JBL E10SYSTEM Details
Application:
The E-System 10, featuring two EON10 G2 powered
speakers, a Soundcraft E6 sound reinforcement
mixer, and two AKG D2000S dynamic hypercardioid
microphones, is a complete, integrated
sound system intended for a wide range of applications
in reinforcement of music and speech.
Key Features:
The E-System 10 is just that – a system. From the
top manufacturers in the pro audio industry, each
component has been selected to support and complement
the others.
JBL EON10 G2 Speakers
The second generation of one of the most successful
and influential professional speaker systems
ever.
10" Differential Drive™ low-frequency driver
with dual neodymium magnet for light weight
and reduced distortion.
1" JBL compression driver with titanium
diaphragm and ferro-fluid cooling.
125 watts low-frequency and 50 watts high-frequency
(bi-amplified) - actual power delivered
to the drivers.
Three inputs. One balanced mic/line selectable
input and one dual-channel, ¼" TRS phone linelevel
inputs.
Balanced loop-through/mix output. “Daisychain”
additional EON speakers or send the
mixed output to a mixing console.
60° x 90° (nominal) constant directivity horn.
Thermomaster® Total Thermal Management
System®. A single piece, cast-aluminum baffle
integrates the woofer frame, horn, and amplifier
heat sink. Air movement in the finned ports dissipates
heat - no internal or external cooling
fans are required.
Rugged, light-weight, black co-polymer
enclosure.
Integral 35 mm pole mount receptacle with
securing thumb screw.
Multi-angle enclosure for front of house or stage
monitor application.
For more low-frequency power and performance,
add the EONSUB G2 powered subwoofer or
SoundFactor SF22SP powered subwoofer.
E6 Mixer
6 mic/line input channels
2 stereo input channels
Three-band channel EQ with variable mid-frequency
for precise tailoring of the sound
Precision, ultra-linear mic pre-amps
Two auxiliary monitor or effects busses with one
pre/post selectable
True professional +48V phantom power
Smooth 100 mm faders for precise control of
your mix
Individual channel mute switches so you can
mute an input without disturbing your mix
Internal power supply
Simple rack mounting options (available as an
option)
D2000S Microphones
Rounding out the system is a pair of AKG D2000S
handheld, dynamic hypercardioid microphones.These microphones have been selected to do a
great job in a variety of applications from speech
and vocals to instrument pick up.
A complete sound reinforcement system so good
that no one company could build it all. Start with
the second generation of the speaker that started
the powered-speaker revolution - the JBL EON10
G2. Then add a Soundcraft E6 mixer with that great
British sound and wide range of features. To complete
the system, a pair of dynamic, hypercardioid
microphones from AKG - the D2000S. Rounding
out the system are four 25 ft XLR cables to hook it
all together.
JBL E10SYSTEM Specs
JBL EON10 G2
Freq. Range (-10 dB) 65 Hz - 18 kHz
Freq. Response (±3 dB) 90 Hz - 16 kHz
Horz. Coverage (-6 dB) 90° Nominal
Vert. Coverage (-6 dB) 60° Nominal
Rated Maximum SPL 117 dB, @ 1 m (3.3 ft)
Dimensions (H x W x D) 493 mm x 356 mm x 307
mm (19.4 in x 14.0 in x
12.1 in)
Net Weight 10.4 kg (23 lb)
LF Driver Integral frame with one 10"
(254 mm) driver, neodymium
magnet, 1.5" Differential
Drive voice coil.
HF Driver JBL 2412 1" (throat diameter)
compression driver
with titanium diaphragm.
Ferro-fluid cooled.
Amplifier Power LF 125 watts @ low-frequency
driver impedance.
Amplifier Power HF 50 watts @ high-frequency
driver impedance.
Input 1 Sensitivity -48 dBu to 0 dBu for rated
output (Mic/Line switch in
MIC position)
-6 dBu to +20 dBu for rated
output (Mic/Line switch in
LINE position)
Input 2 & 3 Sensitivity -12 dBu to +20 dBu for
rated output
Output Level +26 dBu (peak), Loop/Mix
switch in MIX position
Audio Connectors
Input 1 XLR/F, balanced
Input 2 & 3 ¼" Phone, dual-channel
(TRS)
Loop/Mix Out XLR/M, balanced
Active Crossover Freq. 2.7 kHz
AC Input 110 – 230 VAC, 50 – 60 Hz.,
175 watts rating per UL,
detachable IEC power
cable.
Soundcraft E6 Mixer
Input Channels 6 Mic/Line, mono
2 Line, stereo
Aux. Sends 2, globally selectable,
pre/post
Noise (22 Hz-22 kHz measurement bandwidth)
Mic EIN @ max gain, 150Ω
source impedance -128 dBu
Mix @ max, faders down <-85 dBu
Crosstalk (typ. @ 1 kHz)
Channel mute >96 dB
Fader cut-off (rel +10 mark) >96 dB
Aux send pot offness >86 dB
Frequency Response
Mic/Line input to any output +/- 0.5 dB 20 Hz -
20 kHz
THD+ Noise
Mic gain 30 dB, -30 dBu input
Mix out, fader max @ 1 kHz <0.007%
Input & Output Impedance
Mic Input 2.4kΩ
Line Input 11kΩ
Stereo Input 100kΩ
Outputs 75Ω
Input & Output Levels
Mic Input (max. level) +17 dBu
Line Input (max. level) >30 dBu
Stereo Input (max. level) >30 dBu
Mix Input (max. level) >20 dBu
Headphones (@200Ω) 300mW
Size
Weight 5.75 kg (12.68 lb)
Dimensions (HxWxD) 87.58 mm x 375.60 mm x
400.10 mm (3.45 in x
14.79 in x 16.33 in)
Rack Mounting Requires Soundcraft
Part#P-520000D-01
AKG D2000S Microphone
Type Dynamic microphone
Frequency Range 70 - 20,000 Hz
Polar Pattern Hypercardioid
Sensitivity @ 1000 Hz 2.0 mV/Pa (-54 dBV re
1V/Pa)
Equivalent noise level 20 dB(A) to DIN 45412
Maximum SPL for 1% (3%) THD 140 dB SPL (150 dB SPL)
Electrical impedance <500 ohms
Recommended load impedance >1200 ohms
Connector 3-pin male XLR
Finish Matte black enamel
Size
Length : 181 mm (7.13 in)
Ø: 50 mm (1.97 in)
Weight 8.1 oz (0.9 lb)
System Contents
JBL EON10 G2 Speakers 2
Soundcraft E6 Mixer 1
AKG D2000S Microphones 2
25 ft. (7.6m) XLR/M to XLR/F Cables 4
JBL EON10 G2 User Guide 1
Soundcraft E6 User Guide 1
JBL E10SYSTEM W/FREE....
e6
ONSTAGE SS7730B SPEAKER STAND
