Community MVP35 Speaker Cab 15

COMMUNITY MVP35 Details ^top

MVP35
Click here for Owners Manual (pdf)
Click here for Brochure (pdf)
Click here for Spec Sheet (pdf)

Five-year Transferable Warranty MVP Series components are guaranteed to be free from defects in materials and workmanship for five years. This warranty is automatically transferable to any and all owners during the specified period.

Trapezoidal, carpeted, full-range, portable loudspeaker systems MVPSeries with Thermal-Link™ Protection System Community's MVP speakers provide great value, featuring good looks, low cost, versatility, ease of use, a proprietary solid state protection circuit, and HF compression drivers.

A full line of loudspeakers designed for professional musical performances, the MVP Series fulfill the sound reinforcement needs of vocalists, instrumentalists, DJs and club owners.

Thermal-Link™ High Frequency Driver Protection Every MVP full-range loudspeaker system (MVP25, 28, 35, 36, 37 and 38) employs a unique, thermallycompensated circuit to protect its high frequency compression driver. Called the Thermal-Link™ Driver Protection System, this circuit automatically adjusts the threshold of its safeguarding mechanisms to compensate for variations in driver temperature. Typically, when a driver is operated at high power levels, its temperature increases. The longer it is operated at high power, the hotter it becomes. With the increasing presence of heat, the driver's susceptibility to damage also increases. Equipped with the power to accurately sense changes in the driver's operating Temperature, Thermal-Link™ automatically adjusts the threshold of protection across the entire operating spectrum, making that threshold higher or lower as needed to insure that the driver is optimally protected against possible damage. When the protective threshold of the Thermal-Link™ circuit is reached, power to the high frequency driver is attenuated by 6 dB. After input is reduced to a safe level, the circuit automatically resets itself and restores full power. The patent-pending Thermal- Link™ protection is solid-state (there are no relay contacts or light bulbs to burn out).

Community's Low-mass High Frequency LM20™ Compression Driver Utilized in all full-range MVP Series products (including monitor systems), Community's new LM20, proprietary compression driver is outfitted with a non-metallic diaphragm to provide increased internal damping, and extremely low levels of distortion. Ferrofluid-cooled to efficiently and quickly dissipate heat, the device additionally employs a low moving mass design which provides extremely accurate transient and high frequency response.

Community's Low-mass High Frequency LM20™ Compression Driver Utilized in all full-range MVP Series products (including monitor systems), Community's new LM20, proprietary compression driver is outfitted with a non-metallic diaphragm to provide increased internal damping, and extremely low levels of distortion. Ferrofluid-cooled to efficiently and quickly dissipate heat, the device additionally employs a low moving mass design which provides extremely accurate transient and high frequency response.

Specs:
Loudspeaker Type:
Two-way, full-range

Operating Range:
65 Hz - 16 kHz
70 Hz - 14 kHz (+/-6dB)

Max Input Ratings:
200W continuous, 500W Program
40 volts RMS, 89 volts momentary peak

Recommended Power Amplifier:
For maximum SPL: 400W to 600W @ 8 Ohms

Sensitivity 1W/1m:
95 dB SPL (50 Hz - 12.5 kHz 1/3 octave bands)
94 dB SPL (250 Hz - 4 kHz speech range)

Maximum Output:
118 dB SPL / 125 dB SPL (peak)

Nominal Impedance:
8 Ohms

Min Impedance:
3.9 Ohms @ 10830 Hz

Nominal -6dB Beamwidth:
90° H (+2° / -46°, 1 kHz - 12.5 kHz)
40° V (+58° / -14°, 1 kHz - 12.5 kHz)

Axial Q / DI:
14.6 / 11.6, 1 kHz - 12.5 kHz

Crossover Frequency:
2 kHz

Recommended Signal Processing:
65Hz high pass filter

Drivers:
LF (1) 15"
HF (1) LM20™ compression driver,
non-metallic diaphragm, Ferrofluid-cooled

Driver Protection:
Thermal Link™

Input Connection:
(2) 1/4” jacks, (2) Locking Connectors
Controls:
None

Enclosure:
MDF

Enclosure Hardware:
(2) Recessed handles
(8) Interlocking corner protectors
(4) Rubber feet

Mounting / Rigging Provisions:
(1) 1-3/8” stand socket
(6) 5/16-18 hanging point inserts

Grille: 16 gauge perforated steel
Required Accessories: None
Supplied Accessories: None
Optional Accessories:
Strapkit: (3) steel straps for suspending
WB1: (2) steel plate brackets for wall mounting

Dimensions:

Height: Height: 23.8” / 606.5 mm
Width (front): Width (front): 17.5” / 445 mm
Width (rear): Width (rear): 13.1” / 333 mm
Depth: Depth: 15” / 380 mm
Weight: 46 lb. / 21 kg
Shipping Weight: 55 lb. / 24.9 kg

MVP35

The MVP35 is a rugged, high-efficiency, two-way, full-range loudspeaker
system. The system utilizes one LM20™ high-frequency driver
coupled to a Pattern Control horn and one 15" woofer for high efficiency
and excellent power handling capability. These components are
matched to an optimally tuned direct radiating bass-reflex enclosure.
The recessed handles, black carpeted exterior and injection molded corners
also make this system attractive, rugged and easily transportable.
The MVP35 offers a robust internal crossover with Thermal Link™
Dynamic HF Driver Protection. The crossover is built to last with high
quality inductors, precision wound coils and military grade circuit
boards.The proprietary Thermal Link Dynamic HF Driver Protection
circuit provides both over-current and thermal protection for added performance
and reliability.

Designed as a stand-alone full-range loudspeaker system, the MVP35
offers enough bass for most applications. For more demanding applications,
extended bass can be achieved by adding a MVP subwoofer.
Mounting is easily accomplished utilizing sthe threaded inserts provided
and optional mounting kits.