MACKIE 1402VLZPRO Details
Untitled Document Master Selection Photo
Rear panel photo
Line Input/Output photo
Studio Quality Pre-Amps in a Compact Package
The 1402-VLZ Pro is the ideal compact mixer for small home project studio owner looking for an economical solution for their audio needs. Also, because of its many features and its durability, the 1402-VLZ Pro can be used for extra studio-grade preamps as aux inputs for a larger mixing console.
- Ultra-low noise, highest headroom in its class
- 6 new precision-engineered XDR (tm) Extended Dynamic Range premium studio-grade mic preamps with:
- Ultra-wide 0-60dB gain range
- 130dB dynamic range for 24-bit, 192kHz sampling rate inputs
- +22dBu line input handling
- Distortion under 0.0007% (20Hz-20kHz)
- Advanced DC-pulse transformer RF rejection
- 60mm long-wearing log-taper faders
- 14 line inputs (6 mono, 4 stereo pairs)
- Separate RCA-type tape/CD inputs and tape outputs (unbalanced)
- 2 aux sends with 15dB of gain above Unity
- Aux 1 pre/post
- Constant-loudness pan pots
- Switchable AFL/PFL Solo
- 2 stereo aux returns with EFX to Monitor switch
- Aux 1 master with Monitor/Post assign switch
- 3-band active EQ (80Hz, 2.5kHz, 12kHz)
- 18dB/oct. 75Hz Lo Cut filter eliminates stage rumble, wind noise, P-pops and low frequency recording studio room resonances
- Extra ALT 3-4 stereo bus for submixes, separate recording, monitor and "mix minus" feeds
- Control Room/Phones multi-input source matrix
- Phantom power for premium condenser mics
- Rugged steel chassis, sealed rotary controls
- Built-in power supply --no wall wart!
SPECS:
Mic Preamp
Equivalent Input Noise (20Hz–20kHz):
150Ω –129.5dBu
50Ω –131.0dBu
0Ω –134.5dBu
Frequency Response:
–1dB 5Hz–100kHz
–3dB 3Hz–192kHz
IM Distortion (4 to 1 ratio SMPTE)
35dB gain 0.0008%
Harmonic Distortion (20Hz–20kHz)
35dB gain 0.0007%
Gain
Max +60dB
Min 0dB or Unity
Max Input +22dB
Input Impedance 1.3kΩ
Common Mode Rejection > 90dB
Common Mode Rejection Ratio > 140dB
Main Mix Noise1
Main Mix down, ch. faders down: –90.5dB
Main Mix @ unity, ch. faders down: –90.5dB
Main Mix fader @ unity, channel faders @ unity: –88.5dB
Total Harmonic Distortion (THD)2
0.005%
Attenuation (Crosstalk)3
Main fader down: –85dBu
Channel Alt 3-4/Mute switch engaged: –84dBu
Channel fader down: –83dBu
Frequency Response4
Mic input to any output
20Hz to 60kHz: +0dB/–1dB
20Hz to 100kHz: +0dB/–3dB
Maximum Levels
Mic in: +22dBu
Tape in: +16dBu
All other inputs: +22dBu
Main Mix XLR outputs: +28dBu
All other outputs: +22dBu
Impedances
Mic in: 1.3kΩ
Channel Insert return: 2.5kΩ
All other inputs: > 10kΩ
Tape out: 1.1kΩ
All other outputs: 120 ohms
EQ
High Shelving: ±15db @ 12kHz
Mid Peaking: ±12dB @ 2.5kHz
Low Shelving: ±15db @ 80Hz
Power Consumption
120VAC, 50/60Hz, 25 Watts
Physical
Weight 9.5 lbs. (4.5 kg)
Dimensions 13" x 14" x 2.9" (330mm x 356mm x 74mm)
MACKIE 1402 VLZ PRO
