Tannoy Reveal 5A Studio Monitor (Each)

TANNOY REVEAL5A Details

From the front:

• 40mm MDF sculpted baffle – stiff, heavy and rigid and minimises diffraction.

• Recessed drive units flush with the baffle surface – minimises diffraction.

• 10 point fixing maximises contact between drive unit and baffle.

• Bass unit development using Klippell™ analysis equipment to minimise offsets and linearise the suspension components.

• New tweeter has wide band design extending the amplitude response beyond 20kHz audibility to 30kHz to correct the phase response from 8kHz to 14kHz within the audible band. This preserves the harmonic structure of sounds and the stability of the stereo image.

• Smooth tweeter faceplate contours prevent diffraction and cavity effects.

• On/Mute (energy saving mode) via the Tannoy logo push switch.

• LED indicator shows Active/Energy Saving modes.

• Front mounted volume control for convenient Home Studio and PC/MAC laptop/desktop use.

  From the sides:

• 18mm MDF cabinet construction provides stiffness and minimises colouration.

• Internal construction braces the sides and rear of the cabinet against the rear of the bass driver to provide a rigid reactive mass for the moving cone assembly. Ensures fast tight bass response and clear midrange.

• Front baffle and rear panel tongued and grooved into the cabinet as a mechanical interlock for safety if wall mounted.

  From the rear:

• Double insulated to prevent ground loops – no safety earth required.

• CSA/CE/CCC/CB full safety approvals including China.

• Spare fuse in IEC mains connector.

• On/Off mains isolator switch.

• Substantial heat sinking for long term cool running and 24/7 reliability.

• XLR and _” jack Combi connector for balanced input.

TANNOY REVEAL5A Specs

PERFORMANCE
Frequency response (1) 65Hz to 30kHz
Max SPL (2) 109dB
Distortion <0.7%
Horizontal Dispersion (@-6dB, 10kHz horizontal) 90 degrees
DRIVE UNITS
LF/MID 130mm (5”) multi fibre paper pulp cone
WideBand™ HF 25mm (1”) soft dome, neodymium magnet system
Shielded Yes
ELECTRONIC SYSTEM
Inputs 600© balanced XLR/Jack
Sensitivity 775mV for 40W
Crossover frequency 2.7kHz
Amplifier output power LF - 40W, HF - 20W
User Controls Front panel mounted on/mute/volume/led indicator.
Power Supply Fixed mains voltage - region specific (to order) 110/220/230v
CABINET
Type Optimised bass-reflex loaded
Construction MDF cabinet and front baffle, Tongue and groove front and back
Finish Grey cabinet, Blue painted baffle
(1) +/- 3 dB , measured at 1m in an anechoic chamber. (2) Peak SPL at mix position for 1 pair driven

TANNOY REVEAL5A Documentation

Click here for Reveal Brochure (pdf)

Other views of TANNOY REVEAL5A (Click to enlarge):

Tannoy Reveal 5A Studio Monitor (Each)