Audix DP Elite Drum Mic Pack

AUDIX DPELITE Details ^top

The DP5 is a five-piece kit which includes 1-D1 for snare, 2-D2 for rack toms, 1-D4 for floor tom, and 1-D6 for kick drum. Also included are 4 D-vice tension rim mount clips and aluminum carrying case. The DP-Elite is the ultimate drum professional drum miking package and is a seven-piece package. In addition to all the mics contained in the DP5 pack, the DP-Elite also includes the SCX1-hc condenser for high-hat, and 2- SCX1-c condensers for overheads. The combination of these seven microphones will provide an unbeatable sound

INCLUDED:

• (1) D1 Snare
• (2) D2 Toms
• (1) D4 Floor Tom
• (1) D6 Kick Drum
• (1) SCX1-hc
• (2) SCX1-c

D-series microphones have the following features:
Made in USA
CNC Machined from solid aluminum
Hypercardioid pick-up pattern provides excellent isolation
VLM (very low mass) diaphragm
Natural sound reproduction
Dent resistant spring steel grill
Ability to handle over 140 dB sound pressure levels
Black hard coat finish
Gold plated XLR
Each mic includes a sturdy pouch and unbreakable ABS mic clip

D1 Instrument Mic
Application	Snare (top or bottom), Bongos, Quinto, Hi-hat, Shekere, Guiro, Maracas
Features	Slight mid-range boost, excellent isolation
Transducer Type	Dynamic VLM Type B (Transformerless)
Frequency Response	46 Hz - 18 kHz
Polar Pattern	Hypercardioid
Output Impedance	250 Ohms
Open Circuit Sensitivity (1 Pa = 94 db SPL)	2.4 mV
Power Requirements	None
Maximum SPL	144 dB
Off-axis rejection	>30 dB
Housing	Machined Aluminum Black Hard Coat
Weight	4.5 oz/128 grams

D2 Instrument Mic
Application	Rack Toms, Floor Tom, Congas
Features	Slight mid-bass boost, excellent transient response, big sound
Transducer Type	Dynamic VLM Type B (Transformerless)
Frequency Response	44 Hz - 18 kHz
Polar Pattern	Hypercardioid
Output Impedance	250 Ohms
Open Circuit Sensitivity (1 Pa = 94 db SPL)	2.5 mV
Power Requirements	None
Maximum SPL	144 dB
Off-axis rejection	>30 dB
Housing	Machined Aluminum Black Hard Coat
Weight	4.5 oz/128 grams

D4 Instrument Mic
Application	Kick Drum, Floor Tom, Djembe
Features	Extended low end for larger drums, accurate frequency response, natural sound
Transducer Type	Dynamic VLM Type D (Transformerless)
Frequency Response	38 Hz - 19 kHz
Polar Pattern	Hypercardioid
Output Impedance	200 Ohms
Open Circuit Sensitivity (1 Pa = 94 db SPL)	2.1 mV
Power Requirements	None
Maximum SPL	144 dB
Off-axis rejection	>30 dB
Housing	Machined Aluminum Black Hard Coat
Weight	4.5 oz/128 grams

The D6 is an American-made instrument microphone designed for live and studio performance. Characterized with a cardioid pick-up pattern and a frequency response of 30 Hz-15 kHz, the D6 is an ideal choice for kick drum, bass cabs, and other instruments requiring low frequency reproduction. Transformerless design, low impedance , and balanced output allow interferencefree performance even with long cable runs. The D6, a one-piece body precision machined from solid aluminum, consists of a durable hard coat anodized finish.

Transducer Type Dynamic
Frequency Response 30 Hz - 15 kHz
Polar Pattern Cardioid
Output Impedance 200 Ohms
Sensitivity 2.2 mV @ 80Hz
Capsule Technology VLM Type E
Off Axis Rejection >20 db
Maximum SPL 144 db
Cable/Connector 3 pin gold
plated male
XLR connector
Polarity Positive voltage on pin
2 relative to pin 3 of
output XLR connector
Housing Machined Aluminum
Weight 7.7 oz / 217 grams
Finish Black Anodize

Pure detail
The Audix SCX-One system is a high quality transformerless studio condenser microphone, designed for use with any of four interchangeable capsules. The SCX-One incorporates the latest Surface Mount Technology making it compact and durable enough for years of reliable performance both in the recording studio, as well as for sound reinforcement or broadcast use. This microphone provides exceptionally flat
response and low noise, operating on standard phantom power of 48-52 volts DC.
The extended response at both ends of the spectrum and high SPL handling allows the SCX-One to be used in the most critical audio applications. Polar patterns include omni, omni-presence, cardioid, and hypercardioid. Matched pairs may be special ordered for stereo use.

SCX-hc
Hypercardioid capsule for SCX pre-amp offers exceptional directivity for noise rejection. Features 40Hz-20kHz response and 130dB SPL handling. Gold leaf construction, gold contact and brass housing.

SCX-c
Cardioid capsule for SCX pre-amp is ideal for directional recording or sound reinforcement.Features 40Hz-20kHz response and 130dB SPL handling. Gold leaf construction, gold contact and brass housing.