YORKVILLE NX600 Speaker 600 WRMS Super Lightweight !! FREE Speaker Stand and Cable !!

YORKVILLE NX600 Details ^top

The NX600 is the first 15-inch and horn molded loudspeaker from Yorkville Sound. This 600-watt passive box is using a new injection molded technology and features a first for composite loudspeakers, a rotatable 80º x 50º horn patterned after the custom ABS waveguide horn used in our popular élite loudspeaker line.

The unique trapezoidal shape employed on the NX600 allows the cabinet to be used as a monitor or front-of-house loudspeaker and makes it ideal for mounting in tight arrays, or in multiple cabinet clusters. The NX600 easily handles 600 watts with its Neodymium 15-inch woofer and 1 ½-inch polyester high frequency driver.

The NX600 used the same proven PTC™ (Positive Temperature Coefficient) protection on the high frequency compression driver. PTC™ is an ingenious current sensing / self-resetting breaker that offers some serious advantages over current protection schemes used in many loudspeaker cabinets. This protection scheme, while always present in the signal path, remains inaudible until it becomes necessary for it to react. It kicks in at a point where it effectively reduces output to the horn and protects that diaphragm from damage due to excessive power input or signal distortion. Unlike a breaker it does not require a physical reset to allow signal back to the horn driver, and unlike a bulb or fuse, does not need to be replaced if the circuit is tripped, and the fuse is blown.

Where PTC™ shines is in heavy feedback environments where most horn diaphragm damage occurs. In rare situations even where a microphone might be dropped in a monitor, the sustained ‘squeal’ can destroy diaphragms in seconds. PTC™ will significantly reduce output level to the horn to protect the diaphragm. When the situation has been rectified, and the feedback eliminated the horn will return to full operating level within half a second.

Features
Ultra-light injection molded Polypropylene construction
Dual purpose full range and wedge monitor format enclosure
Ultra-clear reproduction throughout bandwidth
Ultra-high efficiency performance requires less power for more output
Ultra lightweight Neodymium Woofers
High quality 1.5" High Frequency drivers (1" throat)
Next generation woofer / driver / horn technology
Rotatable 80º x 50º horn
Integrated flying hardware (3/8" threaded holes)
Tough, full length metal grille
Recessed Input panels
PTC™ HF protection system
Available in black or white (NX600W) finishes

YORKVILLE NX600 SPECS ^top

System Type 2-Way
Active or Passive Passive
Program Power (Watts) 600
Biampable No
Nominal Impedance (Ohms) 8
Sensitivity (dB @1Watt/1m) 98
Max SPL (dB) 126
Frequency Response (Hz +/- 3db) 60 - 26k
Crossover Frequency (Hz) 1300
Driver Configuration 15 inch / 1.5 inch
HF Driver(s) 1 inch Throat, Ceramic Magnet, 1.5 inch Polyester voicecoil
HF Program Power (Watts) 30
HF Horn 80 x 50
HF Protection PTC™
LF Driver(s) 15 inch Neodymium Magnet, 3 inch voicecoil
LF Program Power(Watts) 600
LF Impedance(Ohms) 8
Inputs - 1/4" Jacks 2
Inputs - Speakon 4-pin 1
Feet Yes
Optional Flying Hardware NX Flyware / Eyebolts
Bar Handles 1 (Side)
Pole Mount Adapter (1 3/8"-3.5cm) Yes
Enclosure Materials Injection molded Polypropylene
Grille Perforated Metal
Optional Covering / Finishes White (NX600W)
Other Details Side recesses for ease of lifting
Dimensions (DWH xbackW, inches) 15 x 22 x 32 x 9.5
Dimensions (DWH xbackW, cm) 38 x 56 x 84 x 24
Weight (lbs/kg) 44 / 20