JBL JRX115 Speakers

JBL JRX115 Details

JRX100 delivers the performance and prestige JBL is known for at an affordable price point. To meet these conflicting design goals, we looked at every element of the speaker system design. We kept everything that makes a speaker perform and sound its best and we eliminated things that don't. With performance, value and popular price points, we are going to be building a lot of JRX100 speakers. This means we can apply efficient, high-volume production methods and purchase materials at the lowest cost. That's how JRX100 delivers unprecedented value.

Progressive Transition™ Waveguide
Just one example of JBL's innovation is the PT™ Waveguide design. For decades, horn designers were faced with trade-offs between well controlled coverage, low distortion, and good frequency response. JBL developed proprietary algorithms which give our PT Waveguides the best performance in all three areas.

Hardware
JRX100 doesn't scrimp on the hardware either. All the JRX models use tough, non-resonant all-steel handles with big, beefy bars. And the entire baffle (not just the woofer) is protected by an 18 gauge steel grille.

JBL Drivers
All woofers and compression drivers used in JRX100 are manufactured in Northridge, California by JBL Professional.
Enclosure Construction
Competitive systems typicall y use particle board construction and rely entirely on glue to hold it together. For JRX100, we selected a more rugged and acousticall y superior 3/4" MDF material for the enclosures. And to make sure they stay together, we constructed them with advanced adhesives and closely spaced mechanical fasteners. Not only are the cabinets rugged, but the denser enclosure walls are more riged, delivering better low end as a result

SonicGuard™
Feedback, dropped microphones, pushing the amps into clipping - all these things can quickly destroy even the best high-frequency drivers. That's why JBL JRX100 speakers include SonicGuard™ protection. SonicGuard circuitry absorbs excess energy without interrupting the performance. No circuit breakers to reset, no fuses to replace and no "poly-switches" to degrade sound quality.

We've all heard shows where the sound was plenty loud and the music was kicking but there just wasn't any energy. Could be that the problem was inadequate bass. If your goal is to get the crowd out on the dance floor, there's no better way to do it than with plenty of tight, punchy, powerful bass. And there's no better way to get bass than with a JBL subwoofer.

The JRX100 line gives you two ways to get the JBL subs you need. If you prefer the simplicity and convenience of a powered subwoofer, choose the JRX118SP. Or if you'd rather have the flexibility of an externally powered rig, go with the JRX118S. Either way you're going to get the performance of a cast-frame, 18" woofer built by JBL.

Elevating your speakers on a tripod stand or pole is a great idea. But, if you raise the speaker too high, half the output hits the back wall causing unwanted acoustic effects. Leave the speaker too low, and the crowd down front gets blasted while those in the rear can't hear. The solution - a pole-mount with two sockets so you have the option of mounting your JRX115 or JRX112M with a 10º down angle. The result - more uniform coverage of your audience and less energy wasted hitting the walls. Of course you can still use the other socket to position your speakers with no down angle.

This trapezoidal, 15" speaker system is at home in live sound, dance music and speech reinforcement. It's equipped with low and high-frequency drivers built in our Northridge, California factory. Features include the Dual-Angle, 35mm pole-mount socket as well as Neutrik® Speakon® and ¼" input connectors.

Specifications
Frequency Range (-10 dB): 38 Hz - 16 kHz
Frequency Response (±3 dB): 50 Hz - 12.5 kHz
Sensitivity (1w/1m): 98 dB SPL
Nominal Impedance: 8 ohms
* Power Capacity: 250 watts
* Peak Power Capacity: 1000 watts
Recommended Amplifier Power: 250 watts to 500 watts into 8 ohms
Maximum SPL: 128 dB
Nominal Dispersion: 90º x 50º
Crossover Frequency: 1.6 kHz
Dimensions (H x W x D): 699 mm x 460 mm x 432 mm
(27.5 in x 18.1 in x 17 in)
Weight: 27.4 kg (61 lbs)
High Frequency Driver: JBL 2412 1" exit compression driver mounted on Progressive Transition™Waveguide
Low Frequency Driver: JBL M115-8A
Input Connectors: Neutrik® Speakon® NL-4 (x1); ¼" TS phone jack (x1); parallel

* "Power Capacity" and "Peak Power Capacity" ratings are based on the average and peak power capacity of product samples subjected to a 100 hour power test using random noise with a 6 dB crest factor, in accordance with IEC standards

Other views of JBL JRX115 (Click to enlarge):

JBL JRX115 Speakers (2) Package

WHIRLWIND SPKR CABLE 25' 16G 1/4 1/4