The Furman HDS-6 Audio Distribution Amp offers a great-sounding, cost effective, and flexible way to provide custom mixes for up to 16 people in recording and live sound environments. The combination of unique functions adds unprecedented functionality and convenience to any multiple-user audio application.
Features
Every performer in a studio or live sound setting can have a personalized mix without any adjustments at the board.
Perfect for use as a headphone system in the studio, plus drives powered monitors in live sound applications.
HDS-6 rackmount audio distribution system connects to the mixer/console to provide interface and power supplies to drive a group of HR-6 remote mixers.
HDS-6 to HR-6 linking cables are included with the HR-6, as is a universal mic stand clamp.
Provides gain trims and overload LEDs for each input, ground lift, and on/off switch, and system status LEDs.
The system consists of 2 components: the rackmount HDS-6 Audio Distribution System, and one or more HR-6 remote mixers (please note that the HR-6 remote mixers are sold separately). Linking the distribution unit and remote mixers is as easy as plugging in cables — multiple HR-6s are simply daisy-chained together. A pair of 25 ft. linking cables is included with each HR-6, and other lengths are easily obtained at your local computer store or through mail order. For applications where daisy chaining is not practical, a 12-port or larger ethernet patch panel can be wired to allow multiple HR-6 units to connect from a central location. Up to 8 HR-6 remote mixers can be linked to an HDS-6, and 2 pairs of headphones may be plugged into each HR-6.
The HDS-6 rackmount distribution system connects to the mixer/console to provide interface and power supplies to drive a group of HR-6 remote mixers. Trimpots are provided on the HDS-6's front panel to match the console output levels to the HDS-6's inputs.
The HDS-6 is ideal as a low distortion headphone driver for the most critical listening situations. In addition to providing high current differential buffered signals, it also provides power and ground to the HR-6 remote mixers.
Inputs
Input Impedance: 20K ohms
Sensitivity: Variable, -10 to +4 dBu for rated output. (adjustable with trimpot on each input)
Outputs
Power Output: 400 mW at 32 ohms (200 mW at 600 ohms, 500 mW at 100 ohms) from 20 Hz to 20 KHz
Connectors
Inputs: 1/4 in. phone, balanced or unbalanced. Outputs: RJ-45 jacks
HDS-6/HR-6 Connecting Cable: 2 each: 10Base-T UTP Ethernet computer cables, Cat. 3 or better
General
Distortion: 0.008% THD at full rated power at 1 KHz; 0.05% THD 20Hz to 20 KHz
Dynamic Range: Greater than 96 dB
Freq. Response: +0, -1 dB from 20 Hz to 20 KHz, 400 mW output
Power Requirement: 120 VAC, 60 Hz, 20 watts
HDS-6 Dimensions (H x W x D): 1.75 x 19 x 7.25 in.
HDS-6 Weight: 6.8 lbs. (3.1 kg)
For most products, Furman has a very generous Limited
Warranty term of three years for defects in materials or workmanship on
registered units. For units that have not been registered, the Limited Warranty
period is twelve months. Our warranty covers parts and labor, with the term
measured from the date of purchase of the new unit by the original owner. The
warranty is not transferable. Extended Warranties are no longer sold, but those
that have been purchased in the past will be honored as long as the contracted
term is in effect.This warranty policy applies only to standard Furman
products. RackRider products and Furman "Performance Series" products have a 90
day warranty term.
Furman Website
3900 Fiscal Ct, Suite 200 West Palm Beach, Florida 33404 USA
Telephone: 1-877-778-7845
Toll Free or 561-842-7451
Fax:
561-840-9032Contact Us! Hours: Mon-Fri 930 am - 630 pm ET/
Sat 11 am - 4 pm ET/Sun: Closed
Zoom / More pics 
Print this Page 
Details 
Specs 
Documentation 
WhyFurman 
More Pics 
Warranty 
Accessories 
