Furman HRM16 Headphone Remote Mixer

FURMAN HRM16 Details

Furman HRM16 Headphone Remote Mixing Station

Following up on the tremendous success of our HDS-6/ HR-6 Headphone/Audio Distribution System, Furman introduces an enlarged and enhanced system, the HDS-16/HRM-16 Headphone/Audio Distribution System. The HDS-16 Headphone Distribution System and HRM-16 Personal Headphone Mixer are the logical extension to Furman's very popular headphone amp/audio distribution lineup. These models are designed to function equally well for both live (in-ear or stage monitors) and studio applications, allowing greater flexibility and ease for both the user and the engineer. The HDS-16/HRM-16 Headphone/Audio Distribution System cleanly routes 8 mono and 4 stereo signals to remote mixing locations via Centronics 50 pin cables. Up to eight HRM-16's can be connected to a single HDS-16, allowing as many as sixteen users (two per each HRM-16) to customize eight different mixes. A unique talkback system allows each user to communicate with other users and the main mixing location.

Additionally, a SOLO system allows the engineer to mute all but one stereo send from the mix location- very handy for reviewing recent takes or rough mixes. Additional HRM-16 features include local effects send/return, line out, overall bass/treble controls, talkback level, and a master level control. The double rack-space HDS-16 provides full patching functions on its front panel via 1/4" and TT input jacks, and is intended to be installed at the mixing console location. The HDS-16 provides power and signal conditioning to drive the HRM-16 Remote Mixers. There is no power cord or wall wart required for the HRM-16's. In addition, it includes two 1/4" jacks for the two-way talkback functions, and a SOLO REMOTE switch with an indicator that allows muting of all but one stereo feed at all HRM-16's. This comes in handy for isolating tracks for critical listening without having each HRM-16 user turn down all but one channel.

The SOLO function also includes a 1/4" jack so actuation can be done with a footswitch. Front panel indicators include POWER ON and SOLO ON. The rear panel includes six Centronics 50 pin connectors to link up to six HRM-16's, and the standard Furman ON/OFF and GROUND LIFT switches. The unique talkback system is extremely versatile. It can be configured two different ways by moving a jumper on the circuit board in the HDS-16. One way allows the talkback mic on each HRM-16 to be fed to all of the other HRM-16 units as well as the HDS-16. The other configuration allows communication to the HDS-16 only. This is particularly useful for stage use where the user's talkback mic should not feed into all of the monitors (including the user's own monitor). The HRM-16 Remote Mixer attaches to a mic stand with included hardware, needs no external power, and allows full volume/low distortion headphone mixes to be created on the fly. The eight mono and four stereo signals have level controls.

Each mono channel also has a pan control and an effects send control which feeds its own rear panel 1/4" send/return jacks; the affected signal is returned into the mix and controlled via a stereo effects return knob. Also on the rear panel of the HRM-16 is a mono line out 1/4" jack to drive stage or in-ear monitors, a jack for a talk-back footswitch, and two 50 pin Centronics connectors to allow daisy chaining to other HRM-16's. Connecting HDS-16 and HRM-16's is easy, as each mixer is supplied with a 25-foot super flexible interconnect cable, and can easily be extended or routed through walls and daisy chained to other HRM-16s. Cable extenders and thru-wall installation kits are available as well. The HDS-16 and HRM-16 are sold separately.

Features
Every artist in the studio or on stage can have a custom headphone/monitor mix without any adjustments at the board

Perfect for tracking, overdubbing, rehearsal sessions, and onstage monitor mixing

HDS-16 rackmount distribution system connects to the studio console and routes 8 mono and 4 stereo signals to HRM-16 remote mixing stations via a single multi-pair cable

The HRM-16 Remote Mixer attaches to a mic stand and allows headphone/monitor mixes to be created on the fly

Talkback system allows each HRM-16 mixer user to communicate with other users and the main mixing location

HDS-16 to HRM-16 linking cables are included with the units

HDS-16 provides ultra low distortion (less than .001%), high dynamic range (greater than 120dB) drive for the HRM-16's

All inputs are balanced; line outputs are balanced or single ended 25 foot Centronics cable eliminates the need for a costly console snake

Three year limited warranty

FURMAN HRM16 Specs

Inputs: Balanced, impedance 50k ohms, 90 dB CMRR

Line Outputs: Balanced or single ended, impedance 50 ohms, 68 dB OCMR

Sensitivity: +4 dBu for rated output

Power Output: 750 mW at 32 ohms; 770 mW at 100 ohms; 260 mW at 600 ohms

Distortion and Noise: Less than .002% THD, 20 Hz to 20 kHz, full rated power

Dynamic Range: Greater than 105 dB

Frequency Response: +0, -1 dB from 13 Hz to 32 kHz

Crosstalk: Less than -95 dB at 10kHz

Power Requirements: 120 VAC, 60 Hz, 82 W

Dimensions: 2.875" H x 11" x 7" D

Weight: 3.5 lbs (1.6kg)

FURMAN HRM16 WhyFurman

Who needs a Furman Conditioner?
SMP Circuit Info

Other views of FURMAN HRM16 (Click to enlarge):

Furman HRM16 Headphone Remote mbt