Dynacord Powermate 600

DYNACORD PM600II Details

The integration of mixing console, power amplifier and effects devices in a compact and modern unit reaches a new high with the PowerMate 600. With 6 Mic/Line as well as two Stereo/Line channels, two mixable 24-bit effects devices, a 7 band master equalizer and integrated 2 x 300 W power amplifier, the PowerMate 600 is the absolute allround solution for a multitude of applications, ideally suited to the needs of both single entertainers and small bands. For schools, clubs or similar institutions, the PowerMate is the perfect tool for a wide range of sound reinforcement tasks. Safe and easy to carry, fast and simple to set up, intuitive and uncomplicated to operate, the smallest member of the PowerMate family delivers Dynacord quality in a compact, elegant frame.

All the features of a professional mixing console but without the bulk. With six Mic/Line and two Stereo/Line channels, three-band EQ in every channel, separate effects and monitor sends, a 7-band master equalizer and LED level meters in the master as well as every channel, the Power Mate 600 is a joy to use in any situation. There are other convenient features, too, such as a switchable Standby function, which allows you to feed the signal from a tape or MD recorder directly to the amplifiers without disturbing your mixer settings, as well as an additional mono output (with its own level control) to provide sound reinforcement to additional rooms and a headphone socket (also with its own level control).

pro-power
Despite its compact dimensions, the PowerMate 600 is rated at 2 x 300 watts into 4 ohms and therefore offers large dynamic reserves with exceptionally low distortion and intermodulation values. All the safety features of Dynacord’s 19” amplifiers are on board as well as the patented LPN Filter technology for ultra-powerful bass reproduction
and a superfast dynamic audio limiter, whilst the power supply offers the legendary 30% headroom.

pro-effects
Two parallel and individually controlled 24-bit stereo digital effects devices with 48-bit algorithms offer a total of 198 live-optimised presets in studio quality. User-friendly Up/Down keys are used to select between room and plate reverb, echo reverb, mono/stereo delay and a large number of other special effects. Your preferred starting presets can be stored in program mode so as to be instantly available next time you switch on the device. The return signals of both effects devices can be switched singly or jointly into or out of the signal path either at the device or using a footswitch.

DYNACORD PM600II Specs

Maximum Midband Output Power, 1 kHz, THD=1%, Dual Channel
into 4 Ohms 2 x 270 W
into 8 Ohms 2 x 180 W
Maximum Midband Output Power, 1 kHz, THD=1%, Single Channel
into 4 Ohms 2 x 340 W
into 8 Ohms 2 x 200 W
Rated Output Power, THD=0.1%, Single Channel
into 4 Ohms 2 x 300 W
into 8 Ohms 2 x 150 W
Maximum Output Voltage of power amplifier, no load 43 Vrms
THD at 1kHz, MBW=80kHz
MIC input to Main L/R output, +16 dBu, typical < 0.006%
Power amplifier input to Speaker L/R output < 0.08%
DIM 30, power amplifier < 0.03%
IMD-SMPTE, power amplifier, 60Hz, 7 kHz < 0.2%
Frequency Response, -3dB ref. 1kHz
Any input to any Mixer output 15Hz ... 60kHz
Any input to Speaker L/R output 30Hz ... 40kHz
Crosstalk, 1kHz
Fader and AUX-Send attenuation > 80 dB
Channel to channel > 70 dB
CMRR, MIC input, 1kHz > 80 dB
Input Sensitivity, all level controls in max. position
MIC input -74 dBu (155 ÌV)
LINE Input (Mono) -54 dBu (1.55 mV)
LINE Input (Stereo) -34 dBu (15.5 mV)
Power Amplifier Input +6 dBu (1.55 V)
Maximum Level, mixing desk
MIC inputs + 11 dBu
Line inputs + 30 dBu
All other inputs + 20 dBu
Record Send output + 14 dBu
All other outputs + 20 dBu
Input Impedances
MIC 1.8 kΩ
2 Track Return 10 kΩ
All other inputs > 15 kΩ
Output Impedances
Record Send 1 kΩ
Phones 47 Ω
All other outputs 75 Ω
Equivalent Input Noise,
MIC Input, A-weighted,150 Ω -130 dBu
Noise, Channel inputs to Main L/R outputs, A-weighted
Master fader down -90 dBu
Master fader 0 dB, Channel fader down -89 dBu
Master fader 0 dB, Channel fader 0 dB, Channel gain unity -83 dBu
Signal/Noise-Ratio,
power amplifier, A-weighted 105 dB
Equalization
LO Shelving ± 15 dB / 60 Hz
MID Peaking ± 15 dB / 2.4 kHz
HI Shelving ± 15 dB / 12 kHz
Master EQ, 7-band, Stereo ± 10 dB
Phantom Power
all MIC inputs +24 Vdc
Power Requirements
Factory preset, 50 Hz ... 60 kHz 100V, 120V, 230V, 240V
Power Consumption
at 1/8 maximum output power, 4Ω 450 W
Dimensions, (W xHx D), mm 455.5 x 175.8 x 340.6
Weight, including lid 13 kg
Optional
RMK-600 (Rack-Mounting-Kit PowerMate 600) 112 741
Gooseneck lamp, 12V/2.4W, 12”, XLR 112 700
FS11 (Footswitch with LED) 110 693
* Mixing desk in rated condition, Unity Gain (MIC Gain 20 dB), all faders position 0 dB, all pots in mid position, Master fader + 6dB, amplifier rated output power into 8 ohms, Dual channel, unless otherwise specified.

DYNACORD PM600II Documentation

Powermate Manual (pdf)
Powermate Brochure (pdf)

Other views of DYNACORD PM600II (Click to enlarge):

DYNACORD POWERMATE 600

AUDIO TECHNICA ATW252 HH