X2 XDSPlus Digital Wireless System

X2 XDSPLUS Details ^top

XDS-PLUS
24-bit Digital Wireless

Pro Power to Go - Metal Chassis Stompbox Digital UHF Wireless

The XDS-PLUS is a rugged digital instrument wireless system sporting many features of the XDR Series packed into a metal chassis stompbox receiver. The result: extended frequency response and extended operating range that only an X2 can give you.

Made in the USA, the XDS-PLUS features X2’s companderless technology and dual digital transmission for the sound and feel of a direct wire connection with an incredible level of interference protection only available from X2.

FEATURES INCLUDE:
• Dual RF Diversity (anti-jamming)
• Continental Roaming
• 200’ Operating Range
• 2009 Compliant so it’s Free from FCC & DTV Concerns
• Metal Stompbox Receiver with Detachable Antenna

SYSTEM INCLUDES:
• XDT4 Digital UHF bodypack transmitter
• XDR2 Digital UHF stompbox receiver
• Instrument cable
• 9V DC Power supply included
• Users guide and all necessary batteries

X2 XDSPLUS Specs ^top

Frequency Response (± .5dB):0 Hz - 20 kHz

Audio Dynamic Range:Greater than 118 dB

Distortion:0.03% THD

Compatible Channels:Five

RF Output Power:15mw

Operating Range:200' line-of-sight (may vary due to local conditions)

Overall System Specifications

Transmission Format:X2 proprietary digital audio transmission

Frequency Response:10 Hz - 20 kHz

Audio Dynamic Range:Greater than 118 dB

Distortion:0.03% THD

RF Carrier Frequency:902 MHz to 928 MHz, FSK, dual frequency transmission

Compatible Channels:Five

RF Output Power:15mw

Audio Output Level:Unity gain with transmitter input

Polarity:Positive voltage at input yeilds positive voltage at output

Transmission Range:200 feet line-of-sight (may vary due to local conditions)

FCC Approval:Part 15 approved, no user-license required

Operating Temperature Range:–20° to +85° C (-4° to +185° F)

XDT4 Transmitter Specifications

A/D Conversion:24-bit Delta Sigma, 128 times over sampling

Input Impedance:1.2 M-ohm instrument input, 10K-ohm mic input

Connectors:1/8" Unbalanced locking connector

Controls:Power On/Off, Channel Select

Five Segment LED Display:Power On, Channel, Battery Life, Audio Level Meter

Dimensions (WxHxD):2.4 x 4 x .8" (6.09 x 10.16 x 2.03 cm)

Battery Life:9V alkaline, switching power supply, two modes:
Q-DiversityPLUS™ mode: ~5.5 hrs in (dual frequency)
Q-Diversity™ mode: ~6.5 hrs in standard (single frequency)

Weight:.25 lbs. (with 9V battery installed)

Housing:Polycarbonate, impact tested to 300 lbs.

XDR2 Receiver Specifications

D/A Conversion:24-bit Delta Sigma, 128 times over sampling

Output:2.12V RMS (Unbalanced: 1.8K Ohm)

Connectors:1/4" Unbalanced TRS output 1.8K-ohm impedance, tip= instrument voicing, ring= full bandwidth, sleeve= ground, XLR

LED Display:Power On, RF, Channel, Diversity, Battery Life, Audio Level Meter

Controls:Power On/Off, Channel UP and Down

Dimensions (WxHxD):1.44 x 4.5 x 5.65 in. (3.66 x 11.43 x 14.35 cm)

Power Requirements:9V DC 300mA via included AC/DC adapter

Weight:.8 lbs

Housing:Metal Chassis

X2 XDSPLUS Manuals ^top

XDS Plus User Guide (pdf)