Yorkville PM16 PowerMax Powered Mixer (4) 800 WATT AMPS
PM16PACK
Details Features Specs More Info
Features
- 4 x 800 watt Integrated Amplifiers
- 2 x 24bit Internal Stereo Multi-Effect Processors
- 2 x Pre-fade Auxiliary Sends (Monitors)
- 3 x Post-fade Auxiliary Sends (Effects and Aux)
- Stereo 9-band Graphic EQ (Mains)
- 2 x 9-band Mono Graphic EQ's (Monitors)
- 3-band Channel EQ's with Mid Sweep (Mic Channels)
- 4-band EQ's (Stereo Channels)
- Solo AFL/PFL & Mutes on All Input Channels
- Switchable 80Hz Hi-pass Filter on All Mic Input Channels
- Defeatable Channel Overload Protection (C.O.P.™)
- Selectable Speaker Processor Output (50/80Hz Boost)
- Top Mounted Output Patch Bay
- Global 48V Phantom Power
- Integrated Carry Handle
Specs
|
Number of Channels |
16 |
|
Channel Inserts |
7 to 12 |
|
Mono Channel EQ |
(ch.1 to 12) High, Mid, Mid Sweep, Low |
|
Stereo Channel EQ |
(ch.13 to 16) High, High Mid, Low Mid, Low |
|
Channel Effects |
All Channels |
|
Monitors Effects |
Yes |
|
Balance Controls |
13 to 16 |
|
Pan Controls |
1 to 12 |
|
Channel Overload Protection |
1 to 12 |
|
Inputs - XLR (bal) |
Ch. 1 - 12 |
|
Inputs - 1/4" |
Ch. 1 - 16 |
|
Inputs - RCA (unbal) |
2 Stereo Sets |
|
Solo Switches |
All Channels, Mon1, Mon2, EFX Returns |
|
Mute Switches |
All Channels |
|
Hi Pass Switches |
Channels 1 to 12 |
|
Activity / Solo LED |
All Channels |
|
Clip /Mute LED |
All Channels |
|
Phantom Power |
48 V + LED indicator |
|
VU Meter |
2 x 12 LEDs with Floating Peak |
|
Headphone Monitor Features |
Level, AFL/PFL Switch, 1/4 inch Stereo |
|
Internal Effects |
2 x 24 Bit stereo, 16 Effects with Parameter Pot |
|
Auxiliary Sends |
1 TRS |
|
Effects Send |
2 (1 Internal , 1 Internal/External) |
|
Effects Return |
2 stereo pairs on 1/4 inputs |
|
Effects Return to Main |
Yes |
|
Effects Return to Monitor |
Yes |
|
Reverb / Effects Footswitch |
Yes |
|
Record Outputs |
1 Stereo RCA |
|
Max Gain to Line Out -Mic Input (dB) |
72 |
|
Max Gain to Line Out -Line Input (dB) |
56 |
|
Master EQ -1 (type /Channels /Range - dB) |
Graphic / Stereo / 9 Band 63 Hz - 16,000 Hz |
|
Monitor EQ -1 (type /Channels /Range - dB) |
Graphic / Stereo / 9 Band 63 Hz - 16,000 Hz |
|
Monitor EQ -2 (type /Channels /Range - dB) |
Graphic / Stereo / 9 Band 63 Hz - 16,000 Hz |
|
Main Outputs ( Line Level) |
Amp A/B (1/4 inch TRS) |
|
Main Amp Inputs (Line Level) |
Amp A/B (1/4 inch TRS) |
|
Monitor Outputs (Line Level) |
Mon 1/2 (1/4 inch TRS) |
|
Monitor Amp Inputs (Line Level) |
Amp C/D (1/4 inch TRS) |
|
Outputs - Amp A - 1/4" Jacks |
2 |
|
Outputs - Amp A - Speakon 4-pin |
1 |
|
Outputs - Amp B - 1/4" Jacks |
2 |
|
Outputs - Amp B - Speakon 4-pin |
1 |
|
Outputs - Amp C - 1/4" Jacks |
2 |
|
Outputs - Amp C - Speakon 4-pin |
1 |
|
Outputs - Amp D - 1/4" Jacks |
2 |
|
Outputs - Amp D - Speakon 4-pin |
1 |
|
Mixer - Signal to Noise Ratio (dB) |
greater than 100 |
|
Mixer - Frequency Response (Tone and EQ Flat,+/-2dB) |
20 Hz - 20,000 Hz |
|
Mixer - Input Referred Noise to line out, @ 150 Ohms (dBv) |
-117 (@ 150 Ohms (dBv)) |
|
Mixer THD (Main out w/ -10dB input) |
less than 0.03% |
|
Amp A - Power Output @ 8 Ohms (0%1"THD, 1kHz) |
600 |
|
Amp A - Power Output @ 4 Ohms |
800 |
|
Amp B - Power Output @ 8 Ohms (0%1"THD, 1kHz) |
600 |
|
Amp B - Power Output @ 4 Ohms |
800 |
|
Amp C - Power Output @ 8 Ohms (0%1"THD, 1kHz) |
600 |
|
Amp C - Power Output @ 4 Ohms |
800 |
|
Amp D - Power Output @ 8 Ohms (0%1"THD, 1kHz) |
600 |
|
Amp D - Power Output @ 4 Ohms |
800 |
|
THD - 1kHz (dB) |
0.1% |
|
THD - 20Hz-20kHz (dB) |
0.5& |
|
Hum and Noise (un / Aweight -dB) |
-103 |
|
Typical crosstalk -1 kHz (dB) |
less than -60
|
|
Input Impedance - Bal/Unbal (Ohms) |
22,000 / 12,000 |
|
Input Sesitivity (Vrms Sine) |
1.4 V |
|
CMRR @ 60Hz (min/typ) |
54 dB / 66 dB |
|
Max Votage Gain (dB) |
32 |
|
Power Consumption (typ/max) |
660 VA / 1800 VA |
|
Protection |
Thermal / Load / DC |
|
Cooling |
4x Variable Speed DC Fan |
|
Transformer Type |
Toroidal |
|
Finish |
Scratch Resistant Vinyl-Coated Aluminum |
|
Console Lamp Connector 12V DC (BNC) |
Yes |
|
Other Features |
Main Amp / Mon Amp Configuration Switch |
|
Dimensions (DWH, inches) |
19 x 25.8 x 5.2 |
|
Dimensions (DWH, cm) |
48.3 x 65.5 x 13.2 |
|
Weight (lbs/kg) |
48.5 / 21.9 |
|
* |
Specifications subject to change without notice |
More InfoPowerMax Series Overview
The four internal amplifiers are configured to deliver 4x 800W at 4 for mains and monitors. Not only do the PowerMAX™ mixers have extremely powerful amplifiers, but they also possess extensive, professional features at very attractive prices. Standard features include; mid-frequency sweep controls, switchable hi-pass filtering, two monitor sends, aux send, two effects sends, mute and solo switching with AFL/PFL select, stereo graphic EQ for mains, two monitor graphic EQs, a dual mode digital effects processor. Efficient cooling is via our exclusive SilentFan™ system which incorporates four 80mm variable-speed fans and ensures that the PowerMAX™ mixers do in fact stay cool.
PowerMax Series Characteristics
Other typically-Yorkville features include scratch-resistant vinyl-coated front panels, metal phone jacks, phantom power, balanced XLR, 1/4" phone and dual RCA inputs, gold plated connectors, high quality epoxy circuit boards coated with thick copper laminate and precision low-noise components. Naturally the PowerMAX™ mixers come with Yorkville's unbeatable two year, unlimited (even if you break it!) transferable warranty.*
* Warranty valid in the United States and Canada only
DetailsPowerMAX16-2 - Mixer/Amp - 3200w, 16 inputs
Yorkville has set the standard for professionally featured high powered mixing consoles with the PowerMAX PM16-2. With four integrated amplifiers delivering 3200 watts, the Yorkville PowerMAX can drive virtually any medium or large club venue for a typical band with an ample powered stereo front-of-house mix and two additional powered monitor mixes. Built for maximum flexibility, the four 800-watt amplifiers in PowerMAX mixers can be assigned in any number of useful configurations using the integrated patch bay on the top panel.
Standard professional mixer features include mid-frequency sweep controls, switchable hi-pass filtering, two monitor sends, aux send, two effects sends, mute and solo switching with AFL/PFL select, stereo graphic EQ for mains, two monitor graphic EQs, and two integrated digital effects processors.
The PowerMAX PM16-2 includes twelve mono mic/line balanced channel inputs and two stereo line level channels (13-16). Mono channels one to six feature Yorkville's group-defeatable Channel Overload Protection circuit
Warranty Information: Yorkville Tech Support 716.297.2920 (2 year unlimited and
transferable warranty) Yorkville
Website You can reach the service departments at the following
addresses: Canada & International Yorkville Sound 550 Granite Court
Pickering, Ontario Canada L1W3Y8 Phone (905)837-8481 Fax (905)839-5776 Email:
service@yorkville.com United States Yorkville Sound Inc. 4625 Witmer Industrial
Estate Niagara Falls, NY USA 14305 Phone (716)297-2920 Fax (716)297-3689 Email:
service.usa@yorkville.com
Features
- 4 x 800 watt Integrated Amplifiers
- 2 x 24bit Internal Stereo Multi-Effect Processors
- 2 x Pre-fade Auxiliary Sends (Monitors)
- 3 x Post-fade Auxiliary Sends (Effects and Aux)
- Stereo 9-band Graphic EQ (Mains)
- 2 x 9-band Mono Graphic EQ's (Monitors)
- 3-band Channel EQ's with Mid Sweep (Mic Channels)
- 4-band EQ's (Stereo Channels)
- Solo AFL/PFL & Mutes on All Input Channels
- Switchable 80Hz Hi-pass Filter on All Mic Input Channels
- Defeatable Channel Overload Protection (C.O.P.™)
- Selectable Speaker Processor Output (50/80Hz Boost)
- Top Mounted Output Patch Bay
- Global 48V Phantom Power
- Integrated Carry Handle
Specs
|
Number of Channels |
16 |
|
Channel Inserts |
7 to 12 |
|
Mono Channel EQ |
(ch.1 to 12) High, Mid, Mid Sweep, Low |
|
Stereo Channel EQ |
(ch.13 to 16) High, High Mid, Low Mid, Low |
|
Channel Effects |
All Channels |
|
Monitors Effects |
Yes |
|
Balance Controls |
13 to 16 |
|
Pan Controls |
1 to 12 |
|
Channel Overload Protection |
1 to 12 |
|
Inputs - XLR (bal) |
Ch. 1 - 12 |
|
Inputs - 1/4" |
Ch. 1 - 16 |
|
Inputs - RCA (unbal) |
2 Stereo Sets |
|
Solo Switches |
All Channels, Mon1, Mon2, EFX Returns |
|
Mute Switches |
All Channels |
|
Hi Pass Switches |
Channels 1 to 12 |
|
Activity / Solo LED |
All Channels |
|
Clip /Mute LED |
All Channels |
|
Phantom Power |
48 V + LED indicator |
|
VU Meter |
2 x 12 LEDs with Floating Peak |
|
Headphone Monitor Features |
Level, AFL/PFL Switch, 1/4 inch Stereo |
|
Internal Effects |
2 x 24 Bit stereo, 16 Effects with Parameter Pot |
|
Auxiliary Sends |
1 TRS |
|
Effects Send |
2 (1 Internal , 1 Internal/External) |
|
Effects Return |
2 stereo pairs on 1/4 inputs |
|
Effects Return to Main |
Yes |
|
Effects Return to Monitor |
Yes |
|
Reverb / Effects Footswitch |
Yes |
|
Record Outputs |
1 Stereo RCA |
|
Max Gain to Line Out -Mic Input (dB) |
72 |
|
Max Gain to Line Out -Line Input (dB) |
56 |
|
Master EQ -1 (type /Channels /Range - dB) |
Graphic / Stereo / 9 Band 63 Hz - 16,000 Hz |
|
Monitor EQ -1 (type /Channels /Range - dB) |
Graphic / Stereo / 9 Band 63 Hz - 16,000 Hz |
|
Monitor EQ -2 (type /Channels /Range - dB) |
Graphic / Stereo / 9 Band 63 Hz - 16,000 Hz |
|
Main Outputs ( Line Level) |
Amp A/B (1/4 inch TRS) |
|
Main Amp Inputs (Line Level) |
Amp A/B (1/4 inch TRS) |
|
Monitor Outputs (Line Level) |
Mon 1/2 (1/4 inch TRS) |
|
Monitor Amp Inputs (Line Level) |
Amp C/D (1/4 inch TRS) |
|
Outputs - Amp A - 1/4" Jacks |
2 |
|
Outputs - Amp A - Speakon 4-pin |
1 |
|
Outputs - Amp B - 1/4" Jacks |
2 |
|
Outputs - Amp B - Speakon 4-pin |
1 |
|
Outputs - Amp C - 1/4" Jacks |
2 |
|
Outputs - Amp C - Speakon 4-pin |
1 |
|
Outputs - Amp D - 1/4" Jacks |
2 |
|
Outputs - Amp D - Speakon 4-pin |
1 |
|
Mixer - Signal to Noise Ratio (dB) |
greater than 100 |
|
Mixer - Frequency Response (Tone and EQ Flat,+/-2dB) |
20 Hz - 20,000 Hz |
|
Mixer - Input Referred Noise to line out, @ 150 Ohms (dBv) |
-117 (@ 150 Ohms (dBv)) |
|
Mixer THD (Main out w/ -10dB input) |
less than 0.03% |
|
Amp A - Power Output @ 8 Ohms (0%1"THD, 1kHz) |
600 |
|
Amp A - Power Output @ 4 Ohms |
800 |
|
Amp B - Power Output @ 8 Ohms (0%1"THD, 1kHz) |
600 |
|
Amp B - Power Output @ 4 Ohms |
800 |
|
Amp C - Power Output @ 8 Ohms (0%1"THD, 1kHz) |
600 |
|
Amp C - Power Output @ 4 Ohms |
800 |
|
Amp D - Power Output @ 8 Ohms (0%1"THD, 1kHz) |
600 |
|
Amp D - Power Output @ 4 Ohms |
800 |
|
THD - 1kHz (dB) |
0.1% |
|
THD - 20Hz-20kHz (dB) |
0.5& |
|
Hum and Noise (un / Aweight -dB) |
-103 |
|
Typical crosstalk -1 kHz (dB) |
less than -60
|
|
Input Impedance - Bal/Unbal (Ohms) |
22,000 / 12,000 |
|
Input Sesitivity (Vrms Sine) |
1.4 V |
|
CMRR @ 60Hz (min/typ) |
54 dB / 66 dB |
|
Max Votage Gain (dB) |
32 |
|
Power Consumption (typ/max) |
660 VA / 1800 VA |
|
Protection |
Thermal / Load / DC |
|
Cooling |
4x Variable Speed DC Fan |
|
Transformer Type |
Toroidal |
|
Finish |
Scratch Resistant Vinyl-Coated Aluminum |
|
Console Lamp Connector 12V DC (BNC) |
Yes |
|
Other Features |
Main Amp / Mon Amp Configuration Switch |
|
Dimensions (DWH, inches) |
19 x 25.8 x 5.2 |
|
Dimensions (DWH, cm) |
48.3 x 65.5 x 13.2 |
|
Weight (lbs/kg) |
48.5 / 21.9 |
|
* |
Specifications subject to change without notice |
More InfoPowerMax Series Overview
The four internal amplifiers are configured to deliver 4x 800W at 4 for mains and monitors. Not only do the PowerMAX™ mixers have extremely powerful amplifiers, but they also possess extensive, professional features at very attractive prices. Standard features include; mid-frequency sweep controls, switchable hi-pass filtering, two monitor sends, aux send, two effects sends, mute and solo switching with AFL/PFL select, stereo graphic EQ for mains, two monitor graphic EQs, a dual mode digital effects processor. Efficient cooling is via our exclusive SilentFan™ system which incorporates four 80mm variable-speed fans and ensures that the PowerMAX™ mixers do in fact stay cool.
PowerMax Series Characteristics
Other typically-Yorkville features include scratch-resistant vinyl-coated front panels, metal phone jacks, phantom power, balanced XLR, 1/4" phone and dual RCA inputs, gold plated connectors, high quality epoxy circuit boards coated with thick copper laminate and precision low-noise components. Naturally the PowerMAX™ mixers come with Yorkville's unbeatable two year, unlimited (even if you break it!) transferable warranty.*
* Warranty valid in the United States and Canada only
Features
- 4 x 800 watt Integrated Amplifiers
- 2 x 24bit Internal Stereo Multi-Effect Processors
- 2 x Pre-fade Auxiliary Sends (Monitors)
- 3 x Post-fade Auxiliary Sends (Effects and Aux)
- Stereo 9-band Graphic EQ (Mains)
- 2 x 9-band Mono Graphic EQ's (Monitors)
- 3-band Channel EQ's with Mid Sweep (Mic Channels)
- 4-band EQ's (Stereo Channels)
- Solo AFL/PFL & Mutes on All Input Channels
- Switchable 80Hz Hi-pass Filter on All Mic Input Channels
- Defeatable Channel Overload Protection (C.O.P.™)
- Selectable Speaker Processor Output (50/80Hz Boost)
- Top Mounted Output Patch Bay
- Global 48V Phantom Power
- Integrated Carry Handle
Specs
|
Number of Channels |
16 |
|
Channel Inserts |
7 to 12 |
|
Mono Channel EQ |
(ch.1 to 12) High, Mid, Mid Sweep, Low |
|
Stereo Channel EQ |
(ch.13 to 16) High, High Mid, Low Mid, Low |
|
Channel Effects |
All Channels |
|
Monitors Effects |
Yes |
|
Balance Controls |
13 to 16 |
|
Pan Controls |
1 to 12 |
|
Channel Overload Protection |
1 to 12 |
|
Inputs - XLR (bal) |
Ch. 1 - 12 |
|
Inputs - 1/4" |
Ch. 1 - 16 |
|
Inputs - RCA (unbal) |
2 Stereo Sets |
|
Solo Switches |
All Channels, Mon1, Mon2, EFX Returns |
|
Mute Switches |
All Channels |
|
Hi Pass Switches |
Channels 1 to 12 |
|
Activity / Solo LED |
All Channels |
|
Clip /Mute LED |
All Channels |
|
Phantom Power |
48 V + LED indicator |
|
VU Meter |
2 x 12 LEDs with Floating Peak |
|
Headphone Monitor Features |
Level, AFL/PFL Switch, 1/4 inch Stereo |
|
Internal Effects |
2 x 24 Bit stereo, 16 Effects with Parameter Pot |
|
Auxiliary Sends |
1 TRS |
|
Effects Send |
2 (1 Internal , 1 Internal/External) |
|
Effects Return |
2 stereo pairs on 1/4 inputs |
|
Effects Return to Main |
Yes |
|
Effects Return to Monitor |
Yes |
|
Reverb / Effects Footswitch |
Yes |
|
Record Outputs |
1 Stereo RCA |
|
Max Gain to Line Out -Mic Input (dB) |
72 |
|
Max Gain to Line Out -Line Input (dB) |
56 |
|
Master EQ -1 (type /Channels /Range - dB) |
Graphic / Stereo / 9 Band 63 Hz - 16,000 Hz |
|
Monitor EQ -1 (type /Channels /Range - dB) |
Graphic / Stereo / 9 Band 63 Hz - 16,000 Hz |
|
Monitor EQ -2 (type /Channels /Range - dB) |
Graphic / Stereo / 9 Band 63 Hz - 16,000 Hz |
|
Main Outputs ( Line Level) |
Amp A/B (1/4 inch TRS) |
|
Main Amp Inputs (Line Level) |
Amp A/B (1/4 inch TRS) |
|
Monitor Outputs (Line Level) |
Mon 1/2 (1/4 inch TRS) |
|
Monitor Amp Inputs (Line Level) |
Amp C/D (1/4 inch TRS) |
|
Outputs - Amp A - 1/4" Jacks |
2 |
|
Outputs - Amp A - Speakon 4-pin |
1 |
|
Outputs - Amp B - 1/4" Jacks |
2 |
|
Outputs - Amp B - Speakon 4-pin |
1 |
|
Outputs - Amp C - 1/4" Jacks |
2 |
|
Outputs - Amp C - Speakon 4-pin |
1 |
|
Outputs - Amp D - 1/4" Jacks |
2 |
|
Outputs - Amp D - Speakon 4-pin |
1 |
|
Mixer - Signal to Noise Ratio (dB) |
greater than 100 |
|
Mixer - Frequency Response (Tone and EQ Flat,+/-2dB) |
20 Hz - 20,000 Hz |
|
Mixer - Input Referred Noise to line out, @ 150 Ohms (dBv) |
-117 (@ 150 Ohms (dBv)) |
|
Mixer THD (Main out w/ -10dB input) |
less than 0.03% |
|
Amp A - Power Output @ 8 Ohms (0%1"THD, 1kHz) |
600 |
|
Amp A - Power Output @ 4 Ohms |
800 |
|
Amp B - Power Output @ 8 Ohms (0%1"THD, 1kHz) |
600 |
|
Amp B - Power Output @ 4 Ohms |
800 |
|
Amp C - Power Output @ 8 Ohms (0%1"THD, 1kHz) |
600 |
|
Amp C - Power Output @ 4 Ohms |
800 |
|
Amp D - Power Output @ 8 Ohms (0%1"THD, 1kHz) |
600 |
|
Amp D - Power Output @ 4 Ohms |
800 |
|
THD - 1kHz (dB) |
0.1% |
|
THD - 20Hz-20kHz (dB) |
0.5& |
|
Hum and Noise (un / Aweight -dB) |
-103 |
|
Typical crosstalk -1 kHz (dB) |
less than -60
|
|
Input Impedance - Bal/Unbal (Ohms) |
22,000 / 12,000 |
|
Input Sesitivity (Vrms Sine) |
1.4 V |
|
CMRR @ 60Hz (min/typ) |
54 dB / 66 dB |
|
Max Votage Gain (dB) |
32 |
|
Power Consumption (typ/max) |
660 VA / 1800 VA |
|
Protection |
Thermal / Load / DC |
|
Cooling |
4x Variable Speed DC Fan |
|
Transformer Type |
Toroidal |
|
Finish |
Scratch Resistant Vinyl-Coated Aluminum |
|
Console Lamp Connector 12V DC (BNC) |
Yes |
|
Other Features |
Main Amp / Mon Amp Configuration Switch |
|
Dimensions (DWH, inches) |
19 x 25.8 x 5.2 |
|
Dimensions (DWH, cm) |
48.3 x 65.5 x 13.2 |
|
Weight (lbs/kg) |
48.5 / 21.9 |
|
* |
Specifications subject to change without notice |
More InfoPowerMax Series Overview
The four internal amplifiers are configured to deliver 4x 800W at 4 for mains and monitors. Not only do the PowerMAX™ mixers have extremely powerful amplifiers, but they also possess extensive, professional features at very attractive prices. Standard features include; mid-frequency sweep controls, switchable hi-pass filtering, two monitor sends, aux send, two effects sends, mute and solo switching with AFL/PFL select, stereo graphic EQ for mains, two monitor graphic EQs, a dual mode digital effects processor. Efficient cooling is via our exclusive SilentFan™ system which incorporates four 80mm variable-speed fans and ensures that the PowerMAX™ mixers do in fact stay cool.
PowerMax Series Characteristics
Other typically-Yorkville features include scratch-resistant vinyl-coated front panels, metal phone jacks, phantom power, balanced XLR, 1/4" phone and dual RCA inputs, gold plated connectors, high quality epoxy circuit boards coated with thick copper laminate and precision low-noise components. Naturally the PowerMAX™ mixers come with Yorkville's unbeatable two year, unlimited (even if you break it!) transferable warranty.*
* Warranty valid in the United States and Canada only
Sale Price: $2959.00 MSRP: $3699.00 You Save: $740.00 (20%)!
Contact Us for More Information
You might also like:
Customer Reviews:
Our Happy Customers "I just bought this amp from Musicians Buy having purchased it from Musicians Friend and had to send it back as being defefective, After 3 attempts to re buy it from Musicians Friend I chose to cancel my order with them, as I already knew the Amp and It's features I graded my replacement amp with out even seeing it. So far my treatment from Musicians Buy has been on the plus side,and believe I will continue buying my supplies from them. As a 65 year Old rocker I want to be treated correctly, Musicians Buy does that. Lou"
more...
|
Print this Page 
