Behringer XL3200 Mixer 32 Input 4 Bus with Xenyx Mic Preamps
Available - Please allow 10 to 14 days for delivery.
In stock! Most orders placed before 3pm EST ship the same day!
Low stock! Order today and our staff will keep you updated when your order ships.
We have more on the way. Order now and we'll keep you updated as to when your order will ship. For more assistance, please call us at 877-778-7845!
Unavailable! We are no longer able to get this product from the vendor. Call us at 877-778-7845 and our staff will assist you in finding a replacement.
Arriving soon! Preorder and reserve yours now! We have placed large orders for this item to ensure early delivery. Your order will ship the same day we receive it from the vendor.
Free Shipping Over $99*
No Tax Outside FL and PA!
Items included in this bundle
Introducing a bold new line of live sound mixers that combine professional features, dramatic styling and astounding value. XL Series intuitive layout and color-coded control interface is designed to make them easier to use. Weve added the features youve been asking for and then some. And of course the XL3200, XL2400 and XL1600 are built around our proven XENYX high-headroom, low noise mic preamps and warm, musical EQ.
The Ins and Outs
Some manufacturers can be sneaky when they tell you how many inputs their mixers have, counting features like CD/TAPE IN as an input. But the XL series really gives you 8 (XL1600), 16 (XL2400) and 24 (XL3200) mono channels and four stereo channels (with two 1/4" inputs apiecean additional 8 line-level inputs (which can also be used for 4 additional mono mic channels), making it easy to accommodate a wide variety of live performance configurations.
Depending on which XL mixer you choose, that means you can connect up to 8, 16 or 24 microphones (or other mono instruments) and up to four stereo instruments (keyboards, for example). You also get four buses, allowing you to assign multiple channelssay all the mics on a drum kit or all the backup singers micsto a single fader.
Best of all, you dont need a black belt in engineering to operate the XL series. To get started, assign all mics and instruments to their channels by connecting them to the corresponding jacks on the back panel. Now, get ready to quickly become acquainted with the XL series incredibly user-friendly design.ixer you choose, that means you can connect up to 8, 16 or 24 microphones (or other mono instruments) and up to four stereo instruments (keyboards, for example). You also get four buses, allowing you to assign multiple channelssay all the mics on a drum kit or all the backup singers micsto a single fader.
Plenty of Channels, All in Living Color
All dials on the XL series are assigned to colors that not only allow you to easily locate each function, but to also quickly identify corresponding faders.
At the top of each mono channel strip, youll find a TRIM dial (white) for adjusting input gain and an 80 Hz switch that can eliminate unwanted infrasonics such as mic-handling noise.
Each mono channel has a 4-band EQ (High, High Mid, Low Mid, Low). High Mid and Low Mid dials (blue) are each paired with a FREQ control (lighter blue) that allows you to select the frequency boosted or cut. Directly below the EQ, theres an EQ switch allowing you to switch between processed and unprocessed signals.
What the Heck is British EQ?
British EQ is a smashing thing to have on your side when you start reaching for those channel equalization knobs at a live concert or in the studio.
The EQs on British consoles from the 60s and 70s are what many engineers believe does their sound the best justice. When it comes to tweaking your sound, theyre kind, gentle and above all, musical. Its like drinking a fine scotch instead of fortified wineor maybe receiving a warm hug instead of a kick to the crotch.
British EQs distinct configuration of wider curves/lower Q and harmonic phase characteristics allows you to add or subtract EQ more generously than you can with conventional EQ circuit designs. When you add low midrange, you get a firmer sound instead of a nasty bonk. When you back high frequencies off a bit, treble backs off just a hair instead of turning muffled.
Back to the Strip
Controls for the channels FX (orange), MON (blue) and AUX (red) sends are directly below the EQ section. Use these to assign a channel to an outboard FX processor or monitor and auxiliary channels. Further down the channel strip, the PAN control (black) determines the signals position in the stereo mix. The channel fader (black) adjusts the level of the channel signal as part of the main mix. Press the 1-2 or 3-4 switches to assign the channel to a bus.
Stereo channels are configured in the same way, but with a fixed-frequency 4-band EQ (blue). They are equipped with 1/4 stereo inputs, as well as XLR mono inputs, providing 4 additional Mic channels.
Once all mics and instruments are connected, its time to take a look at the MAIN, subgroup, MONITOR and FX sections. All four subgroups controls are positioned in the lower right corner of the mixer. They feature individual faders with CLIP LEDs, SOLO switches and PAN controls to adjust the signals position in the stereo image.
The FX section is positioned on the middle right section of the console. Both FX 1 and FX 2 signals have orange faders; SOLO and MUTE switches; 1-2 and 3-4 switches that assign the signal to subgroups; MAIN switches to route the signals to the main outputs; MON dials (blue) that determine the level of FX heard in Monitor sends 1 & 2; and SEND dials (orange) for adjusting the volume of all FX send signals. Both monitor sends also have their own dedicated faders (blue), as well as MUTE and SOLO switches.
The MAIN A section lies in the bottom right section of the board. It gives you a channel fader (light grey); a 13-LED master level meter in the top right corner gives you a dynamic visual gauge of overall output; a MUTE switch (red) mutes all input channels except CD/TAPE inputs; and a BAL control (black) adjusts the mix of the left and right output signal before they are routed through the MAIN A output. Above, youll find the MAIN B section, which governs the signal sent through the MAIN B outputs on the back panel. Use the MAIN B section and outputs to connect to a separate power amplifier and multiple loudspeakers, or to a stereo recording system.
Talking back, listening up The XL series features a Talkback section in the upper right corner with its own XLR input, LEVEL control (red), and switches that allow you to send its signal to either the MON, AUX, GROUP or MAIN outputs. Finally, a pair of headphone inputs at the top of the board allows you to personally monitor your mix, and a pair of BNC lamp inputs ensures youll never have to mix in the dark.
The Back Story
The back panel of XL series mixers features an intuitive patch bay that gives you tons of flexibility in configuring a live show. In the upper left corner youll find the MAIN OUTPUTS section. Theres left and right XLR outputs for connecting to PA speakers, as well as dual 1/4" inserts for connecting a dynamics processor or equalizer to further tweak the main signal. Theres also dual OUT B jacks governed by the MAIN B dial on front. Next door to the MAIN OUTPUTS section is the FX/MON/AUX SENDS section. The FX 1 and FX 2 1/4" outputs send signal to outboard effects processors. MON 1 and MON 2 XLR outputs send signal to monitors, and AUX 1 and AUX 2 XLR outputs can be used for either effects processors or monitors.
The next section to the right contains the AUX RETURNS. Stereo AUX inputs 1 & 2 allow you to connect more effects processors or submixers, while stereo FX 1 & 2 returns accept processed signals sent from the FX 1 and FX 2 outputs.
Left and right SPEAKER 1/4 outputs allow you to connect monitor speakers that provide the same signal as the headphone outputs.
Each subgroup has its own INSERT and OUT 1/4" jacks. The inserts allow you to connect noise gates, compressors or equalizers, while the OUT jacks send the subgroup signal to, for example, a multi-track recorder.
Along the bottom of the back panel, youll find the mono and stereo channel inserts. Mono channels feature both a 1/4" and XLR input, as well as an INSERT jack for applying outboard equipment and a DIRECT OUT jack for sending signal to a device such as a multi-track recorder. Stereo channels feature a single XLR input and dual 1/4" inputs.
Your Behringer XL3200 Mixer 32 Input 4 Bus with Xenyx Mic Preamps review
Reviews usually appear on the site within one week of posting. All reviews are checked by an editor to insure they are
relevant and contain appropriate language. We do post negative reviews, as long as they are constructive and do not contain profanity.
The best reviews include not only whether you liked or disliked the product, but also why. Written comments are required. Be constructive
and specific with your praise or criticism. It will help other people believe you. While we appreciate your time and comments, we
respectfully request that you refrain from including the following in your review:
- Profanity, obscenities, or spiteful remarks.
- Single-word reviews. We want to know why you liked or disliked the item.
- Phone numbers, mail addresses, URLs.
- Availability, price, or alternative ordering/shipping information.
Reviews are typically posted within three days. All reviews become the sole property of MusiciansBuy, and may be used at MusiciansBuy's