JBL LSR6325P Monitor (Each)

JBL LSR6325P Details ^top

The compact LSR6325P provides exceptional performance for use in applications where accuracy is a must, but space is limited. With a 5.25" high-excursion woofer, a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms many larger systems. When used with the LSR6312SP Subwoofer, the LSR25P is the heart of an exceptionally accurate yet space efficient full-range system.

Key Features:

• High Performance bi-amplified design with patented JBL Transducer Technology.

• Front Panel Volume and Power Controls.

• Integrated mounting points for horizontal and vertical suspension.

• Titanium Composite High Frequency Device with Elliptical Oblate Spheroidal Waveguide.

• Shielded for use next to Video Monitors.

• Built in high pass filtering for use with optional subwoofer.

• User selectable Workstation Boundary Compensation.

JBL LSR6325P Documentation ^top

Click here for Owners Manual (pdf)

JBL LSR6325P Specs ^top

System:
Frequency Response (+1, -2 dB): 70 Hz - 20 kHz
Enclosure resonance frequency: 55 Hz
Low Frequency Extension: User controls set to default
-3 dB: 65 Hz
-6 dB: 56 Hz
-10 dB: 48 Hz
Low - High Frequency Crossover: 2.3 kHz
4th-order Electroacoustic Linkwitz-Riley
Distortion, 96 dB SPL, 1 m:
Mid-High Frequency (150 Hz - 20 kHz):
2nd Harmonic: <0.5%
3rd Harmonic: <0.5%
Low Frequency (<150 Hz):
2nd Harmonic: <2%
3rd Harmonic: <3%
Maximum SPL (90 Hz - 20 kHz): >106 dB SPL / 1m
Maximum Peak SPL (90 Hz - 20 kHz): >109 dB SPL / 1m
Signal Input: XLR, Balanced
RCA, unbalanced
Postitive voltage applied to XLR Pin 2 (RCA tip)
produces outward woofer motion.
Calibrated Input Sensitivity:
XLR, +4 dBu: 96 dB SPL / 1 m
RCA, -10 dBV: 96 dB SPL / 1 m
AC Input Voltage: 115 /230 VAC, 50/60 Hz (User Selectable)
AC Input Voltage Operating Range: +/- 15%
AC Input Connector: IEC
Long-Term Maximum System Power: 110 watts (IEC265-5)
Self Generated Noise Level: <10 dBA / 1 m
User Controls:
High Frequency Control (3 kHz - 20 kHz): +1.5 dB, 0 dB, -1.5 dB
Workstation Boundry Compensation: Active or Bypass
Low Frequency Acoustic Alignment: 36 dB/Octave Butterworth bi-pass at 40 Hz
36 dB/Octave Bessel hi-pass at 80 Hz
(For use with Subwoofer)
Variable Input Attenuation: 0 - 26 dB
Transducers:
Low Frequency Diameter: 134 mm (5.25 in)
Voice Coil: 38 mm (1.5 in)
Magnet Type: Ferrite with Integral Shielding
Cone Type: Tempered Paper with Butyl Rubber Compliance
Nominal Impedance: 8 ohm
High Frequency Diameter: 25 mm (1 in) diaphragm
Voice Coil: 25 mm (1 in)
Magnet Type: Ferrite with Integral Shielding
Diaphragm Type: Damped Titanium Composite
Other Features: Elliptical Oblate Spheroidal Waveguide
Nominal Impedance: 4 ohms
Amplifiers:
Low Frequency:
Topology: Bridged Class A-B Monolithic
Sine Wave Power Rating: 100 watts (<0.1% THD into rated impedance)
THD+N, 1/2 Power: <0.05%
High Frequency:
Topology: Class A-B, Monolithic
Sine Wave Power Rating: 50 watts (<0.1% THD into rated impedance)
THD + N, 1/2 Power: <0.05%
Physical:
Finish: Black Powdercoat
Grille: Perforated Steel
Enclosure Volume (net): 6.5 liter (0.2 cu. ft.)
Low Frequency Vent: Dual Linear Dynamic Aperture
Baffle Construction: Diecast Aluminum
Cabinet Construction: Diecast Aluminum
Mounting: 4 threaded mounting points conforming to industry standard
square pattern, 127 x 70 mm (5 x 2.75 in) 107.9 mm x
50.8 mm (4.25 x 2 in) center to center. M6 metric threads.
Net Weight: 7.7 kg (17 lb)
Dimensions (WxHxD): 17.3 x 26.9 x 24.1 cm (6.8 x 10.6 x 9.5 in)

Mounting Specifications:
The LSR6325P-1 has built-in mounting points for use with industry-standard mounting hardware.
The mounting points are located on the rear panel of the speaker system. The four threaded holes accept a 1/4" diameter machine screw with a pitch of 20 threads per-inch. The length of the screw should be a total of 3/8th inch plus the thickness of the mounting bracket.