Furman HR6 Headphone remote station

FURMAN HR6 Details ^top

The HR-6 is a compact 6-channel, 5-pot remote mixer that clamps to any mic stand. When used with the HDS-6, the HR-6 allows musicians to customize their own headphone or monitor mix, and the engineer doesn't have to touch the board.

The HR-6 provides 4 mono pots and one stereo pot. The 4 mono pots allow each user to create a custom mix of 4 console channels or busses. The stereo pot will most often be used for a main control room mix, or for a stereo effects return.

The HR-6 also provides a "Submixes Included/Excluded" button, which mutes the four mono pots, allowing only the stereo source to be heard, without having to alter the HR-6's 4 monaural settings.

The HDS-6/HR-6 Audio Distribution System and HR-6 Remote Mixer are designed for high-end audio applications, yet are affordable enough for home studios and general live sound applications.

Features
Every performer in a studio or live sound setting can have a personalized mix without any adjustments at the board.

Perfect for use as a headphone system in the studio, plus drives powered monitors in live sound applications.

HDS-6 rackmount audio distribution system connects to the mixer/console to provide interface and power supplies to drive a group.

HR-6 remote mixer provides each musician with 5 volume controls: 4 monaural (for mixer channels or busses), plus one for an overall stereo mix or a stereo effects return.

HDS-6 to HR-6 linking cables are included with the HR-6, as is a universal mic stand clamp.

HDS-6 provides gain trims and overload LEDs for each input, ground lift and on/off switch, and system status LEDs.

FURMAN HR6 Specs ^top

Input Impedance: 20K ohms

Sensitivity: Variable, -10 to +4 dBu for rated output (adjustable with trimpot on each input)

Power Output: 400 mW at 32 ohms (200 mW at 600 ohms, 500 mW at 100 ohms) from 20 Hz to 20 KHz

Inputs: RJ-45 jacks. Output: 1/4" stereo headphone jack

Connecting Cable: 2 each: 10Base-T UTP Ethernet computer cables, Cat. 3 or better

Distortion: 0.008% THD at full rated power at 1 KHz; 0.05% THD 20Hz to 20 KHz

Dynamic Range: Greater than 96 dB

Frequency Response: +0, -1 dB from 20 Hz to 20 KHz, 400 mW output

Power Requirement: 120 VAC, 60 Hz, 20 watts

Dimensions (H x W x D): 2.5 x 6.75 x 3.5 in.

Weight: 0.58 kg (1.25 lbs.)

FURMAN HR6 Documentation ^top

Click here for Datasheet (pdf)

FURMAN HR6 WhyFurman ^top

Who needs a Furman Conditioner?
SMP Circuit Info