dual Profile Channel

The innovative Dual Profile Channel_may be used as a seventeenth stereo or mono mix channel or as a mirror of one of the 16 standard mix channels. Either way, the Dual Profile Channel stores two sets of channel settings for the assigned channel (A and B), allowing you to quickly change the volume, stereo placement, reverb, and tone of a selected channel without affecting the rest of the mix.

One-Touch Ambience

The A360 allows you to bring ambience in when you want it and to quickly get rid of it when you don't. Because the A360 has a dedicated section for ambience audio in the 36-channel mix engine, you can add ambience to the mixusing either the onboard ambience mic or setting up room mics and sending the channels over the Cat-5 cablewithout sacrificing other channels

Customizable Channel Selection & Layout

Each A360 in a system can draw its channels from all the channels in the systemup to 64 channels can be available. Giving the drummer lots of drum channels and the singers all their vocal mics has never been easier. With the A360, every musician can control exactly the channels they need, giving everyone more control without more complexity.

Instant Mix Recalls

The A360 gives you 16 standard presets, plus four Instant Mix Recalls_, giving each musician plenty of spaceand streamlined accessto his or her favorite mixes.

Master Bass, Treble, and Enhance

Three-band master tone controls allow you to tune the output of the A360 to your exact preferences without a lot of hassle. The Enhance_control was specially designed to help musicians get the most out of their in-ear monitors and headphones, delivering more punch in the bass and more sizzle to the highs, simply and quickly, without needing to understand EQ or spend lots of time tweaking.

Mono Mix Out

In addition to 1/4" and 1/8" stereo output for headphones and in-ears, the A360 adds an XLR Mono Mix Out with dedicated volume control. This added connector streamlines connections to a powered wedge or subwoofer, including Bass Shakers and Buttkickers.

USB Transfer

A rear-panel USB jack allows you to take all of your mixer settings with you, for safekeeping or for loading onto a different mixer.

Advanced 6-channel mix engine

Customizable channel selection from a
64-channel network pool

16 standard mono or stereo mix channels plus
customizable Dual Profile Channel

Enhanced Stereo Placement controls for
improved sonic clarity

Per-channel volume, tone, reverb, and
pan-spread

Three-band master tone control optimized for
in-ear monitors

One-Touch Ambience control using onboard mic
or network audio channels

Four Instant Mix Recall presetsplus 16
standard mix presets

USB for mixer profiles and mix settings

1/4 and 1/8 TRS Stereo Mix Out

XLR Mono Mix Out with dedicated volume control

Seamless integration with existing Aviom personal mixing systems



Aviom AN-16/IM 16 Ch Mic + Line Level Input Module Price: $2,520.00

The AN-16/i-M converts 16 mic- or line-level analog audio channels into uncompressed, full bandwidth 24-bit digital audio transmitted via A-Net.

Features

Sixteen high quality mic preamplifiers, with 24-bit A-to-D converters
XLR mic or 1/4-inch TRS balanced line-level inputs on combo jacks
48-volt phantom power on each channel
Three-segment LED level meter
Continuously variable gain knob for each channel
Phase reverse switch per channel
Rumble filter switch (85Hz rolloff) on each channel
Stereo Link switch per pair of channels
Built-in passive mic splitter
Balanced insert send and return jacks (1/4-inch TRS)
Dual A-Net outputs
A-Net Expansion jack for 32x0 and 16x16 channel systems
Internal universal power supply; IEC power connector

The AN-16/i-M is a 3U-high rack-mounted mic- and line-level input device with sixteen high-quality microphone preamps and 24-bit A-to-D converters. Each channel contains a three-segment level meter, a continuously variable gain knob, a phase reverse switch, 48-volt phantom power, and a rumble filter with an 85Hz rolloff. In addition, each pair of channels can be Stereo Linked for stereo operation in a Pro16 Monitor Mixing System.

The rear panel of the AN-16/i-M contains a host of professional connectivity features. Each channel has a combo jack that can accept either XLR mic or 1/4-inch line-level (balanced or unbalanced) inputs. Sixteen passive mic Thru connectors create a built-in microphone splitter. Balanced insert points with separate 1/4-inch Send and Return jacks allow easy interfacing with external processing devices. The sixteen insert Sends can also be used as a set of post-gain direct audio outputs. The AN-16/i-M uses an internal power supply with a standard IEC power connector.

Two parallel A-Net outputs allow the AN-16/i-M to send A-Net data to multiple destinations, allowing for simultaneous patching to a monitor console and a front-of-house console. Both A-Net outputs feature heavy duty Neutrik EtherCon combo RJ45 connectors. The built-in A-Net Expansion jack allows two 16-channel A-Net streams to be combined onto a single cable (32x0 or 16x16), and the AN-16SBR System Bridge can be used to combine up to four 16-channel streams onto a single cable in a variety of bi-directional configurations.

As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices.

Specifications

Input:

XLR, TRS; Combo Jack

Insert Send/ Return:
Connector: TRS, Signal: Impedance Balanced,
Nominal Level: 0 dBu

A-Net Output:

one Category 5 (RJ45 connector)

A-Net Expansion:

one Category 5 (RJ45 connector)

Gain Range:

Mic: +6dB to +60dB, variable
Line: -15dB to +36dB, variable

Input Impedance:

Mic: 2.4 ohms
Line (TRS): 33k ohms
Insert Return: 39k ohms

Low Cut Filter:
-3dB @85Hz, -18dB per octave

Phantom Power:
+48 volts, per channel

A/D Converters:

24 bit

Digital Outputs:

A-Net: 2 (Main and Aux)

A-Net Expansion:

1

Power Supply:

Internal, universal switching type; standard IEC cable provided

Voltage:

100-240VAC, 50-60Hz, 60W

Dimensions:

19" wide x 9.25" deep x 5.25" high (3U)

Weight:

12 lbs.




Aviom AN16i Version 2 16 Channel Line Level Input Module Price: $1,195.00
The AN-16/i v.2 Input Module provides
sixteen channels of analog-to-digital
conversion as the head end for the
Avioms industry standard personal
mixing system and modular digital
snake products.

The module converts
sixteen line-level analog audio channels
into uncompressed 24-bit, 48kHz
digital audio data.

The AN-16/i v.2 includes an A-Net
Input jack for connecting up to three
additional Pro16 Series input devices.
The AN-16/i v.2 merges its analog
inputs with the incoming A-Net stream,
creating the expanded Pro16e digital
audio stream utilized by Avioms A360
Personal Mixer. The digital audio data is
output on standard Cat-5e cables.
The AN-16/i v.2 front panel has eight
four-position input level/gain sensitivity
switches, stereo channel link switches
for every channel pair, and per-channel
signal present and clip LEDs. Digital
network connections on the rear panel
include one A-Net In jack and one A-Net
Out jack.

The rear panel of the AN-16/i v.2 also
features 16 analog audio inputs with balanced
TRS jacks. An audio Thru jack
for each input allows the AN-16/i v.2
to be inserted seamlessly into an existing
audio signal path. The AN-16/i v.2
can be used with any line-level analog
audio signal such as console direct outs,
inserts, or aux sends.
The AN-16/i v.2 is equally at home
with Avioms modular Pro16 digital
snake and audio distribution system
products, supporting a range of flexible
configurations including: 16x0, 32x0,
48x0, 64x0, 16x16, 32x16, 32x32, and
48x16. All configurations support an
unlimited number of digital splits, with
no loss in audio quality.



Shure Earphone Sleeves (LG.) Black Foam (10/PK) Price: $19.99
Large Black Foam Sleeves E3, E4, E5, E3C, E4C, E5C, SCL3, SCL4, SCL5, SE115, SE215, SE315, SE425, and SE535 earphones (Ten Included/Five Pair)


Shure Earphone Sleeves (M) Black Foam (10/PK) Price: $19.99
EABKF1-10M

MediumBlack Foam Sleeves E3, E4, E5, E3C, E4C, E5C, SCL3, SCL4, SCL5, SE115, SE215, SE315, SE425, and SE535 earphones (Ten Included/Five Pair)


Shure Earphone Sleeves Sm. Black Foam (10/PK) Price: $19.99

Black foam sleeves are tapered, washable, and offer extended durability allowing for longer wear. Gently compress the foam to create a comfortable fit and snug acoustic seal that holds the earphones firmly in place while blocking out ambient noise.

Available in three sizes (small, medium, large) and sold in packages of 5 pairs.  Medium size black foams are equivalent in fit to the yellow foam sleeves.

Included with SE model earphones (except SE102MPA.) Also compatible with E3c, E4c, E5c, E500PTH, i3c, and i4c models

NOT compatible with SE102MPA, E2c, E2g, i2c, i2c-t or QuietSpot models.

EABKF1-10S  (replaces PA910S) - 5 pair, small
EABKF1-10M  (replaces PA910M) - 5 pair, medium
EABKF1-10L  (replaces PA910L) - 5 pair, large




Aviom EB1 Side Extension Bracket for MT1 Price: $32.00

The EB-1 allows the MT-1 Mic Stand Mount to be attached to the shaft of a mic stand.

The EB-1 Extension Bracket allows an A-16II or A-16CS to be mounted on the shaft of a standard mic or music stand. The right-angle bracket requires the MT-1 Mic Mount.

The additional photo shows a Personal Mixer mounted to a mic stand using the MT-1 and EB-1 brackets.




Sennheiser EW 300 IEM G3 In Ear Monitor System Price: $999.95

Hear better, perform better.

Sennheiser monitoring systems are trusted by professionals worldwide and now are better than ever. Featuring an adaptive-diversity receiver, the receiver pack uses the headphone cable as a secondary antenna for flawless reception. Ear-canal phones, with various ear-fitting pads for an individual fit, reproduce the signal from the adaptive diversity receiver precisely and faithfully. Pass-through outputs allow easy splitting of the input signal to travel to other devices. The 5 band equalizer integrated in the transmitter also allows you to personalize the sound even further. Lastly, the entire set can be monitored and remotely controlled with Sennheisers Wireless Systems Manager software due to the built-in Ethernet port on the stereo transmitter.




Aviom L25 LayFlat 25Ft Cat 5e Cable Price: $20.00

Aviom offers premium quality Cat-5e cables in a variety of lengths.

One Cat-5e cable ships with each A-16II Personal Mixer and A-16CS Control Surface. Replacement cables are available for all A-Net products in a variety of lengths. Cables used with A-Net products are standard Category 5e network cables.

Aviom replacement Cat-5e cables are available in lengths of 30, 50, and 100 feet. If you need a longer cable for an application, any computer store should be able to supply you with an appropriate cable. A qualified technician should be able to build custom cables to any length (up to the maximum of 500 feet, 150 meters).

Dimensions:
L-25 25 feet/ 7.6m



In Ear Monitor Systems

Narrow By:
Category:
Price:
Brand:
More Ways to Shop:
School Discounts! School Bids Attention Churches! Discounts for Government Agencies! No Hassle Return Policy!
MusiciansBuy Financing

Shure SE215 Sound Isolating EarPhones Black Shure EarBuds Price: $99.99

Dynamic MicroDriver
Featuring Dynamic MicroDriver, the SE215 delivers detailed sound with enhanced bass. A detachable cable with formable wire enables easy replacement and a secure, comfortable fit on-stage or on-the-go. Sound Isolating sleeves in multiple sizes provide up to 37 dB of isolation and a customized fit. Available in translucent black or clear color choice.

Product Overview:

  • Detailed Sound with Enhanced Bass
  • Sound Isolating Design
  • Speaker Type: SingleDynamic MicroDriver
  • 2-Year Limited Warranty (see warranty information)
  • Included Fit Kit
  • Available in Clear or Translucent Black

Evolved from personal monitor technology that's been road-tested by pro musicians, the SE215 delivers detailed sound for personal listening or professional monitoring. Dynamic MicroDrivers deliver detailed sound with enhanced bass.

Speaker Type
Single Dynamic MicroDriver

Sensitivity (1kHz)
107 dB SPL/mW

Impedance (1kHz)
20

Noise Attenuation
Up to 37 dB

Frequency Range
22Hz 17.5kHz

Input Connector
Gold-plated 3.5 mm (1/8)

Cable
64 Detachable (at ear) with wireform fit

Color
Available in Clear or Translucent Black




Shure SE315 Sound Isolating EarPhones High Definition (Black) >> Shure EarBuds Price: $199.99

High-Definition MicroDriver + Tuned BassPort
Featuring single High-Definition MicroDrivers, the SE315 delivers full range sound and optimized low-end performance utilizing a vented driver. A detachable cable with formable wire enables easy replacement and secure, comfortable fit on-stage or on-the-go. Sound Isolating sleeves in multiple sizes provide up to 37 dB of isolation and a customized fit. Available in black or clear color choice.

Product Overview:

Full Range Sound
Sound Isolating Design
Speaker Type: Single High-Definition MicroDriver + Tuned BassPort
2-Year Limited Warranty (see warranty information)
Included Fit Kit
Available in Clear or Black

Evolved from personal monitor technology that's been road-tested by pro musicians, the SE315 delivers full range sound for personal listening or professional monitoring. High-Definition MicroDrivers deliver full range sound while the Tuned BassPort optimizes low-end performance utilizing a vented driver.

Speaker Type
Single High-Definition MicroDriver + Tuned BassPort

Sensitivity (1kHz)
116 dB SPL/mW

Impedance (1kHz)
27

Noise Attenuation
Up to 37 dB

Frequency Range
22Hz 18.5kHz

Input Connector
Gold-plated 3.5 mm (1/8)

Cable
64 Detachable (at ear) with wireform fit

Color
Available in Clear or Black




Shure SE425 EarPhones Dual Driver (Clear). Shure EarBuds Price: $299.99
Sound Isolating Earphones

Dual High-Definition MicroDrivers
Featuring Dual High-Definition MicroDrivers, the SE425 uses a dedicated tweeter and woofer for an accurate and balanced sound. Detachable cable with formable wire enables easy replacement and secure, comfortable fit. Sound Isolating sleeves in multiple sizes provide up to 37 dB of isolation.

Product Overview:

  • Accurate and Balanced Sound
  • Sound Isolating Design
  • Speaker Type: Dual High-Definition MicroDrivers
  • 2-Year Limited Warranty (see warranty information)
  • Included Fit Kit
  • Available in clear or metallic silver

Designed for the demanding audio specifications of live performance, the SE425 is engineered to provide reference quality audio. Hear all the details of your music with Dual High-Definition MicroDrivers that deliver an incredibly accurate and balanced listening experience




Shure P2TR215CL Wireless in Ear Monitor System Price: $599.99

PSM200 Personal Monitor Systems are an affordable alternative to floor wedges for entry-level performers looking to transition to in-ear monitoring.

Includes P2R hybrid bodypack receiver, P2T wireless TransMixer, SE215-CL Sound Isolating Earphones, power supply, rackmount kit, 9V battery, zipper bag, cable, and user guide.

System Includes

P2R World's first bodypack receiver to function as wired, wireless, or both at the same time.
P2T Breakthrough design allows connection of 2 line-level or mic-level inputs directly into the transmitter.
SE215 Single Dynamic MicroDriver for detailed sound with enhanced bass. Detachable cables.