Samson Synth Series Six DA6 Distribution Amp for UR6D Synth 6 receiver

SAMSON SWAD6 Details

The Samson DA6 (or, for “X” frequencies, DA6X) UHF Antenna Distribution Amplifier is an optional component
of the Synth Series 6 System. The DA6 allows up to four UR6D UHF receivers to share either of
two pairs of antennas. It facilitates faster, more compact setups by reducing the number of antennas
while increasing the transmission range by adding 3 dB of RF gain for a stronger, quieter signal.
Main DA6 / DA6X features include:
• Four phantom powered rear-panel antenna inputs (two for channel A and two for channel B).
• Eight rear-panel antenna outputs (four for channel A and four for channel B) which can be
connected to up to four pairs of receiver antenna inputs using the supplied BNC connector kit.
• The addition of 3 dB of RF signal gain in order to provide a stronger, quieter signal and increase the
effective transmission range.
• A front-panel power switch and power indicator LED.
• Automatically works off any AC power voltage from 100 - 240 volts.
• Rack-mountable in any standard 19" rack for portability and easy integration.
• Rugged construction for reliable operation in even the most demanding performance environments.

SAMSON SWAD6 Specs

Antenna Distribution Amplifier (DA6/DA6X):
Operating Frequencies
Standard Range 794 to 806 MHz
“X” Range 782 to 794 MHz
Antenna Inputs 4 x 50 ohms BNC connector (2 for Antenna A, 2 for Antenna B) with 9 VDC phantom power (25 mA max.)
Antenna Outputs 8 x 50 ohms BNC connector (4 for Antenna A, 4 for Antenna B)
Loss 0 dB
Noise Factor > 10 dB
Maximum Input 110 dBuV
Operating Temperature 0 to 50 degrees C
Power Rating 100V to 240V 50/60 Hz auto-sensing internal switching power supply
Power Consumption 8 - 11 W
Dimensions (W x H x D, without antennas) 479 x 44 x 213 mm (19 x 1.7 x 8.38 in.)
Weight (including antennas)

Other views of SAMSON SWAD6 (Click to enlarge):