SWR REDHEAD Details
Welcome to the party! 2008 marks the twentieth anniversary of a love affair between bassists and the most influential (and most imitated) bass combo amplifier in history – the SWR Redhead. The original Redhead revolutionized bass guitar amplification by combining SWR’s crystal-clear full-range tube preamp with a robust solid-state power platform into a rock solid, yet easily portable 2X10 cabinet. Loaded with two state-of-the-art 10” speakers and a high frequency horn, the Redhead sounded simply phenomenal and offered unprecedented patching options designed to meet the needs of discerning bassists, whether playing live or in the studio. Twenty years later, its features are far more than just relevant – they remain industry standards.
In celebration of this 20th anniversary, SWR once again raises the bar, and introduces the newly redesigned Redhead bass amplifier. Embodying more than just a face lift, the new Redhead design incorporates innovative and attractive new features that will make you fall in love all over again.
FEATURES:
• 400 watts (650 watts w/ 4Ω extension cabinet)
• 2X10” cabinet featuring upgraded Eminence® drivers and a Foster® horn
• All-tube studio-quality Direct Out w/ front panel controls including ground lift, level pad and mute
• Classic SWR preamp w/ Aural Enhancer™
• 3-band active EQ w/ variable midrange, pull turbo (ultra-low) and transparency (ultra-high) controls
• SWR compressor circuit
• Internal speaker on/off switch
• Stereo headphone output for monitoring or practice
• Tuning Mute
• Side-chain effects loop w/ Blend control
• Single empty rack space for tuner or effects unit
• Protective steel-reinforced front cover (doubles as tilt-back stand)
• Removable casters
• 5-year transferable limited electronic warranty
SWR REDHEAD Specs
Model Name Redhead™
Model Number 44-20100-010 (120V US)
Series Professional Combo Series
Type Bass Combo Amplifier
Description 400 watt, 2x10 + tweeter combo amplifier packed with professional features and a built in rackspace for the effects unit of your choice. Comes standard with caster wheels and a front cover that doubles as a stand. In celebration of the 20th anniversary of the introduction of the Redhead™ combo, this often copied, but never duplicated amplifier has been upgraded and updated.
Features Two 10" Eminence speakers
Foster horn
SWR® preamp with Aural Enhancer™
Tube Direct Out with front panel controls
Compressor circuit
3-band active EQ
"Pull Turbo" bass boost
"Pull Transparency" high end expansion
Side-chain effects loop with Blend control
Tuner Out
FRONT PANEL:
Tuning Mute
Internal Speaker Defeat switch
Tube Direct Out Mute
Steel reinforced front cover/tilt-back stand
Cabinet-mounted attenuator for Foster horn
Tuning mute (sliding switch)
1/4" inputs (Active & Passive)
Gain control (with Pre Amp clip LED)
Aural Enhancer™ control
Bass control (with "Pull Turbo")
Mid-Range Level control
Mid-range Frequency control
Treble control (with "Pull Transparency")
Compressor control (with Compression LED)
Master Volume control (with Power Amp clip LED)
Tube DI Line/Direct (sliding switch)
Tube DI Mute/Line (sliding switch)
Tube DI Ground Lift (sliding switch)
Tube DI Pad control
1/4" Headphone jack
Effects Blend control
Internal Speaker On/Off (rocker switch)
Power On/Off (rocker switch)
BACK PANEL:
AC power outlet (120V version only)
AC power input
1/4" internal speaker jack
Speakon® & 1/4" external speaker jacks
1/4" Tuner Out jack
Effects Loop (1/4" Send/Return)
Tube DI Outputs (XLR & 1/4")
INTERNAL FEATURES:
(2) 12AX7 Preamp Tubes - (Preamp & Tube DI)
Cooling fan
TUNING:
Front slot port. Specially designed to eliminate unwanted noise.
CROSSOVER:
Third order, 6db rolloff, 18db butterworth high pass 4KHz turnover. The crossover is
located inside the Redhead's chassis.
INTERNAL VOLUME:
2.45 cubic feet
CABINET CONSTRUCTION:
5/8" 7 ply, Maple or Birch plywood construction, waterproof glue. All joints Dado and Rabbet, glued and nailed. Extremely heavy bracing.
Power Output 400 Watts @ 4 Ohms (with internal speakers only)
525 Watts @ 2.67 Ohms (with 8 ohm extension speaker)
650 Watts @ 2 Ohms (with 4 ohm extension speaker, US and Canada Only)
Note: Internal speaker impedance is 4 ohms
Impedance (Ohms) 4 Ohms
Speakers (2) 10" custom-designed 8 ohm Eminence® drivers, P/N 0074455000,
(1) Foster® Horn, P/N 0066395000
Channels 1 Channel
Controls Mute On/Off Switch
Active/Passive Instrument Inputs
Gain with Preamp Clip Indicator LED
Aural Enhancer,
Bass with Pull "Turbo"
Midrange with Level and Frequency,
Treble with Pull "Transparency"
Compressor with Indicator LED
Master Volume with Power Amp Clip LED
Tube DI Control:
Line Level/Direct Switch,
Mute/Line Switch,
Ground Lift Switch,
XLR Pad,
Headphone Jack
Effects Blend - Wet/Dry
Internal Speakers On/Off Switch
Power On/Off Switch
Covering Black carpeting with stack lock corners and chrome stamped steel vibration-free grille
Weight 95 lbs. total, with cover
Dimensions Height: 21.25"
Width: 22.5"
Depth: 16"
(with the front cover attached, the depth is increased to 16.75")
Power Handling 400 watts (internal @ 4 Ohms), 650 watts (@ 2 Ohms with 4 Ohm extension speaker)
Tube Complement Two 12AX7 (Preamp & Tube DI)
Accessories N/A
Cover Uses Cover P/N 0066186000, US MSRP $49.95 (Not Included)
Footswitch N/A
Frequency Response N/A
SPL N/A
Suggested Speaker Enclosures Goliath III™
Big Ben™
Son Of Bertha™
Suggested Speaker Combinations N/A
Input Impedance Passive: 1MOhm
Active: 130kOhm
Effects Return: 10kOhm
Output Impedance Effects Send: 220 Ohms
Tuner Send: 220 Ohms
Tube DI Line Out: 600 Ohms
Sensitivity N/A
Signal to Noise Ratio -74 dB (<10 milivolts typical)
Introduced 1/2008
Notice Product Prices, Features, Specifications and Availability Are Subject To Change Without Notice