APEX 205 Ribbon Microphone

APEX 205 Details ^top

The microphone is the first, and arguably the most important link the signal chain. In the world where digital recording is now the most common recording media, it is more important than ever that you choose a microphone that is able to capture every subtle nuance of your source material.

The compact Apex205 has been designed with todays direct to drive digital recording systems in mind. Its classic ribbon element delivers a warm tone and the most natural sound reproduction available from virtually any style of studio microphone.

The active element of a ribbon microphone is a very thin corrugated aluminum ribbon mounted under low tension between the poles of a strong magnet. The low-tension 2-inch long, 2-micron thick aluminum ribbon used in the Apex205 offers audio reproduction with smooth, natural extended low and high frequency response, yet handles extremely fast transients accurately. Although ribbon microphones are by their nature extremely fragile, the Apex205 can handle high sound pressure levels approaching 165dB range.

The asymmetrical figure-8 pickup pattern has an extended sweet spot on the rear face of the microphone allowing the recording to accurately reproduce the natural space and ambient reverberation of a good sounding live room.

The integrated yoke mic stand mount and internal shock mount assembly protects the fragile ribbon element during use.

APEX 205 Specs ^top

Specifications:

Type: Large Element Ribbon Microphone
Ribbon Type: Pure aluminum
Dimensions: 2 microns thick, 50mm (L) x 5mm (W)
Polar Pattern: Asymmetrical Figure-8
Sensitivity: -55dB
Frequency Response 40 to 18,000Hz (+/- 3dB)
Impedance: < 200 Ohms
Recommended Load Impedance: < 1000 Ohms
Max SPL (1% THD @1kHz): 160dB
Equivalent noise level: 17dB
S/N ratio: 70dB
Diameter: 2inches / 50.5mm
Length: 6.5 inches / 170mm
Net Weight: 31 oz / 870g