TASCAM DR1 Details
The TASCAM DR-1 puts world-dominating power into your pocket. Its built-in stereo microphones include a unique variable angle mechanism, so you can set it to record from any angle. The DR-1 is the first portable recorder to include a 1GB card, so you'll have plenty of CD or MP3-quality recording time for long rehearsals and concerts.
A pair of microphones is mounted on a variable angle mechanism, which allows the recorder to record from almost any angle. The built-in stereo condenser microphones are arranged for a wide stereo image, and an external mic can also be used. The unit includes a generous 1GB SD card for hours of recording at MP3 or WAV file formats. The DR-1 also includes auto gain control and analog limiting for easy setup and a low-frequency cutoff to eliminate handling or wind noise.
Portable, Handheld Recording
Built-in High-quality Stereo Condenser Microphone
Variable Angle Microphone Mechanism with A/B Configuration
48 or 44.1kHz 24-bit Recording Resolution
MP3 and WAVE file Recording and Playback
Switchable Low Cut Filter
Analog Auto Gain Control
Analog Limiter
Rechargeable/Replaceable Lithium-Ion Battery
USB 2.0 Connection to Computer
Built-in Tuner and Vocal Cancel Features
Overdub Feature to record narration, singing or instruments over an existing recording
Special playback functions include decreasing
playback speed without changing pitch and
reducing the sound of a recorded vocal or solo
instrument during playback
Built-in effects can be applied to the input signal
Copy audio files from a computer to this unit’s SD
card by USB connection
Effects
1 RevHall Adds long reverberations that create the sound of a large hall.
2 RevRoom Adds short reverberations that create the sound of a room.
3 RevLive Adds reverberations that create a sense of distance.
4 RevStudio Adds short reverberations that create the sound of a studio.
5 RevCho Adds reverberations with a sense of sound doubling.
6 RevPit Adds reverberations with a sense of pitch change.
7 RevEnh Adds reverberations with a sense of sparkle.
8 Emphasis Emphasizes high frequencies and makes the edges of sounds clearer.
9 Detune Creates a chorus-like effect through detuning.
10 AutoPan Shifts the sound left and right automatically in the stereo field.
11 Lo-Fi Reduces the fidelity of the sound.
TASCAM DR1 Specs
Dimensions (not including protrusions):
70 (W) x 27 (H) x 135.3 (D) (mm)
2.8 (W) x 1.1 (H) x 5.3 (D) (inches)
Weight: 208 g (including battery)
MIC 2 IN input
Jack 1/4˝, mono, unbalanced
Input impedance 10 kΩ or more
Nominal input level -50 dBV
Maximum input level -34 dBV
MIC 1 IN input
Jack 3.5-mm stereo phone (with plug-in power)
Input impedance 30 kΩ
Nominal input level -64 dBV (GAIN set to HIGH)
-48 dBV (GAIN set to LOW)
Maximum input level -48 dBV (GAIN set to HIGH)
-32 dBV (GAIN set to LOW)
LINE IN input
Jack 3.5-mm phone (stereo)
Input impedance 23 kΩ
Nominal input level -10 dBV
Maximum input level +6 dBV
/LINE OUT output
Jack 3.5-mm phone (stereo)
Nominal line output -14 dBV
Maximum line output +2 dBV
Maximum headphones output 15 mW + 15 mW (with 32 Ω impedance headphones)
Frequency response (LINE IN > /LINE OUT) 20 Hz–20 kHz, +1/-3 dB
Distortion (LINE IN > /LINE OUT) 0.03% or less
S/N ratio (LINE IN > /LINE OUT) 90 dB or more
Audio file compatibility
MP3 files 32–320 kbps
44.1/48 kHz sampling frequency
VBR (playback only)
ID3 tag support up to Ver 2.4
WAV files 44.1/48 kHz sampling frequency
16/24-bit rate
Recording medium SD card (64 MB–2 GB) or SD HC card (4–32 GB)
File system FAT16/32
Physical
Lithium ion battery 3.7 V, 1800 mAh
Battery life About 7 hours when recording MP3 format with the
built-in mic (varies with operating conditions)
Power consumption 1 W (during MP3 playback)
Windows
Pentium 300 MHz or faster
128 MB or more memory
USB port (USB 2.0 recommended, 500 mA bus
power required)
Macintosh
Power PC, iMac, G3, G4 266 MHz or faster
64 MB or more memory
USB port (USB 2.0 recommended, 500 mA bus
power required)
Recomended USB host controller
Intel chipset
Supported OS
Windows 2000, XP and Vista
Mac OS X 10.2 or later