AVIOM A16II-6 Details top
The Aviom System includes:
6 Aviom A-16II Personal Mixers
1 Axiom AN-16/i 16-Channel Input Module
1 Axiom A-16D A-Net Distributor
6 Aviom MT-1 Mic Stand Mounts
1 L-50 Layflat Cat-5e 50 ft. Cable.
The Aviom Pro16 Series defines the industry standard for Personal Monitor Mixing and streaming audio over Cat-5. Pro16 Series products deliver perfect monitor mixes and economical digital audio distribution.
The A-16II Personal Mixer allows each performer to create a unique, customized monitor mix on stage or in the studio.
Mounts easily on a mic stand with the optional MT-1 mic stand mountThe A-16II allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread and master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.
The stereo output from the A-16II can be used to drive wired or wireless in-ears, headphones, powered floor wedges, an amplifier, or spot monitors.
The A-16II Personal Mixer is fully compatible with all Pro16 Series products, including Aviom's digital interface cards for Yamaha® and DiGiCo® digital mixing consoles. As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices.
Mixers can be daisy-chained or connected in parallel using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable.
Features
16-channel stereo mixer
Fully adjustable pan per channel
Line/Headphone audio output
Auto-detect mono/stereo circuitry
Simple set-up with Cat-5e cables
Sixteen Preset locations for storing custom mixes
Channels can be soloed, muted, or grouped
Global trim for reducing all channel volumes
Sixteen channel select buttons with dual LEDs
Pan/Spread control with LED readout
Channel volume control with LED level readout
Master Volume, Treble, and Bass controls
The AN-16/i converts 16 balanced line-level analog audio channels into uncompressed, full bandwidth 24-bit digital audio transmitted via A-Net.
Features
Sixteen balanced audio inputs (TRS connectors)
Sixteen balanced Thru connectors (TRS)
A-Net Out and A-Net Expansion network connections (Cat-5)
Stereo Link switches for each channel pair
Four-position gain switches (+22, +4, 0, -10dB)
Signal present and clip LEDs per channel
The AN-16/i provides 16 balanced line-level inputs into a Pro16 system. Audio is converted to digital and transmitted via A-Net, up to 500'/150m over Cat-5e. A dedicated audio Thru is available for each input channel, allowing the AN-16/i to be seamlessly inserted into an existing audio signal path.
Placed at a front-of-house or monitor console, the AN-16/i can be used as a head-end for a Pro16 Monitor Mixing System. Audio from the console—any combination of channel inserts, direct outs, submixes, auxes, or groups—is connected to the input channels on the AN-16/i. The A-Net Out on the AN-16/i is connected to the A-Net In of a Pro16 Personal Mixer or A-Net Distributor.
Used in conjunction with the AN-16/o Output Module, the AN-16/i can also be used in a digital snake as an input path for main return signals from front-of-house. The built-in A-Net Expansion jack allows two 16-channel A-Net streams to be combined onto a single cable (32x0 or 16x16), and the AN-16SBR System Bridge can be used to combine up to four 16-channel streams onto a single cable in a variety of bi-directional configurations.
The flexibility and simplicity of the Pro16 Series allows complex audio distribution systems and snakes to be created quickly and cost-effectively.
Long Distance A-Net
Fiber-optic technology can be used for digital snake applications that require cable distances that exceed the A-Net maximum length of 500 feet (150 meters) between devices.
The A-16D distributes a 16-channel Pro16 A-Net stream to up to eight additional Pro16 devices
Features
1/2 rack space, 8-output A-Net power and audio distributor with Cat-5 connectors
8 separate rear panel DC power inputs for remote power supplies, no power supply necessary at remote location
Uses same power supply as other A-Net system components
8 ports simultaneously output 16 channels of audio and DC power to remote A-Net personal mixers and devices over single Cat-5 ethernet cable
Parallel connection to remotes for cleaner, simpler system setup
Dedicated front panel DC Power Active LED indicators for each output channel
Front panel Power and A-Net Active LED's
Unlimited number of units may be used for larger system distribution needs
Power supply supports multiple voltages for international use
With one A-Net input and eight parallel A-Net outputs, the A-16D provides a low-cost way to replace daisy-chain connections with star configurations. The A-16D is also capable of distributing DC power out any of the eight A-Net Out jacks, eliminating the need to connect a power supply at each Personal Mixer. Any combination of powered and unpowered connections is possible; simply connect external power supplies to the A-16D on a per-channel basis as needed.
The A-16D is also a cost-effective way to refresh an A-Net signal for long runs in excess of 500ft/150m, to provide a redundant cable path in a digital snake or audio distribution system, and to split an A-Net signal to multiple output locations. There is no limit to the number of A-Net Distributors that can be used in a single system.
Aviom offers premium quality Cat-5e cables in a variety of lengths.
One Cat-5e cable ships with each A-16II Personal Mixer and A-16CS Control Surface. Replacement cables are available for all A-Net products in a variety of lengths. Cables used with A-Net products are standard Category 5e network cables.
Aviom replacement Cat-5e cables are available in lengths of 30, 50, and 100 feet. If you need a longer cable for an application, any computer store should be able to supply you with an appropriate cable. A qualified technician should be able to build custom cables to any length (up to the maximum of 500 feet, 150 meters).
Dimensions:
L-50 50 feet/ 15.2m
Zoom / More pics 
Print this Page 
Gifts 
Details 
Specs 
Demos 
Manuals 
More Pics 
Warranty 
Accessories 
