TANNOY ELLIPSE 10 Details
A fully time-aligned, 3-way active system utilising Dual Concentric™ plus SuperTweeter™ drive units, the Ellipse 10 has a frequency response extending to above 50kHz for monitoring of wideband programme material.
Ninety degree horizontal dispersion gives you a wide sweet spot for practical working across the console, while analogue signal processing achieves an exceptionally flat frequency response in use.
Discrete MOSFET power amplifiers, with generous power supply, provide more than ample power with extremely low noise and distortion.
The unique cabinet shape not only has a striking appearance but is inherently stiff. Constructed of laminated birch with a massive MDF baffle and rear panel, the enclosure is non-resonant acoustically and mechanically.
TANNOY ELLIPSE 10 Specs
PERFORMANCE
Frequency response 30Hz - 50kHz
Maximum SPL (pair @ 1m) 114dB (anechoic)
Typical max SPL (pair @ mix position) 118dB
Distortion <0.5%
DRIVE UNITS
Driver type 254mm (10") Tannoy Dual Concentric¢â
SuperTweeter¢â 25mm (1") Wideband¢â SuperTweeter¢â
Dispersion 90 degrees horizontal (@6dB)
ELECTRONIC SYSTEMS
Amplifier Inputs 22k§Ù balanced via XLR
Input sensitivity +4dBu to -10dBu continuous
Power rating LF: 200W, HF: 200W, ST: 30W
Signal/Noise Ratio >100dB
Multi-function LED indicator Green for: System on, Red for: Stabilisation pior to system on. Fault (such as DC), thermal trip, clipping of LF amplifier, Yellow for: VLF warning (presence of subsonic signals below 20Hz, increasing in sensitivity down to 1Hz)
Trim Controls Hi: Shelving filter +/-3dB @ 25kHz (+/-1dB @ 4.5kHz), Mid: Bell filter +/-2dB @ 1.4kHz - 0.45Q, Low: Variable alignment LF hi-pass filter +/-3dB @ 45 Hz (+/-1dB @ 90Hz)
CROSSOVER
Frequency 1.7 kHz - 14 kHz
CONSTRUCTION
Enclosure type Laminated birch, reflex ported
Volume 32.6 Litres
Dimensions 423mm x 540mm x 380mm (16 5/8 x 21 1/4 x 15")
Mains voltage 100 - 120 V / 220 - 240 V 50 - 60 Hz
Mains fuse T2.5A 250 V, T5.0A 125 V
Weight 21kg (46.2lbs)
Finish Grey suede paint (black on SuperTweeter)
Front baffle panel MDF