Allen & Heath WZ3Mon Mix Wizard

12 Bus Outputs
12 Bus outputs may be used in mono or stereo pairs for sending audio to stage and personal monitor systems.

16 Inputs
16 inputs feature an XLR-female input, XLR-male Split output and 1/4" TRS insert.

Split Outputs
The Split outputs are direct outputs that are used to send signal to other consoles, recorders, etc.

Rotating Connector Section
A rotating connector section allows the Mix Wizard to be mounted into a standard 19-inch rack.

16 Mono Mic/Line inputs
12 Mix Outputs
Mix Outputs are switchable to
stereo pairs
Passive Microphone Splitter
Individual Phonton Power
Direct outs on all mono channels
Crystal-Clear WZ3 Mic Preamps
Desktop or Rackmount
Redundant PSU Optional
4-Band Overlapping EQ
Mute Switch, PFL on each input

Total # Of Inputs 16

Mic/Line Inputs 16 - XLR 3-pin Line/Mic inputs
16 - 1/4" TRS Phone Inserts

Stereo Line Inputs No

In-Line Inputs/Returns No

AUX Sends No

AUX Returns No

Inserts 16 - 1/4" TRS Phone Inserts (Mono Channels)
12 - 1/4" TRS Phone Inserts (Bus Outputs)

BUS (Group) Outputs 12 - XLR Outputs

2 Trk Master I/O No

ALT I/O Split Outputs - 3-pin XLR-male x16

Monitor Outputs Stereo XLR
Stereo 1/4" Phone

EQ Section Mono EQ:
HF Shelving, +/- 15dB, 12kHz
HM Peak/Dip, +/- 15dB, 500Hz to 15kHz, Q=1.8
LM Peak/Dip, +/- 15dB, 35Hz to 1kHz, Q=1.8
LF Shelving, +/- 15dB, 80Hz

Stereo EQ:
HF Shelving, +/- 15dB, 12kHz
HM Peak/Dip, +/- 15dB, 2.5kHz, Q=1.8
LM Peak/Dip, +/- 15dB, 250kHz, Q=1.8
LF Shelving, +/- 15dB, 80Hz

Channel HPF - 12dB/octave below 80Hz

Solo/Mute Mute - ch's 1-16

Channel Level Control Rotary Controls (Channels)
Fader Controls (Bus Outputs)

Trim/Gain Control 50dB range from +10 to +60dB (mic), -10 to +40dB (line, pad)

Phantom Power +48 volt

Metering 3 color LED, quasi peak response
Master: 12 segment -30 to +16dB
Channel: 2 segment -12, +16dB (5dB before clip)

Frequency Response 20Hz to 50kHz +/- 0.5dB

Dynamic Range Internal Headroom:
Channels +21dB
Mix +23dB

Signal-to-Noise Ratio rms 22Hz to 22kHz Mic EIN -128dB
Residual Output Noise < -95dBu (-99dB S/N)
L/R unity fader mix noise < -83dBu (-87dB S/N)

Total Harmonic Distortion (THD) @ +10dBu 1kHz
Channel to mix out < 0.004%

Power Supply Internal 100-240V, 50/60Hz auto sensing, IEC input
External input for optional MPS12 backup supply
Power Consumption 35W max
Main fuse T630mA L 20mm


W-19" x H-17.7" (10U) x D-5", 22lbs