Dynamic yet efficient, the TX8 is a category leader.
This seamless three-way enclosure is capable of extremely high output levels
with low distortion. The large motor 2" high frequency driver utilizes a
titanium diaphragm and is mounted on a custom 60°x40° horn that starts directly
at the driver phasing plug, thus eliminating horn throat 'squeeze'. The
proprietary ultra-light mass 8" midrange driver and wave-guide horn combination
provide loud, crystal clear reproduction throughout the entire midband.
Two low cone mass B&C 15" woofers are mounted in a quasi-horn loaded
configuration resulting in astonishing lowband efficiency. The small footprint
Baltic birch enclosure uses high rigidity bracing and incorporates an extremely
flexible top and bottom ATM Fly-Ware™ flytrack and internal bumper system for
accurate yet cost effective 'flying'.
A specific analog stereo four-way processor (TX8P) has been engineered
and is available for the TX8 to ensure maximum system performance
TX8 Specifications
|
System Type |
3-Way Trapezoid |
|
Active or Passive |
Passive |
|
Biamp Operation Only |
Yes |
|
Sensitivity (dB @1Watt/1m) |
HF:110, MF:109, LF:104 |
|
Max SPL (dB) |
134 |
|
Frequency Response (Hz +/- 3db) |
60 - 19k |
|
HF Driver(s) |
1 x 2 inch ceramic with titanium diaphragm |
|
HF Program Power (Watts) |
120 |
|
HF Impedance (Ohms) |
8 |
|
HF Horn |
Custom waveguide, phase plug coupled |
|
HF Dispersion (°H x °V) |
60 x 40 |
|
MF Driver(s) |
1 x 8 inch, cast frame |
|
MF Program Power (Watts) |
100 |
|
MF Impedance (Ohms) |
8 |
|
MF Horn |
Waveguide |
|
MF Dispersion (°H x °V) |
60 x 30 |
|
LF Driver(s) |
2 x 15 inch cast frame |
|
LF Program Power(Watts) |
800 |
|
LF Impedance(Ohms) |
4 |
|
LF Horn |
90 degree hybrid manifold |
|
Total Power (Watts) |
1020 |
|
Inputs - Speakon 4-pin |
1 (subwoofer out) |
|
Inputs - Speakon 8-pin |
2 |
|
Flying Hardware |
ATM™ top, bottom and sides |
|
Included Hardware |
17 inch flytrack, bar and quickpin slots |
|
Optional Flying Hardware |
Swivel ring, eyebolt, shackle, bar, quickpin |
|
Bar Handles |
8 |
|
Enclosure Materials |
18mm / .71 inch - 13-ply baltic birch plywood |
|
Grille |
16 gauge perforated metal |
|
Covering / Finish |
Black Ultrathane Paint |
|
Processor (optional) |
TX8P |
|
Dimensions (DWH xbackW, inches) |
23.9 x 23.9 x 50 x 11.3 |
|
Dimensions (DWH xbackW, cm) |
60.7 x 60.7 x 127 x 28.7 |
|
Weight (lbs/kg) |
216 / 98 |
YORKVILLE TX8 SPKR CAB
