CRATE CA6110DG Details top
When you need to send the perfect acoustic signal to the front-of-house mixer, the Crate CA6110DG can get you there in style. With features like XLR & 1/4" balanced line out (with Level control and ground lift), Tweeter Level control, Effects Loop, and footswitch accessible Reverb/Effects and Chorus switching, it's easy to see why the Crate CA6110DG is the leader in its class.
Designed for the performing artist, CA6110DG's 60 watt power amp drives the internal 10” polypropylene woofer/piezo tweeter combination to outstanding volume levels, providing both low end punch and superb top-end fidelity. And since volume without tone just doesn't cut it, the CA6110DG provides two separate channels, each with its own gain, EQ, and reverb/effects controls. Crate's built-in feedback filters make feedback a thing of the past, effectively killing feedback without sacrificing sound quality. We've even included the footswitch for hands-free operation of the feedback filters.
The CA6110DG also features 16 of Crate's stunning DSP effects, including short and medium Slapback Delays, Echo, Chorus, Rotary Speaker, Chorus (with Hall Reverb), and two distinct Reverb modes. These effects were designed specifically for use with acoustic instruments and vocals.
Whether you need the perfect acoustic guitar amp, or a self-contained PA system with digital effects and feedback control, the Crate CA6110DG is all about tone, control, and flexibility.
- Crate 10" high fidelity woofer and special coax tweeter
- 60 watts RMS
- Two channels
- Auto feedback elimination circuit
- 16 digital effects with level control
- RCA CD/MP3 input
Why is it so hard to amplify an acoustic guitar? By its very nature, an acoustic instrument requires lots of feedback control, especially when it's asked to compete with drums and a stage full of rockers. And although most amps can effectively control feedback, they often do so by severely sacrificing tone for volume.
Our CA Series amps give you all the tone and features necessary to put your acoustic sound on top of the mix, whether you're soloing at the Opry or strummin' at the coffeehouse. With its unparalleled balance of clarity, power, natural tone, and intuitive controls, the Crate Acoustic Series remains our most widely endorsed amp line. Try one and you'll see why.
CRATE CA6110DG Specs top
Output Power Rating: 60 watts @ <1% THD
Channels 1 & 2: Low: +/-15dB @ 80Hz
Mid: +15, -30dBdB from 450Hz – 1.2kHz (Contour)
High: +/-15dB @ 10kHz
Input Impedance: 3.3M ohm High-Z, 3k ohm Low-Z
Input Sensitivity: 5mV High-Z, 2mV Low-Z
Sens. to Eff Send/Line out: 6mV High-Z, 3mV Low-Z
Max Input Signal: 6V RMS (17V peak to peak)
CD Input: Input Impedance: 22k ohm
Input Sensitivity: 150mV
Max Input Signal: 6V RMS (17V peak to peak)
AuxEff. Return: Input Impedance: 11k ohm
Input Sensitivity: 60mV RMS
Max Input Signal: 6V RMS (17V peak to peak)
Eff Send Out. Impedance: 2.2k ohm
Line Out Out. Impedance: 220 ohm Low-Z, 2.2k ohm High-Z
Feedback Filters: 10Hz to 4.8kHz range, -15dB cut per filter
Internal Woofer: 10” w/polypropylene cone, rubber surround, 30.5oz magnet, 1.5” voice coil,
8 ohms, 75w RMS, 95dB 1w 1m
Internal Tweeter: High efficiency Piezo, 110dB 1w 1m
Internal Crossover: Passive type
Power Requirements: 120VAC, 60Hz, 70VA
100/115VAC, 50/60Hz, 70VA
230VAC, 50/60Hz, 70VA
Size and Weight: 17”H x 16”W x 14”D, 37 lbs.
Zoom / More pics 
Print this Page 
Gifts 
Details 
Specs 
Manuals 
Artists 
More Pics 
Warranty 
