X2 XDSPLUS Details
XDS-PLUS
24-bit Digital Wireless
Pro Power to Go - Metal Chassis Stompbox Digital UHF Wireless
The XDS-PLUS is a rugged digital instrument wireless system sporting many features of the XDR Series packed into a metal chassis stompbox receiver. The result: extended frequency response and extended operating range that only an X2 can give you.
Made in the USA, the XDS-PLUS features X2’s companderless technology and dual digital transmission for the sound and feel of a direct wire connection with an incredible level of interference protection only available from X2.
FEATURES INCLUDE:
• Dual RF Diversity (anti-jamming)
• Continental Roaming
• 200’ Operating Range
• 2009 Compliant so it’s Free from FCC & DTV Concerns
• Metal Stompbox Receiver with Detachable Antenna
SYSTEM INCLUDES:
• XDT4 Digital UHF bodypack transmitter
• XDR2 Digital UHF stompbox receiver
• Instrument cable
• 9V DC Power supply included
• Users guide and all necessary batteries
X2 XDSPLUS Specs
Frequency Response (± .5dB):0 Hz - 20 kHz
Audio Dynamic Range:Greater than 118 dB
Distortion:0.03% THD
Compatible Channels:Five
RF Output Power:15mw
Operating Range:200' line-of-sight (may vary due to local conditions)
Overall System Specifications
Transmission Format:X2 proprietary digital audio transmission
Frequency Response:10 Hz - 20 kHz
Audio Dynamic Range:Greater than 118 dB
Distortion:0.03% THD
RF Carrier Frequency:902 MHz to 928 MHz, FSK, dual frequency transmission
Compatible Channels:Five
RF Output Power:15mw
Audio Output Level:Unity gain with transmitter input
Polarity:Positive voltage at input yeilds positive voltage at output
Transmission Range:200 feet line-of-sight (may vary due to local conditions)
FCC Approval:Part 15 approved, no user-license required
Operating Temperature Range:–20° to +85° C (-4° to +185° F)
XDT4 Transmitter Specifications
A/D Conversion:24-bit Delta Sigma, 128 times over sampling
Input Impedance:1.2 M-ohm instrument input, 10K-ohm mic input
Connectors:1/8" Unbalanced locking connector
Controls:Power On/Off, Channel Select
Five Segment LED Display:Power On, Channel, Battery Life, Audio Level Meter
Dimensions (WxHxD):2.4 x 4 x .8" (6.09 x 10.16 x 2.03 cm)
Battery Life:9V alkaline, switching power supply, two modes:
Q-DiversityPLUS™ mode: ~5.5 hrs in (dual frequency)
Q-Diversity™ mode: ~6.5 hrs in standard (single frequency)
Weight:.25 lbs. (with 9V battery installed)
Housing:Polycarbonate, impact tested to 300 lbs.
XDR2 Receiver Specifications
D/A Conversion:24-bit Delta Sigma, 128 times over sampling
Output:2.12V RMS (Unbalanced: 1.8K Ohm)
Connectors:1/4" Unbalanced TRS output 1.8K-ohm impedance, tip= instrument voicing, ring= full bandwidth, sleeve= ground, XLR
LED Display:Power On, RF, Channel, Diversity, Battery Life, Audio Level Meter
Controls:Power On/Off, Channel UP and Down
Dimensions (WxHxD):1.44 x 4.5 x 5.65 in. (3.66 x 11.43 x 14.35 cm)
Power Requirements:9V DC 300mA via included AC/DC adapter
Weight:.8 lbs
Housing:Metal Chassis