Studio Projects CS5 LD Multi-Pattern Condenser Bottle Mic

STUDIOPROJECTS CS5 Details

The Studio Projects CS5 is an externally polarized five pattern pressure gradient transducer microphones with FET impedance converter. The capsule is a 1.06” (27mm) capsule, with a diaphragm thinkness of 6µm. It features five selectable polar patterns, four selectable pads, four high pass filters, and four low pass filters for added control in various recording applications and a clear, full response expected from a large capsule microphone design.

Versatility is key in the recording arena, and the Studio Projects CS5 is well equiped to handle any recording application. It is designed to deliver the finest quality vocal and instrumental recordings and will serve to enhance any professional or project studio.

As a result of uncompromising dedication and advanced production capabilities, Studio Projects will continue to broaden the range of quality pro audio microphones & electronics for today's recording environment.

Features

• Pressure-Gradient Transducer: 1.06" (27mm) 6um mylar diaphragm
• FET impedance converter
• Five Polar Patterns: Cardioid, Wide Cardioid, Hyper Cardioid, Omni, Fig 8
• -5dB, -10dB, -15dB, and -20dB Pads
• 50hZ, 75hZ, 150Hz, and 300hZ High Pass Filters @ 6dB/octave
• 15kHz, 7kHz, 5kHz, and 3kHz, Low Pass Filters @ 6dB/octave

Applications

• Close miking of instruments with high sound pressure levels
• Announcer’s mic for broadcasting/dubbing
• Home recording and project studios
• Vocalist recording
• Spot mic for: wind instruments, strings, percussion and guitar amps
• XY - Coincident Cardioids
• Mid-Side Method
• Stereosonic Technique (Blumlein)
• Overheads

Included Accessories

• Shockmount
• Foam wind screen
• Case

STUDIOPROJECTS CS5 Specs

CS5 Specifications

Type:

Pressure gradient transducer microphone
Polar patterns:

Cardioid, Wide Cardioid, Hyper Cardioid, Omni, and Figure of 8
Frequency response:

20~20000Hz.
Sensitivity:

14mV/Pa=-32dB(0dB=1V/Pa)
Output impedance:

200 Ohm
Load impedance:

1000 Ohm
Maximum SPL:
136 dB SPL for 1% THD @1000Hz (0dB SPL=0.00002Pa) 156dB with -20dB preattnuation
Equivalent Noise Level:
13dB-A
S/N:
81 dB-A
Power requirement:
48 +/- 4V.
Current consumption:
4mA
Circuit:
JFET impedance converter, discrete balanced output.
Connector:
Gold-plated 3-pin XLR
Size:
dia: 2"(52mm) length: 8.5"(215mm)
Pads:
-5dB, -10dB, -15dB, and -20dB selectable
High Pass Filters :
50hZ, 75hZ, 150Hz, and 300hZ 6dB/Octave
Low Pass Filters:
15kHz, 7kHz, 5kHz, and 3kHz 6dB/Octave

Other views of STUDIOPROJECTS CS5 (Click to enlarge):

Studio Projects CS5 LD Multi-Pattern

MONSTER 30' MIC CABLE XLR