Peavey ValveKing(R) amps feature a patented, variable Class A-A/B control called Texture(TM), which allows sweepable selection between Class A and Class A/B power structures, as well as any combination of the two. With this feature, guitarists can coax virtually any tone from this tweaked-out amplifier. The amp's preamp and power sections use 12AX7 and 6L6GC tubes, respectively, and drive specially voiced 12" ValveKing(R) loudspeakers (112 and 212 versions only). Additional standard features include two footswitchable channels with independent, three-band EQ and volume, plus a footswitchable gain/volume boost on the lead channel to provide extra volume for solos. ValveKing(R) amps also feature global resonance, presence and reverb controls, a buffered effects loop and dual speaker jacks in parallel (head and 212 only).
Features
* 50 watts (rms) into 16 ohms
* Two 6L6GC and three 12AX7 tubes
* Two independent footswitchable channels
* Separate EQ for each channel
* Footswitchable gain/volume boost on lead channel
* External speaker capability
* 12 inch ValveKing(R) speaker
* Reverb with level control
* Buffered effects loop
* Resonance switch for "tight or loose" cabinet response
* Patented Texture(TM) variable Class A simulation control
* Footswitch not included
PEAVEY VK112 Specs
Rated Power:
50 W(rms) into 16 Ω Power Consumption:
(Domestic)
150 W, 50/60 Hz, 120 VAC Tube Complement:
2 x 6L6GC, 3 x 12AX7/ECC83 Dimensions (H x W x D):
18.25" x 21.38" x 10.25" Weight:
44.5 lbs.
Preamp High Gain Input:
Impedance: Very High-Z, 470 kΩ Preamp Low Gain Input:
(-10 dB Pad)
Impedance: High-Z, 68 kΩ Effects Send:
Low Impedance: High-Z, 22 kΩ
or greater
Nominal Output Level: 0 dBV,
1.0 V(rms) Effects Return: Impedance: Very High-Z, 1 MΩ
Designed Input Level: 0 dBV,
1.0 V(rms) Equalization: (Clean channel only)
Custom Low, Mid, & High passive EQ
Push Bright: +6dB @ ~3.5kHz Equalization: (Lead channel only)
Custom Low, Mid, & High passive EQ
Lead Channel Front Panel Footswitch Functions:
Push Gain: Increase Gain in Lead
channel and introduces a tighter low
end response
Push Volume: +3-5dB Volume boost
(more effect at midway Lead Volume
settings) Remote Footswitch: (optional)
Special 2-button unit with LED
indicators (#00579720) for channel
selection (Channel) and a special
preset Volume Boost and/or Gain
Boost function selectable via the
front panel GAIN (7) and
VOLUME (10) switches described
above (BOOST)
3900 Fiscal Ct, Suite 200
West Palm Beach
Florida 33404
USA
Telephone:1-877-778-7845 Toll Free
or 561-842-7451 Fax: 561-840-9032E-mail Us! Hours: Mon-Fri 10 am -7 pm EST, Sat 10 am -5 pm EST
Peavey ValveKing 112 Combo
