Yamaha's audio engineers have designed the new P-Series Power Amplifiers as perfect mates to the popular Club Series loudspeakers. To achieve this, they provided them with big power output that matches the power handling capabilities of the Club Series Speakers, and equipped them with YS Processing (Yamaha Speaker Processing) to deliver a signal that is tuned to the needs of these loudspeakers.
Further matching is found in Yamaha's proprietary YS Processing. Each model is equipped with this specially designed circuit that delivers output tailored to the specific response of the Club Series speakers for superior audio quality and performance. All models feature both XLR and 1/4-inch TRS inputs and Neutrik Speakon, phone plug, and 5-way binding post outputs to make connections quick and easy.
Other features include Yamaha's exclusive EEEngine technology
which delivers high performance with exceptional efficiency, sweepable high and low pass filters for optimizing output to any loudspeakers, compact and durable 2U chassis, and variable speed cooling fans.
Big Output Power Delivered with Great Efficiency
The new P-Series Power Amplifiers deliver a robust amount of professionalquality power in a wide range of configurations designed to suit most any need. In a 4- ohm bridged application, the P7000S delivers 3200 watts, the P5000S delivers 2600 watts, the P3500S 2000 watts, and the P2500S 1300 watts.
Those on a budget will find the lineup's high power output and affordable prices deliver higher quality without putting a strain on funds. Further savings are realized with extremely efficient operation utilizing Yamaha's exclusive EEEngine technology which keeps operational costs down by significantly reducing AC power consumption and heat generation.
The Perfect Match with Your Club Speakers
The new P-Series Power Amplifiers can be used with any loudspeaker system, but if you're using our Club Series, they will provide power and performance tailored to deliver maximum performance from your system. In an 8-ohm stereo application power output per channel on the P7000S is 700 watts, the P5000S 500 watts, the P3500S 350 watts, and the P2500S 250 watts. This wide selection lets you choose the amplifier that best matches the power handling capabilities of your speaker system.
All four models are equipped with independent sweepable high and low pass filters on each channel so you can optimize output for subwoofer or full range systems to provide peak audio quality and performance from any speaker system you may be using.
Light Weight Keeps Transport and Setup Easy
Look at the specifications and you'll notice that the P2500S and P3500S are respectably light in weight making transport and setup less strenuous. What's amazing though, is the comparison in weight per watt when you look at the P5000S and P7000S. The use of a switching power supply makes these two models very lightweight while maintaining superior audio quality.
Flexible Connectivity
To provide the most flexible connectivity possible, all four models are equipped Neutrik Speakon™ output jacks, and 1/4-inch output jacks for each channel in addition to 5-way binding post. Channel inputs consist of both XLR and 1/4-inch TRS jacks.
* Speakon is the registered trademark of Neutrik AG.
Other Features
The new P-Series' industrial design delivers a refined and impressive look with deep blue faceplates bordered in silver trim, handles, and mounts. The chassis is specially designed to provide added durability and strength. Continuously variable-speed fans mounted internally on either side of the front panel offer quiet, efficient cooling. Comprehensive protection consists of power on/off muting, DC detection, thermal protection, current limiting, and a protective cover for the attenuators is also supplied.
EEEngine
EEEngine (Energy Efficient Engine) Technology makes more efficient use of AC power by reducing power consumption and heat generation without degrading output power or sound quality. When power requirements are low, the system uses a highly efficient current buffer to transparently switch input power on and off as needed. As power requirements increase, an independently responding auxiliary power line supplies additional power as required. Output isn't compromised, as the auxiliary power line is driven by the power supply voltage, which maintains maximum output to the speaker load.
YS Processing
With YS Processing (Yamaha Speaker Processing), you get direct compatibility with our popular Club Series loudspeaker systems. This special circuit optimizes output from the power amplifier to match the characteristics of Club Series speaker systems delivering a signal that is precisely what the speaker requires. With the YS Processing system, extra-smooth highs and enhanced lowfrequency from your Club Series loudspeaker system is assured.
Models
P7000S
P5000S
P3500S
P2500S
Output Power
1kHz, THD+N=1%
8 O /STEREO
750W+750W
525W+525W
390W+390W
275W+275W
1kHz, THD+N=1%
4 O /STEREO
1100W+1100W
750W+750W
590W+590W
390W+390W
1kHz, THD+N=1%
8 O /BRIDGE
2000W
1500W
1180W
780W
20-20kHz, THD+N=0.1%
8 O /STEREO
700W+700W
500W+500W
350W+350W
250W+250W
20-20kHz, THD+N=0.1%
4 O /STEREO
950W+950W
700W+700W
450W+450W
310W+310W
20-20kHz, THD+N=0.1%
8 O /BRIDGE
1900W
1400W
900W
620W
1KHz, 20mS nonclip
2 O /STEREO
1600W+1600W
1300W+1300W
1000W+1000W
650W+650W
1KHz, 20mS nonclip
4 O /BRIDGE
3200W
2600W
2000W
1300W
Power Bandwidth
halfpower
10Hz-40kHz (THD+N=0.5%)
THD+N
20Hz-20kHz, half power
= 0.1%
Intermodulation Distortion
60Hz: 7kHz, 4:1, half power
= 0.1%
Frequency Response
Po=1W RL=8 O
0dB, +0.5dB, – 1dB f=20Hz-50kHz
Channel Separation
half power
RL=8 O
= 70dB 1kHz
Att.max
input 600 O shunt
Residual noise Att. min
DIN AUDIO
= 70dB
S/N ratio
DIN AUDIO
104dB
103dB
102dB
100dB
Damping Factor
RL=8 O
1KHz
= 350
= 200
Sensitivity @8 O
Att.max
+8dB
+6dB
+4dB
+3dB
Voltage Gain
Att.max
32.1dB
Input Impedance
30K O
(balance) 15k O
(unbalance)
Controls
Front Panel
POWER switch (push on/push off) attenuator (31position) x 2
Rear Panel
MODE switch (STEREO/BRIDGE/PARALLEL) FILTER switch (SUB WOOFER/LOW CUT/OFF) x 2 FREQ.CONTROL (25Hz-150Hz) x 2 YAMAHA SPEAKER PROCESSING switch (ON/OFF )
Connectors
Input
XLR-3-31 type/ch 1/4" TRS/ch
Output
SPEAKON, 5way biding post, 1/4" phone/ch
Indicators
POWER
x 1 (Green)
PROTECTION
x 1 (Red)
TEMP
x 1 (Red) heatsink temp = 85 o C
YS PROCESSING
x 1 (Yellow)
SIGNAL
x 2 (Green)
CLIP
x 2 (Red)
Load Protection
POWER switch on/off mute DC-fault power supply shutdown (P7000S/5000S) DC-fault power output cut (P3500S/2500S)
Amplifier Protection
Thermal (heatsink temp = 90 o C) VI limitter (RL=1 O )
Limitter Circuit
comp. :THD = 0.5%
Cooling
Dual variable-speed fan / Single variable-speed fan
3900 Fiscal Ct, Suite 200
West Palm Beach
Florida 33404
USA
Telephone:1-877-778-7845 Toll Free
or 561-842-7451 Fax: 561-840-9032E-mail Us! Hours: Mon-Fri 10 am -7 pm EST, Sat 10 am -5 pm EST
YAMAHA P7000S POWER AMPLIFIER 
YORKVILLE SPEAKER CABLE SP-SP 25'
WHIRLWIND DI BOX
