FURMAN PL8PROII Details
PL-8 Series II Power conditioner, featuring Furmans revolutionary SMP technology. Furmans Series Mode Protection (SMP) circuit also features our exclusive Linear Filter Technology (LiFT). Together; these technologies comprise, what is without question, the worlds most advanced and comprehensive transient voltage surge suppressor.
The PL Series II feature LED rack lights which produce virually no heat and provide an extemely long life span (up to 10,000 hours). A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off. Additionally, a rear mounted BNC jack accepts any standard goose neck lamp for rear rack illumination.
The PL Series II has a master switch for the rear outlets that glows red when the power is on. The front-panel circuit breaker can be quickly and easily reset should the unit be overloaded. The PL Series II also features a 10 foot,14 gauge heavy-duty power cable.
Model PL-PLUS Series II is an enhanced version of the PL-8 Series II, offering a 20 segment LED bar-graph meter that displays incomming voltage between 90 and 128 volts in 2-volt steps. The normal range voltages are indicated in green, with moderately and extremely high or low voltages in yellow and red respectively. The voltmeter's accuracy is ±2 volts. It can easily be recalibrated if necessary.
Features
SMP with extreme voltage shutdown
LiFT (Linear Filtering Technology) with zero ground contamination
Two retractable, long-life, low-heat LED light fixtures with dimmer switch for rack illumination
BNC connector on the rear panel allows you to attach any standard goose neck lamp to illuminate the rear of your rack
Eight rear panel outlets and one front panel outlet
15 amp rating, with circuit breaker
Three year limited warranty
FURMAN PL8PROII Specs
Current rating:
20 amps ("E" versions 16 amps)
Operating Voltage:
90 to 140 VAC (“E” versions 180 to 280 VAC)
Over Voltage Shutdown:
140 VAC typically (“E” versions 280 VAC typically)
Voltmeter Accuracy:
PL-PRO II only: ±2 VAC, calibrated with internal trimpot adjustments
PL-PRO D II & PM-PRO II: ±1.5 VAC
Spike Protection Modes:
Line to neutral, zero ground leakage
Spike Clamping Voltage
188 VAC peak @ 3,000 Amps, 133 VAC RMS (tested to UL-1449 and USA / CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
Response time:
1 nanosecond
Maximum surge current:
6,500 amps
Noise attenuation:
10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz
Linear attenuation curve from 0.05 - 100 Ohms line impedance
Mechanical: Dimensions:
Dimensions: 1.75” H x 19” W x 10.5” D. Weight: 11 lbs (5 kg). Construction: Steel chassis, .125” brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
Power consumption:
PL-PRO II, 11 watts
PL-PRO D II, 12 watts
PM-PRO II, 12 watts
Safety Agency Listings:
CE, NRTL-C
Patent number:
CA 1332074 (4,901,183)
Furman PL8PROII Power Conditioner
APEX 950 VOCAL MICROPHONE WITH CABLE
