Tascam DM4800 Studio Mixer 42 Channels 24 Busses

TASCAM DM4800 Details ^top

The TASCAM DM-4800 is the ultimate digital console for professional users who demand a flexible, 64-channel mix platform that configures to fit their needs. A "fat channel" strip in the center of the board provides instant access to 4-band parametric EQ, dynamics and aux controls available for the first 48 channels. Twenty-four studio-grade mic preamps provide enough inputs for a live event, and more can be added using expansion cards with external preamps. The standard compliment of analog and digital I/O is more than you'll find on consoles costing three times as much, and a completely confi gurable 24-buss routing system allows you to re-patch the board at the flick of a switch.

TASCAM's DM4800 fits seamlessly into the modern recording environment based around a computer DAW. With a single button press, the Remote layer provides a 24-fader control surface for control of premiere workstations such as Pro Tools, Logic, SONAR, DP, Cubase and Nuendo. The optional IF-FW/DM mkII interface card provides 32 channels to and from a computer at up to 96kHz over a single FireWire cable. And the optional surround monitoring card provides downmixing, bass management and level control for mixing in up to 6.1 surround. No matter what your application, the TASCAM DM-4800 adapts to the needs of any professional audio installation.

* 48 channels and 16 returns for 64 total inputs
* 24 busses
* 12 Aux Sends
* 24 mic/line inputs with analog inserts plus phantom power for condenser mics
* 24 channels of TDIF and 8 channels of ADAT built in
* 4 expansion card slots support optional FireWire, ADAT, AES/EBU, Analog, TDIF and Surround Monitoring cards
* Dedicated cascade port supports cascade of two DM-4800s
* Channel Strip section for EQ, Dynamics and Aux control of selected channel
* Per channel LED ring encoders for pan, aux sends and EQ
* Built-in DAW control layer compatible with Pro Tools®, Logic Pro™, SONAR™, Cubase™, Nuendo™, and Digital Performer™

* Transport buttons control DAW software, RS-422 devices or MMC devices
* Powerful automation with touch-sensitive motorized faders
* 4-band EQ, compression and gating on each channel
* Compression for each aux, buss and main output
* Two built-in effects processors, each able to run TC Reverb programs
* Flexible routing allows any input to be routed to any channel or output
* Offload data to convenient Compact Flash media using built-in CF slot
* Optional MU-1000 meter bridge (as shown)
* Maximum overall dimensions (w x d x h) including rest: 36.75" x 32.4" x 9.1" (933mm x 824mm x 230mm)
* Weight: 71lbs (35kg)

Rear Panel Connections

* (24) XLR mic/line inputs with analog inserts plus phantom power for condenser mics
* (24) 1/4" TRS Analog inserts
* (24) Balanced 1/4" TRS line inputs
* (3x) 8-channel TDIF digital inputs and outputs
* 8-channel ADAT optical digital input and output
* 4 expansion card slots support optional FireWire, ADAT, AES/EBU, Analog & TDIF cards (listed below)
* (2) Stereo AES/EBU digital inputs on XLR connectors
* (2) Stereo S/PDIF digital inputs on coaxial connectors
* (2) Stereo AES/EBU digital outputs on XLR connectors
* (2) Stereo S/PDIF digital outputs on coaxial connectors
* Stereo XLR balanced line outputs
* 1/4" Stereo TRS balanced Large Monitor outputs
* 1/4" Stereo TRS balanced Small Monitor outputs

* Stereo 1/4" TRS balanced Studio outputs
* Stereo RCA 2-Track input
* (8) 1/4" TRS balanced Assignable Insert sends
* (8) 1/4" TRS balanced Assignable insert returns
* RCA Timecode input
* MIDI In, Out and Thru connectors
* BNC Word Sync Input and Out/Thru with termination
* GPI output for parallel control
* RS-422 connector for device control
* USB 1.1 connector
* 1/4" Footswitch jack
* Dedicated cascade port supports cascade of two DM-4800 mixers
* Connector for (optional) MU-1000 24-channel meter bridge

TASCAM DM4800 Specs ^top

Analog audio I/O
All specifications are given with the factory reference
level of –16dBFS.
MIC inputs (channels 1 through 24) Balanced XLR-type female connectorsa
Adjustable input level: (–60 dBu (TRIM max) to –4dBu (0dB pad))
(–40 dBu (TRIM max) to +16 dBu (–20dB pad))
Input impedance 2.2kΩ
PHANTOM (+48V) +48V phantom power. Switchable in blocks of 4 channels
(1–4, 5–8, 9–12, 13–16. 17–20, 21–24)
LINE IN (BAL) inputs (channels 1 through 24) Balanced 1/4” jacksb
Adjustable input level (–44dBu (TRIM max) to +12dBu (TRIM min))
Input impedance 10kΩ
INSERT connections (channels 1 through 24) 1/4” TRS jacksc
Send: nominal output level –2dBu, maximum output level +14dBu, impedance
100Ω
Return: nominal input level –2dBu, headroom 16dB, impedance 10kΩ
ASSIGNABLE RETURNS (BAL) (1 through 8) Balanced 1/4” jacks
Nominal input level: +4dBu
Headroom: 16dB
Input impedance: 5kΩ
ASSIGNABLE SENDS (1 through 8) Pseudo-balanced 1/4” jacks
Nominal output level: –2dBu
Maximum output level: +14dBu
Output impedance: 100Ω
2 TR IN (L/R) 2 x RCA pin jacks
Nominal input level –10dBV
Headroom: 16dB
Input impedance: 10kΩ
STEREO OUTPUT (L/R) Balanced XLR-type male connectors
Nominal output level: +4dBu
Maximum output level: +20dBu
Output impedance: 100Ω
MONITOR OUTPUTS (LARGE (BAL) &
SMALL (BAL))
Balanced 1/4” jacks (2 pairs)
Nominal output level: +4dBu
Maximum output level: +20dBu
Output impedance: 100Ω
MONITOR OUTPUTS (STUDIO) Pseudo-balanced 1/4” jacks
Nominal output level: –2dBu
Maximum output level: +14dBu
Output impedance: 100Ω
PHONES 2 x 1/4” stereo jacks
50 mW + 50 mW totald
32Ω
a. all XLR-type connectors are wired 1=ground, 2=”hot”, 3=”cold”
b. all balanced 1/4” jacks are wired sleeve=ground, ring=cold, tip=hot
c. all TRS 1/4” jacks are wired sleeve=ground, ring=return, tip=send
d. Maximum with both PHONES jacks driven at maximum

TASCAM DM4800 Documentation ^top

DM-4800 Advance Brochure

DM-4800 Effects List

DM-4800 Owner's Manual

DM-4800 Automation Guide

TASCAM DB25 analog and AES/EBU pinouts

TMCompanion Software Guide