TELEX FMR1000WT Details
Put note:.Handheld mic not included...... System not exactly as shown
FMR-1000 UHF
Frequency Agile Wireless Microphone System
FMR1000WT Bodypack system
Includes: (same as FMR-1000L but with No mic)
FMR-1000 950-Channel UHF Receiver
WT-1000 beltpack transmitter
rack mount hardware for single/dual mount
(2) - 1/4 wave antennas
In-line power supply cord
Applications:
Fixed Install, Rentals, Professional
medium to Large Installs 1 – 16+ Systems
Key Features:
Up to 16 systems can operate simultaneously from the pre-set channels. For more than 16 channels, Telex can help you with the coordination and channel selection.
Advanced ClearScan™, automatic group and channel selections, for quick and simple system setup.
Over 950 possible channels.
Front panel parametric equalizer with Level, Q, and Frequency controls for sound shaping without a mixing board.
Backlit LCD Display shows the Group/Channel, transmitter battery status, diversity operation, RF and Audio level meters, and space for a custom label.
Cast magnesium bodypack transmitter, and over-molded Warm-Grip™ handheld transmitter with detachable microphone elements.
Unique battery circuit means there is no way to put the battery in wrong.
Technology and the new RE 510 professional condenser element.
Patented DSP Posi-Phase™ Diversity System.
Three year warranty.
TELEX FMR1000WT Specs
FRM-1000 Receiver Specs
Controls
Front Panel: On/Off, menu, set, up, down buttons, parametric EQ
(level -12 dB to + 12 dB, Q 3.0 - 0.1,
frequency 100 - 2 kHz)
Rear Panel: 1/4 inch output level
Indicators
LCD Backlit Display: Group, channel, diversity, label, squelch,
set-up screen,transmitter battery level,
audio signal amplitude, RF signal strength.
Connectors
Back Panel: 1/4 inch unbalanced adjustable output
XLR balanced output
USB programming port
5 pin strip connector
Pin 1: Transmitter “On” TTL signal
Pin 2: Battery low TTL signal
Pin 3: Logic ground
Pin 4: Unbalanced line level audio output
Pin 5: Audio common (ground)
Antennas Detachable 1/4 wave
RF Specifications
Frequency Range: A Band 680 – 704 MHz (TV Channels 49, 50, 51, 52)
B Band 722 – 746 MHz (TV Channels 56, 57, 58, 59)
Number of Channels: 950 possible (programmable in 25kHz steps)
Diversity: DSP PosiPhase true diversity
Receiver Type: synthesized PLL agile UHF
RF Sensitivity: <0.8uV for 12 dB SINAD
FCC type acceptance: Approved under Part 15
Audio Specifications
Frequency Response: 100 – 15 kHz +/- 2 dB microphone
30 – 15 kHz +/- 2 dB instrument
Audio Output Level:
Line Level 8 mV - 0.775V RMS into a 100 k ohm load
Balanced -20 dBV max (@40kHz deviation)
Distortion: Less that 0.5% (@1kHz, 40kHz deviation)
Signal to Noise Ratio: >110 dB (A)
Dynamic Range: >100 dB
General Specifications
Power Supply: External 12 VAC 750mA in-line with cord
Size: 1.72” H x 7.50” W x 8.38” D
43.69mm H x 190.50mm W x 212.85mm D
WT-1000 Bodypack Transmitter Specs
Controls
Power on/off switch
Audio gain adjustment with 40 dB range
Transmit power switch
Microphone/Instrument switch (0, -20 dB)
Menu, set, up, down buttons
Indicators Red LED low battery indicator
LCD display (channel/group, frequency, battery level)
Battery Life 8 hours with 9V alkaline (typical)
Antenna External 1/4 wave detachable
Connector TA4M input for microphone
Pin 1 ground, pin 2 mic input
Pin 3 +5V bias, pin 4 +5V through 3k ohm
RF Output
Normal 5 mW (typical)
High 50 mW (typical)
Case Material Cast magnesium
Size 4.4 in. x 2.6 in. x .9 in.
111 mm x 66 mm x 23 mm
Telex UHF Wireless BodyPack System 
