Clearsonic S52 Sober Baffle Light Grey

CLE S52 Details ^top

Pictured above: (2) S5-2L's pictured with vocalist & (1)  S4-2 pictured with trumpet player

SORBER improves the performance of the ClearSonic Panel by soaking up reflected and direct sound. This stray sound, if not absorbed, could cause the kit to sound more "roomy" than desired. The use of both ClearSonic Panels and SORBER baffles provide a complete,  cost effective solution to excessive noise problems.

ClearSonic SORBER S4-2's and S5-2's are a great tool to have in the studio, on stage, or in rehearsal for fast and portable acoustic control and separation!

All Sorber models are now available in Light Gray as an option to the original Dark Gray.

S5-2 and S4-2 SORBER Baffles
The 44-inch high model S4-2 and 66-inch high model S5-2 systems are 1.6-inches thick, 4-feet wide and fold in half for easy transport. Use two or three behind your drum kit or one behind your amplifier to absorb a significant amount of acoustic energy that would normally reflect off a back wall and back into the room.


Use free-standing S4-2 or S5-2 SORBER panels in your room corner to create a quick and effective bass trap!

SORBER Baffle Features

*EFFICIENT NOISE REDUCTION: SORBER baffles don't just redirect sound - they absorb it! SORBER's NRC ratings are greater than 90 %.

* PORTABLE: SORBER baffles are very light! The S4-2 weighs a mere 14 pounds while the S5-2 only weighs 19 pounds. Each S4-2 and S5-2 SORBER folds in half and includes a handle allowing one person to easily carry multiple units.

* FREESTANDING or TACK ABLE: Set up S4-2 or S5-2 SORBER in freestand mode and avoid messing up your walls by gluing, nailing, screwing, etc. Reconfigure your room setup quickly and easily. Also, SORBER case fabric is "Velcro receptive". If desired, SORBER can be held against a surface using standard Velcro hook. S2 SORBER squares attach to ClearSonic Panels this way.

* DURABLE: Made from a super tough carpet "trunk" cloth that can take the abuse of the road!

*AESTHETICALLY NEUTRAL:
Both the light and dark gray cloth look great from either side!

*FIRE RESISTANT: All SORBER products have a Class A fire rating.

To be considered 'Class A', a product must have a Flame Spread of less than 25 and a Smoke Developed Index rating of less than 450
SORBER products have a Flame Spread index of 0 and a Smoke Developed index of 65.
Testing was performed by Omega Point Lab using the ASTM E84 Test Standard.

NOTE: Please put your color choice of dark or light gray in the notes section