Crown XTI6000 XTI Series 6000 Watt Amp

CROWN XTI6000 Details ^top

Crown XTI6000 Power Amplifier

The Crown XTI6000 Power Amplifier is a rugged and lightweight power amp that offers unmatched value in its class.
Providing up to 6,000 watts into a 4 ohm bridged load and weighing in at just 24 pounds, the XTI6000 sets a new standard in high-power, lightweight amplification.

The XTI6000 also inherits all the best features from the family line, the XTI Series, including powerful integrated speaker processing and an extremely efficient universal tracking switch-mode power supply.

When you’re out with the XTI6000, you can count on having the best in music and voice reproduction with more power than ever.

Features

• Integrated proprietary DSP with LCD front panel display
• Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
• Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults
• Extremely versatile, handling a wide range of speaker impedances and outputs
• Switch-mode universal power supply
• Speaker presets for crossover frequencies, EQ, limiting, and delay
• All products fill 2U rack spaces and weigh under 24 pounds; weight sets a new standard in lightweight amps (20% less)
• Speakon and binding post outputs, XLR inputs and loop-thrus
• Comprehensive LED status per channel
• Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Crown XTI Series Power Amplifiers
The XTI Series of Crown amplifiers are professional tools designed and built for portable PA applications. XTI Series amplifiers feature an LCD screen with speaker presets for crossover frequencies, EQ, limiting, delay, and a subharmonic synthesizer. Other features include a switchmode universal power supply, useful function indicators, proportional-speed fan-assisted cooling, XLR inputs, Speakon and binding-post outputs, short-circuit protection and more.

With their powerful, reliable performance, XTI Series amps easily handle 2-ohm loads and are capable of chest-thumping lows.

CROWN XTI6000 Specs ^top

Specifications

• Output Power (1kHz Power) (With 0.5% THD):
• 2 ohm Stereo (per channel) (With 1% THD): 3,000 Watts
• 4 ohm Stereo (per channel): 2,100 Watts
• 8 ohm Stereo (per channel): 1,200 Watts
• 4 ohm Bridge-Mono (With 1% THD): 6,000 Watts
• 8 ohm Bridge-Mono: 4,200 Watts
• Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V
• Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz): +0/–1 dB
• Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted: 100 dB
• Damping Factor (8 ohm): 20 Hz to 400 Hz: > 500
• Input Stage: Input is electronically balanced and employs precision 1% resistors
• At Idle: Draws no more than 90 watts
• Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB
• Input Impedance (nominal):
• 20 kilohms balanced
• 10 kilohms unbalanced
• Load impedance (note: safe with all types of loads)
• Stereo: 2-8 ohms
• Bridge mono: 4-16 ohms
• Voltage Gain (at 1 kHz, 8 ohm rated output): 37.1 dB
• Maximum Input Signal: +22 dBu typical
• Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing)
• AC Line Voltage and Frequency Configurations Available (± 10%): 100V, 120V, 220-240V 50/60 Hz
• Ventilation: Flow-through ventilation from front to back
• Cooling: Heat sinks and proportional-speed fan
• Dimensions (W x H x D) (behind mounting surface): 19 x 3.5 x 16.2 inches (48.26 x 8.9 x 41.15 cm)
• Weight:
• Net Weight: 24 pounds (10.9 kg)
• Shipping Weight: 30 pounds (13.6 kg)

CROWN XTI6000 Comparison_Chart ^top

Click here for Comparison Chart and Amplifier Specs (pdf)