JBL E15SYSTEM Details
JBL E15System
A complete sound reinforcement system so good that no one company could build
it all. Start with a second generation of the speaker that started the
powered-speaker revolution - the JBL EON15-G2 featuring 400 watts of bi-amplified
power (300 watts for low frequencies and 100 watts for high frequencies).
The EON15-G2 is at home as a main PA speaker or as a vocal or instrument
monitor.
Then add a Soundcraft
E-8 mixer with that great British sound and features:
- 8 mono input channels
plus two stereo inputs
- 2 aux sends, each globally
switchable pre or post fader
- 100mm faders
- Internal power supply
- Simple rack mounting options
- 3 band EQ with swept mid
band
- Precision, ultra-linear
mic pre-amps
- True, professional +48V
phantom power
- Individual channel mutes
To complete the system, a
pair of AKG D2000S microphones are included. These handheld,
dynamic, hypercardiod microphones are at home in a variety of sound reinforcement
applications for speech, vocals and instruments. Rounding out the system are
four 25" XLR cables to hook it all together
JBL E15SYSTEM Specs
JBL EON15 G2 Specs:
Freq. Range (-10 dB) 39 Hz - 18 kHz
Freq. Response (±3 dB) 42 Hz - 17 kHz
Horz. Coverage (-6 dB) 90° Nominal
Vert. Coverage (-6 dB) 60° Nominal
Rated Maximum SPL 129 dB, @ 1 m (3.3 ft)
Dimensions (H x W x D) 686 mm x 430 mm x 444 mm
(27 in x 17 in x 17.5 in)
Net Weight 21 kg (46 lb)
LF Driver Integral frame with one 15"
(380 mm) driver, neodymium
magnet, 2" Differential Drive
voice coil.
HF Driver JBL 2418H-1 1" (throat diameter)
compression driver with
1.75" diameter titanium
diaphragm. Ferro-fluid cooled.
Amplifier Power LF 300 watts @ low-frequency
driver impedance.
Amplifier Power HF 100 watts @ high-frequency
driver impedance.
Input 1 Sensitivity -44 dBu to -22 dBu for rated
output (Mic/Line switch in
MIC position)
-12 dBu to +20 dBu for rated
output (Mic/Line switch in
LINE position)
Input 2 & 3 Sensitivity -18 dBu to +20 dBu for rated
output
Output Level +20 dBu (peak), Loop/Mix
switch in MIX position
Output Level +26 dBu (peak), Loop/Mix
switch in MIX position
Audio Connectors
Input 1 XLR/F, balanced
Input 2 & 3 ¼" Phone, balanced (TRS)
Loop/Mix Out XLR/M, balanced
EQ High Frequency Shelving,
±15 dB @ 5 Hz
Low Frequency Shelving,
±15 dB @ 120 Hz
Active Crossover Freq. 1.5 kHz
Limiting Low frequency amplifier controlled
by dymanic filter to
prevent amplifier overload
under extreme conditions.
AC Input 110 – 230 VAC, 50 – 60 Hz.,
175 watts rating per UL,
detachable IEC power cable.
Soundcraft E8 Mixer
Input Channels 8 Mic/Line, mono
2 Line, stereo
Aux. Sends 2, globally selectable,
pre/post
Noise (22 Hz-22 kHz measurement bandwidth)
Mic EIN @ max gain, 150Ω
source impedance -128 dBu
Mix @ max, faders down <-85 dBu
Crosstalk (typ. @ 1 kHz)
Channel mute >96 dB
Fader cut-off (rel +10 mark) >96 dB
Aux send pot offness >86 dB
Frequency Response
Mic/Line input to any output +/- 0.5 dB 20 Hz -
20 kHz
THD+ Noise
Mic gain 30 dB, -30 dBu input
Mix out, fader max @ 1 kHz <0.007%
Input & Output Impedance
Mic Input 2.4kΩ
Line Input 11kΩ
Stereo Input 100kΩ
Outputs 75Ω
Input & Output Levels
Mic Input (max. level) +17 dBu
Line Input (max. level) >30 dBu
Stereo Input (max. level) >30 dBu
Mix Input (max. level) >20 dBu
Headphones (@200Ω) 300mW
Size
Weight 6.75 kg (14.88 lb)
Dimensions (HxWxD) 87.58 mm x 426.4 mm x
400.10 mm (3.45 in x
16.79 in x 16.33 in)
Rack Mounting Requires Soundcraft
Part#P-S20001D-01
AKG D2000S Microphone
Type Dynamic microphone
Frequency Range 70 - 20,000 Hz
Polar Pattern Hypercardioid
Sensitivity @ 1000 Hz 2.0 mV/Pa (-54 dBV re
1V/Pa)
Equivalent noise level 20 dB(A) to DIN 45412
Maximum SPL for 1% (3%) THD 140 dB SPL (150 dB SPL)
Electrical impedance <500 ohms
Recommended load impedance >1200 ohms
Connector 3-pin male XLR
Finish Matte black enamel
Size
Length : 181 mm (7.13 in)
Ø: 50 mm (1.97 in)
Weight 8.1 oz (0.9 lb)
System Contents
JBL EON15 G2 Speakers 2
Soundcraft E8 Mixer 1
AKG D2000S Microphones 2
25 ft. (7.6m) XLR/M to XLR/F Cables 4
JBL EON15 G2 User Guide 1
Soundcraft E8 User Guide 1