ALTO LYNXMIX124 Specs top
Mono Input Channels
Microphone Input Electronically balanced, discrete input configuration
Frequency Response 10 Hz to 55 kHz, +/-3 dB
Distortion (THD & N) 0.005% at +4 dBu, 1 kHz
Gain Range 0 dB to 50 dB (MIC)
SNR (Signal to Noise Ratio) 115 dB
Line Input Electronically balanced
Frequency Response 10 Hz to 55 kHz, +/-3 dB
Distortion (THD & N) 0.005% at +4 dBu, 1 kHz
Sensitivity Range +15 dBu to -35 dBu
Stereo Input Channels
Line Input Balanced/Unbalanced
Frequency Response 10 Hz to 55 kHz, +/-3 dB
Distortion (THD & N) 0.005% at +4 dBu, 1 kHz
Impedances
Microphone Input 1.4 kOhm
Channel Insert Return 2.5 kOhm
All Other Inputs 10 kOhm or greater
Tape Out 1 kOhm
All Other Output 120 Ohm
Equalization
Hi-shelving +/-15 dB @12 kHz
Mid bell (Mono) +/-15 dB -frequency range 100 Hz~8 kHz
Hi-Mid (Stereo) +/-15 dB@3kHz
Mid-Low (Stereo) +/-15 dB @ 500 Hz
Low-shelving +/-15 dB @ 80 Hz
Low Cut Filter 75 Hz, 18 dB/Oct.
DSP Section
A/D & D/A Converters 24-Bit
DSP Resolution 24-Bit
Type of Effects Hall, Room, Vocal & Plate REVERBS
Mono & Stereo DELAY (Max DELAY TIME 650ms)
Chorus, Flanger & Reverb MODULATIONS, REVERB+DELAY
REVERB+CHORUS, REVERB+FLANGER Combinations
Presets 256
Controls 16-Position PRESET/VARIATION Selector
DSP MUTE SWITCH with PEAK LED Indicator
Main Mix Section
Noise (Bus Noise) Fader 0 dB, Channels Muted: -100 dBr (ref.: +4 dBu)
Fader 0 dB, all input channels assigned and set to
UNITY Gain: 90 dBr (ref.:+4 dBu)
Max Output +22 dBu Balanced XLR; +22 dBu Unbalanced, 1/4" jacks
AUX Returns Gain Range -to +15 dB
AUX Sends Max Out +22 dBu
Power Supply
Main Voltage USA/Canada 100-120 VAC~60 Hz
Europe 210-240 VAC~ 50 Hz
U.K./Australia 240 VAC~ 50 Hz
Power Consumption 40 Watts
Fuse T500 mAL
Main Connection Standard IEC Receptacle
Physical
Dimension (W D H) 415 mm 400 mm 38/115 mm (16.34" 15.75" 1.49"/4.53")
Net Weight 6.7 Kg (14.8 lb)