Peavey Bandit 112 TransTube Series Amp

PEAVEY BANDIT112 Details ^top

*80 Watts (rms) into 8 Ohms
*100 Watts (rms) into 4 Ohms (w/external speaker)
*12” Blue Marvel(R) speaker
*High and Low Gain inputs
*TransTube tube emulation circuitry
*Footswitchable Clean and Lead channels
*3 band passive EQ on each channel
*3 position EQ/Gain Voicing switch on each channel
*Reverb with level control
*Footswitchable Boost with level control
*¼” stereo Speaker Simulated Direct Out jack with level control
*Footswitch optional

PEAVEY BANDIT112 Specs ^top

Power Amplifier Section:
Rated Power and Load:
Power specs measured with Power Level @ 100%
80 W RMS into 8 Ω
100 W RMS into 4 Ω
Power @ Clipping (Typically):
(1 kHz, 120 VAC line)
80 W RMS into 8 Ω
100 W RMS into 4 Ω
Frequency Response:
+0, -3 dB 100 Hz to 20 kHz @ 65 W RMS into 8 Ω
Hum and Noise:
Greater than 90 dB below rated power
Power Consumption:
(Domestic)
300 W @ 60 Hz, 120 VAC
(Export)
300 W @ 50/60 Hz, 220-230 VAC

Effects Send:
Load Impedance: 1 k Ω or greater
Nominal Output Level: -5.4
dBV, 535 mV RMS
Effects Return:
Load Impedance: High Z, 22 k Ω
Designed Input Level:
-5.4
dBV, 535 mV RMS
Boost Level @ 10:
+ 10 dB Boost
Speaker Simulated Direct Output Level @ 10:
700 mV, -3 dBv
System Hum & Noise @ Nominal Input Level:
(20 Hz to 20 kHz unweighted)
Greater than 80 dB below rated power

Equalization:
Special Low, Mid, and High passive type EQ.
Vintage/Classic/Warm switch (Clean):
Three distinct EQ voicings.
Classic/Modern/High Gain switch (Lead):
Three different EQ and Gain voicings
External Footswitch Functions:
Clean or Lead channel selection and volume Boost
Dimensions (H x W x D):
20.875" x 23.25" x 11.25"
53.02 cm x 59.06 cm x 28.58 cm
Weight:
40.9 lbs (18.55 kg)

PEAVEY BANDIT112 Manuals ^top

Bandit 112 Users Manual (pdf)

PEAVEY BANDIT112 Artists ^top