Tascam CDRW402 CD Recorder

TASCAM CDRW402 Details

In one three-space rackmount unit, the CD-RW402 offers professional-quality CD burning, CD duplication and CD playback. Using the CD-RW402, you can burn CDs of your music, create as many copies as you need and playback discs via your studio's monitoring system.

With its Table Of Contents (TOC) editing features, you can use the CD-RW402 to make custom mastering adjustments for your duplicated disks with controls to join, split and remove tracks. You can also adjust the incoming volume level of both analog and digital sources, create custom fade ins/outs, and mark your indexes the way you want.

The CD-RW402's duplicator runs at 4x speed, so you can create multiple copies quickly and easily. A great selection of CD playback functions (continuous play, shuffle play, program play and more) are also included. Also, a parallel port allows for external control of the CD-RW402's most used functions. If you're looking for a great solution for CD burning, duplication and playback with all the professional features your studio needs, look no further: the CD-RW402 is here.

Record audio CDs and create 1-off CD duplicates
Multiple disc copying modes
4x duplication speed
Duplicates audio CDs and CD-ROMs using CD-R, CD-RW, CD-R-DA, and CD-RW-DA media
TOC edit function
Supports CD-Text with front-panel computer keyboard connector
Jog dials on both CD drives
Sample rate converter
±9.9% pitch control on CD player
Multiple playback functions: continuous play, shuffle play, auto cue, incremental play and more
XLR balanced and RCA unbalanced analog I/O
Coaxial and optical digital inputs and outputs
Parallel Control I/O port
Headphone jack with source select switch and level control
Includes wired remote

TASCAM CDRW402 Specs

Media type CD-R, CD-RW, CD-RDA, CD-RWDA
Frequency response 20 Hz — 20 kHz (playback ±0.8 dB)
S/N ratio > 95 dB (playback)
Dynamic range > 95 dB (playback)
Total harmonic distortion < 0.005% (playback)
Channel separation 90 dB (playback: 1 kHz)
Wow & flutter Unmeasurable (< 0.001%)
Recording media type CD-R, CD-RW, CD-RDA, CD-RWDA
Recording resolution 16-bit linear
Recording sampling frequency 44.1 kHz
Frequency convertor input 32 kHz — 48 kHz
Frequency response 20 Hz — 20 kHz (playback ±0.8 dB, recording ±1 dB)
S/N ratio > 95 dB (playback)
> 90 dB (recording)
Dynamic range > 95 dB (playback)
> 90 dB (recording)
Total harmonic distortion < 0.005% (playback)
< 0.008% (recording)
Channel separation 90 dB (playback: 1 kHz)
80 dB (recording: 1 kHz)
Wow & flutter Unmeasurable (< 0.001%)
Symptom Possible cause and remedy
10 – Specifications, etc.—Specifications
54 TASCAM CD-RW402 Owner’s Manual
Digital I/O
Analog I/O
Control
Digital inputs (drive 2 only)
COAXIAL RCA pin, IEC-60958 TYPE I, TYPE II — auto-detect
OPTICAL TOSLINK, IEC-60958 TYPE I, TYPE II — auto-detect
Digital outputs (drives 1 and 2)
COAXIAL RCA pin, IEC-60958 TYPE II (SPDIF)
OPTICAL TOSLINK, IEC-60958 TYPE II (SPDIF)
UNBALANCED LINE OUTPUTS (1, 2, COMMON)
Unbalanced RCA
Nominal output level –10 dBV (FS –16 dB)
Maximum output level +6 dBV
Output impedance 570 Ω (unbalanced)
BALANCED LINE OUTPUTS 1, 2 XLR-3 type (male) (1-gnd, 2=hot, 3=cold)
Nominal output level +4 dBu (FS –16 dB)
Maximum output level +20 dBu
Output impedance 75 Ω
UNBALANCED LINE INPUTS (2) Unbalanced RCA
Nominal input level –10 dBV (6dBV –16 dB)
Maximum input level + 6dBV
Input impedance 23 kΩ
BALANCED LINE INPUTS (2) XLR-type (female) (1-gnd, 2=hot, 3=cold)
Nominal input level +4 dBu
Maximum input level +20dBu
Input impedance 12 kΩ
PHONES output (switchable 1, 2 or COMMON) 6 mm (1/4”) stereo
Output level 20 mW + 20 mW (into 32 Ω)
CONTROL I/O D-sub 25-pin female
KEYBOARD Mini-DIN 6pin (conforms to PS/2 standard)
REMOTE IN 3.5 mm mini-jack (only for use with RC-RW402)
Writable disc formats CD-DA (including CD-TEXT), CD-ROM (IS09660), CD Extra.
When copying CD Extra discs, DISC copying allows copying of audio data, and
DAO copying allows copying of data.
10 – Specifications, etc.—Specifications
TASCAM CD-RW402 Owner’s Manual 55
General specifications
Dimensional drawing
Voltage requirements USA/Canada 120 VAC, 60 Hz
U.K./Europe 230 VAC, 50 Hz
Australia 240 VAC, 50 Hz
Power consumption 100 V — 120 V: 34 W, 220 V — 240 V: 39 W
Applicable electromagnetic environment E4
Peak inrush current 6.1 A (Pro CE)
Dimensions 483 x 138 x 301 (mm)
19 x 5.4 x 11.6 (in)
Weight 8 kg (17.6 lb.)
Operating temperature 5°C to 35°C (41°F to 95°F)
Supplied accessories RC-RW402 remote control unit
2m (6 ft.) AC cord

TASCAM CDRW402 Documentation

CD-RW402 Design Specification (pdf)

CD-RW402 Owner's Manual (pdf)

CD-RW402 Technical Documentation (pdf)

TASCAM IR Remote Controller Code List

Other views of TASCAM CDRW402 (Click to enlarge):

TASCAM CDRW402 CD RECORDER

Rear

Remote