OVATION CC059 Details
Ovation CC059 Celebrity
The Ovation sound. The sound that made the acoustic guitar a viable electric
instrument is now within everyone's reach. Center-soundhole. Rosewood fingerboard.
Built by Ovation's Pacific-based subsidiary, it benefits from the same USA-made
Lyrachord body as its more upscale American brothers.
Minimal bracing = Maximum Sound
The Celebrity features A-shaped bracing that was perfected over the last few
years through a computer modeling process. This technology was once only available
in more expensive instruments.
The Celebrity Mahogany Top
Like its hue, the sound of the mahogany top Celebrity is a bit darker and moodier
than its spruce top brother.
The Celebrity Natural Finish
The Celebrity cutaway boasts almost two full octaves of fingerboard access.
CELEBRITY
Model CC059
6-String Nylon
Body Type: S/Shallow Cutaway
Top: Cedar
Bracing: Classic
Scale Length: 25 1/4
Scale:
Fretboard: Rosewood
Fret Inlay: None
Bridge: Walnut
Rosette: Oakleaf
Pickup: Thinline
Nutwidth: 1 7/8
Machines: Chrome with White Buttons
Case: 8217
OP-20 Preamp

- VOLUME: Adjusts the overall output level of the preamp.
- BASS: Increases or reduces low frequency content of the guitar's electrical
signal.
- MID: Controls the amount of a broad range of frequencies in the middle of
the sound spectrum of the guitar.
- TREBLE: Increases or reduces the high frequency content of the guitar's
electrical signal.
- EQ IN/OUT: Engages or bypasses the EQ controls.
- PRESHAPE: Engages or bypasses a fixed tone enhancement circuit.
- MID SHIFT: Moves the center frequency of the midrange control.
- TUNE/CAL: This switch turns on the built-in tuner for approximately 60 seconds.
Press a second time while playing a note and this pitch will become the calibration
point for operation (handy when tuning to an “out-of tune” instrument).
During the tuning operation the guitar output will be muted. If you finish
tuning prior to the 60 second timer returning the tuner to idle (and un-mute),
you may press this button again to manually return the preamp to normal operation.
- TUNER LEDs: These LEDs indicate the note being played and whether it’s
sharp or flat. Tune string up or down until the LED lights.
- BAT: When steadily illuminated, indicates that the battery is low and should
be changed soon. Also intermittently flashes when plug is inserted into jack
to confirm normal operation.
- RELEASE: Pressing this button will release the module from its receptacle.
Use this button to access to the battery compartment.
- MODULE: The preamp is housed within this module and mates to the receptacle
mounted in the body. Remove this module to gain access to the battery compartment.
See the illustration below for instructions on replacing the battery.
Battery Replacement

Output Connection

The 1/4" jack on all models provides an unbalanced, line-level connection
to almost any amplification system. Inserting a plug into this jack also turns
on the preamp system. Please note that the tuner is functional without connecting
a cable to this jack.