AVIOM A16D Details
The A-16D distributes a 16-channel Pro16 A-Net stream to up to eight additional Pro16 devices
Features
1/2 rack space, 8-output A-Net power and audio distributor with Cat-5 connectors
8 separate rear panel DC power inputs for remote power supplies, no power supply necessary at remote location
Uses same power supply as other A-Net system components
8 ports simultaneously output 16 channels of audio and DC power to remote A-Net personal mixers and devices over single Cat-5 ethernet cable
Parallel connection to remotes for cleaner, simpler system setup
Dedicated front panel DC Power Active LED indicators for each output channel
Front panel Power and A-Net Active LED's
Unlimited number of units may be used for larger system distribution needs
Power supply supports multiple voltages for international use
With one A-Net input and eight parallel A-Net outputs, the A-16D provides a low-cost way to replace daisy-chain connections with star configurations. The A-16D is also capable of distributing DC power out any of the eight A-Net Out jacks, eliminating the need to connect a power supply at each Personal Mixer. Any combination of powered and unpowered connections is possible; simply connect external power supplies to the A-16D on a per-channel basis as needed.
The A-16D is also a cost-effective way to refresh an A-Net signal for long runs in excess of 500ft/150m, to provide a redundant cable path in a digital snake or audio distribution system, and to split an A-Net signal to multiple output locations. There is no limit to the number of A-Net Distributors that can be used in a single system.
AVIOM A16D Specs
Specifications
A-Net Inputs:
one Category 5 (RJ45 connector)
A-Net Outputs:
eight Category 5 (RJ45 connector)
Remote DC Power Inputs:
eight - Rear panel; accepts power supplies from A-16II or A-16R
Main power input:
one; accepts included DC power supply
Main LED Indicators:
Power On, Yellow
Channel LED Indicators:
A-Net Active, Green
Remote DC Power Active LED:
One per A-Net output
Size:
8.5” (1/2 rack space) wide
6.7” deep x 1.2” high
Options:
Can be rack-mounted on a standard 1U rack accessory shelf
Weight: 2.0 lbs.